|
Title: BELT CP help Post by: hangingtough on May 06, 2010, 10:50:01 PM Hi,
I am currently rebuilding a belt cp that went from 1 feet to 0 in a zippy due to wrong negative pitch setup. So i ordered a main frame , boom, blades , feather and main shaft from Ebay. But now when i try to put the frame together i find the tail drive gear is away from the main gear altogether. I thought it is a frame issue and got a replacement from the vendor, but surprising the same problem as in the first frame. Does the Belt CP V1 and V2 have different frames. Can anyone suggest where i am going wrong ? Title: Re: BELT CP help Post by: anwar on May 07, 2010, 12:28:10 AM Can you post a close up of the issue ?
Just downloading the manuals of both, and checking the part numbers will give you a good idea about whether the frames are the same. Title: Re: BELT CP help Post by: Hellyflyer on May 07, 2010, 02:55:51 AM Hey Manpreet,
I think the frame for V1 and V2 are same but I think u need to explain the issue a little more like is the gear far away from the main gear in the frame or is not meshing up with the frame, or like anwar said posts some pics with the issue. Hellyflyer |