I am new to heli, thought of starting the hobby , so i bought hausler 450 v2 to start off,did all the pre flight check, it hovered a little banked to the left and freaking crashed  .I was just wondering is there anybody who can help me fix it you know just tell me what are the defects and what has to changed...

Mahesh,

Man, that hell is not to be flown "straight off" when you get it.

From the sound of your post, it seems you have very little experience in flying a 3D hell (if at all), have you practiced on SIM?

What had broken or needs fixing will have to be closely checked, you need to look into various parts and see if anything is not looking OK.

You should visit a flying field and experience some flying with experienced people to get started, and showing your hell to them will be a much quicker way to analyse the issue and get it sorted out. You will need to read A LOT and learn before you can do things yourself.

bro i am in ghaziabad too could you help me out just check out what problems are there and i will get it fixed.
And ya checked out the sim will start with that.

First I think you have practiced in simulator Because it need practice very much.

I wish you had got on this forum or something like this before you started flying helis as a beginner to RC.  Fact is, without sim practise you are sure to lose a lot of money if you try to learn flying on a real heli as an absolute beginner (on a collective pitch heli).

Normally, for training we insist that the flyer spend as many hours on a sim so that they can hover "nose in" and fly circuits comfortably, before trying to fly a heli on their own.  Even then, it is best to be on a buddy cable with an experienced flyer.

So stop messing with the heli for now, and spend enough time on a sim before you do anything with it (other than fixing it). 

Thanks a lot guys i learned a very costly lesson  ya gona start with sim..

Hey mahesh mistakes happens with everybody thats no problem my friend i am also a begineer and i also make mistakes so
No worries,
Regards,
Aman.

Thanks bro

@Anwar Came to know about the forum after i crashed

Mahesh,

No worries, will be more than happy to look at your heli and guide you on how to fix it.

PM me your phone number and we can take it from there.

recently i met a senior doctor who had interest in helis and which let him buy a hausler v2. Unfortunatly heli was crashed as it was directly started in 3d mode + Stair Fall  which resulted in broken blades and etcc. Now see the masoomiyat , he glued the main wooden blades. See this hobby requires a few prerequisite ,research and some $ in stack.

No problem Mahesh Bro

lol avesh
...and loads of time to repair