The kit is by Fusuno Guys . I Received it a month back . Used the orignal packing to ship other Fuse .
It comes with the retracts supplies and need to be assembled .

I got a Turnigy Lightening system for more scale look along with the scale blades which i might order on later stage.
The light system come with pretty decent price tag of 10 USD almost.

I'll be using the 450 Pro TT Flybarless Kit For this project By ALZRC.

Which will be running on
-ALZRC FBL kit
-SK3 6S 1700Kv Motor
-YEP 60 Amp - Best ESC if you want Low RPM and In Budget .
-Micro BeastX FBL Gyro
-TGY 306 X3 Cyclics Servo
-Savox On the Tail
  
Planning to run 2800-3000 RPM With 11 or 12T slant Pinion

Packing was great and the parcel came in 4 days via DHL.
Kit requires a 9G Servo for the Retracts which control all three wheels Via control Rods . I'll be using the Tower Pro 9MG
Need to assemble many other external parts using 5 mins Epoxy

Best Detailing done on the body
Paint Job is first class as i expected from Fusuno.

The Quality is 100% better then the Hobbyking Cheap Fuselages . You can judge it by the quality of Tail section . The Boom is very strong . They used plenty of material for strength

Got my last Board paper tomorrow , after that i'll be continuing .














Those Gaps For Air looks So sexy  

sweeeet!!

Yep The Best Fuselage I have Ever seen . No Grey , All black !

Awesome dude , good job on the details and photo clarity in your build logs.....good luck  

Thanks FlyJo ! I never thought I'll be enjoying so much clicking and sharing .
Will definitely share more in Heli section from Now Onward .

Here's some snaps in comparison with a MD500 Fuse which is also a 450 Fuse .
MD500 is from the HK Guys . And the quality sucks when compares  
But still 50$ vs 200$ is pretty okay .
I'll Do another thread for the MD500 Repainting and Build log later after these major Ones.









And the 450 which I'll be using is not a brand new kit . But yeah its kinda new only
I gave the specification in above post
I mounted on the side of the frame for easy access after installation in the fuse .
Also I prefer beastX more then VBar as i feel Vbar is bit twitchy and isn't made for scale flying , But Best for Smacking hahaha.
On the other hand BeastX is very smooth for scale flying . It's good for smooth 3D too but just personal preference .
 

Amazing !!definitely a Die HEART Fuselage. A Legend Shape & Legend Choice MINE ALL TIME FAVOURITE ~ Long way to go BROTHER CHEERS  

 @dhruv: lovely model yaaaar    love it    and try to put 4 blade rotor head man it will ad more scale look.   

@ Nithinraj ,,the airwolf looks  scale with 2 blades not 4

Oops sorry.

Thanks Rahul and Nithin .
2 blades will be fine . I just did the retracts assembly .
Uploading !!

Glued the Horizontal Fin Using Araldite 5 min Clear
Will be using same for other parts




Now Assembled retract's pics

Gotta hit and try the linkage rod length measurement for perfect geometry
 










Have to make sure no binding while placing the servo

3 heli builds at the same time not many can do that. This is real talent
Awesome bro

Thanks Neil

For Installing the Lighting system , Need to make clean holes for the LED's .
I'll use a Reamer (https://www.hobbyking.com/hobbyking/store/__7689__Knife_Edge_Reamer_3_14mm_Holesize_.html)




Very Easy to use

Turnigy LED's are directly powered via Rx

-2 Flashing White
-2 Constant White
-2 Flashing Red
-1 Constant Green
-1 Constant Red

wooah! nice when is the maiden??

Great .... Hats off

oye dhruv, want help? i can wire up a custom lighting system if you want...

Thanks Aniket and Docnayeem  

Aniket we discuss that in the evening  
I want 1 extra LED to function only when I put the wheels down ..

Awesome 

Thank you Sir 

As there will be increase in weight and i'll keep rpm low a bit , I changed the Tail servo to TGY 306Hv for better tail holding performance .





Took the Landing Skids Out


The tail case Assembly


And the Support Rods

I needed to bring the tail servo as close to the boom for smooth movement of the Tail servo Linkage

Now I found that i'll need to remove
-Main Gear
-Elevator servo

to make the frame slide inside.  

You can see as the fuse is made for the V2 Design




After removing I slided the frame inside and took the landing skid's hole marking




I got no binding at the aileron servos



And finally it will look something like



Note : I'll have to install elevator and main gear later after installing the 450 in the fuse

So after marking holes for the frame , i installed the retract servo finally and trimmed it .
The wheels assembly is kinda loose from inside so i'll put some gorilla glue later .
Assembly requires lot of patience .

Always while marking holes first try installing the tail assembly , which will give you rough idea about the modding required . Have to make sure - No Binding
I used washers to lift the tail servo and bring the push rod closer to the boom . It's all hit and try method .
Then marking the holes is a pain 
I assembled the tail unit first then did the marking for exact location .

I made a hole near the tail servo so that it doesn't crack the fuse .

Here's few pics and video






Also i reduced the servo speed and travel