Hi Guys
Just received my parcel after 3 month EMS Customs and that also when i went there Personally with the documents  
Still the air parcel guys are troubling me with the other parcels .

I shifted to Torque tubes system last year on the 450's and found lots of improvement in flying performance . It was affordable too.
So bought the TT and DFC kit for 500 now . Less friction , less heat , more efficiency , Batteries come down more cooler etc

I only thing i'm worried about is how long the TT gears will hold on Touch downs  ??  They gave the new BLACK gears which i think is of Mod 0.7 , so lets see. I think all 500 owners have touch down problem as the blades have only 1.5cm clearance .

Here's the pic of the packing . I ordered this from Infinity-hobby.com

500 Torque Tube Drive Assembly H50092A  
http://www.infinity-hobby.com/main/product_info.php?cPath=32_118&products_id=4631&osCsid=7b5c5d7f35ccf942fd40f2748a74e5ee

500DFC Main Rotor Head Upgrade Set H50181
http://www.infinity-hobby.com/main/product_info.php?cPath=32_118&products_id=8036&osCsid=7b5c5d7f35ccf942fd40f2748a74e5ee







I thought the TT system will come with 2 Bearing inside the boom but no , it came with 1 Bearing . Not a problem

Comes with
●Metal tail unit set x 1
●Torque tube drive set x 1(Φ5xΦ6x467mm)
●Torque tube drive bearing holder x 1(Φ14.5x7.5x10mm)
●Tail boom mount set x 1
●Vertical stabilizer mount x 1
●Tail Boom x 1(Φ15xΦ16x461mm)
●Pin x 3(Φ1.5x8.8mm)
●Bearing MR128 x 4(MR128)
●Bearing MR106ZZ x 1(Φ6xΦ10x3mm)
●Bearing 684ZZ x 4(Φ4xΦ9x4mm)
And all screws etc

Note :
For clone owner , Please make sure that you cross check all tail components with your old ones.
The Hiller Etc clone's Control arm (L-shaped) are almost flat and can't be used with this kit.
So you need to get new one . AGAIN we don't need 500 PRO parts , only the ESP parts are compatible  
I didn't had the Control arm and the blade grips so i ordered them again from Infinity Guys via DHL

Amazing service I must say , Very co-operative and answers the Mail fast
Ordered 7AM , order shipped via DHL @ 9AM approx same day






The DFC head comes with
 
●500DFC Main Rotor Head Assembly x 1
●500 Feathering Shaft Sleeve x 1
●500 Damper rubber x 2
●500DFC Main Blade Grip Arm x 2
●500DFC Main rotor grip arm integrated control link x 2
●500DFC Main rotor grip linkage bearing sleeve x 2
●682ZZ Bearing(Φ2.5xΦ6x2.6mm) x 4
●500DFC Linkage rod A(M2.5x12mm) x 2
●600PRO Elevator ball link x 2
●500DFC Main Shaft x 1

Note : Still requires the Thrust Bearing , Feathering shaft and the Align Main Blade Grips from the old head

I didn't had the Align Grips as I had Tarot Head installed . I used my old Thrust Bearing , Feathering shaft etc.

The DFC main shaft (Included) is shorter then the normal shaft which makes the heli look low profile . The gap between the blade grip and anti-rotation is just 1cm approx  

This thread is not for 2014 Sweepstakes

Here's the 500 Running on TAROT FBL head with Robird System and The belt casing .
It's pretty old but works fine .

As i said i'll have to use the old thrust bearing , feathering shaft etc .

Starting with the TT .
Here's the bearing with holder for the tube.





Then you can use CA to mount the bearing on the tube or use tape .




The tape will avoid movement of the bearing.
Need to find proper CG on the tube to avoid Vibrations and yes re-lubing  .
And then spray Silicon oil inside the boom and slide the tube in

Tail Case
Comes already assembled but no threadlock , so definitely threadlock them.
The Gear feels sturdy . The best upgrade i think Lol







All threadlocked and the Fins attached









I think we can use the Dual pitch Slider too with this Tail case but i'll use the old ones.

The Control Arm I'm using is of 500 Pro which causes little binding at the corner near the tail grips.
I avoided that using the limits . I'm using 3 washers for smooth transition

DFC Head Assembly

Some pics before the maiden

Good detailed information on torque tube assembly. Thanks!

Looks pretty cool...  Landing skids - love it..

Thanks Sujit Did you switched to TT's ?

Thanks Avesh ! No comments on that Fusuno hahaha ?

nice it screams 3d ...some one will not like the sound of that lol

Hahahah Yeah sounds insane and 17T  
Sound will be a bonus for scale Fuse

if u stay there y have u parked in guest parking

X5 Own that place 
Others are guest

 BMW X5 or the gaui x5    ....

btw the 500 looks super cool and sporty with those landing skids and the fusuno on
 ..awesome job 

Hahaha Gaui X5
Thanks Joe ....