RC India
Welcome Guest, please login or register.
 
Pages: 1 [2]  All   Go Down
0 Members and 1 Guest are viewing this topic. Topic Tools Topic Tools 
Read
« Reply #25 on: March 24, 2011, 11:31:20 AM »
get_sat
Plane Lover
Active Member
**

Reputation Power: 2 
get_sat has no influence.
Offline Offline

City: Bangalore
State: Karnataka
RC Skills: Beginner
Posts: 93
Join Date: Mar, 2011



I Bought it from rotor,
So if rajesh can suggest, it will be great
Logged
 

Read
« Reply #26 on: March 24, 2011, 11:44:50 AM »
ujjwaana
Plane Lover
Forum Hero

*****

Reputation Power: 28 
ujjwaana barely matters.ujjwaana barely matters.
Offline Offline

City: Bangalore
State: Karnataka
RC Skills: Intermediate
Posts: 2384
Join Date: Oct, 2009



Hi Satish,
As we saw that the ESC+Motor is all fine and when putting the Throttle Stick on either ends, it also gives a beep, why dont you try the Throttle reversing as Anwar has mentioned (Page 30 of the Futaba Manual). Just reverse the throttle (CH 3) and connect the LiPO to ESC.

Logged

Futaba 8FG Super | HK-450v2 | FA-22 Raptor |AXN Floater-Jet | FunJet | Black Horse Edge 540 | Amp Master 015 | 2.3M Big Brother
 

Read
« Reply #27 on: March 24, 2011, 12:53:52 PM »
get_sat
Plane Lover
Active Member
**

Reputation Power: 2 
get_sat has no influence.
Offline Offline

City: Bangalore
State: Karnataka
RC Skills: Beginner
Posts: 93
Join Date: Mar, 2011



Hi Ujjwaan,

I have already tried that and nothing happened, Infact yesterday when you tried it was in reverse
Logged
 

Read
« Reply #28 on: March 24, 2011, 12:56:41 PM »
anwar
Administrator
Forum Hero

*****

Reputation Power: 141 
anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!
Offline Offline

City: Doha (Qatar) & Thrissur
State: Kerala
RC Skills: Advanced
Posts: 11619
Join Date: Mar, 2009

RC India - Flying and racing with open minds !



Are you careful about the position of the switches on the 7C TX ? Should not be an issue if throttle cut etc are correctly setup, but it would be a quick test.  Can you remove the main blades, and try inreasing throttle with the switches at various positions ?

Also, I hope you have a valid throttle curve !
Logged

Hangar : Please see my introduction.
RC India forum and me : About this forum.
 

Read
« Reply #29 on: March 24, 2011, 01:12:35 PM »
get_sat
Plane Lover
Active Member
**

Reputation Power: 2 
get_sat has no influence.
Offline Offline

City: Bangalore
State: Karnataka
RC Skills: Beginner
Posts: 93
Join Date: Mar, 2011



I have done that, tried various config, i have still not connect the blades to the motor,
I have got some points from the web about this gyro let me try that today evening
Logged
 

Read
« Reply #30 on: March 24, 2011, 03:16:22 PM »
RotorZone
Forum Administrator
Forum Hero

*****

Reputation Power: 8 
RotorZone has no influence.
Offline Offline

City: Bangalore
State: Karnataka
RC Skills: Advanced
Posts: 607
Join Date: Mar, 2009

RotorZone.com



Anwar keeps associating me with mini titan though my only experience with it is setting it up for a friend once.

I Bought it from rotor,
So if rajesh can suggest, it will be great

Think you are confusing Rotor and RotorZone. I'm sure I didn't sell to you. I'll not be in station till May. If you still haven't resolved it by then, you can bring it over.
Logged

 

Read
« Reply #31 on: March 24, 2011, 06:06:49 PM »
anwar
Administrator
Forum Hero

*****

Reputation Power: 141 
anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!
Offline Offline

City: Doha (Qatar) & Thrissur
State: Kerala
RC Skills: Advanced
Posts: 11619
Join Date: Mar, 2009

RC India - Flying and racing with open minds !



Anwar keeps associating me with mini titan though my only experience with it is setting it up for a friend once.

"What man has done, man can do" Grin
Logged

Hangar : Please see my introduction.
RC India forum and me : About this forum.
 

Read
« Reply #32 on: March 25, 2011, 10:20:38 AM »
get_sat
Plane Lover
Active Member
**

Reputation Power: 2 
get_sat has no influence.
Offline Offline

City: Bangalore
State: Karnataka
RC Skills: Beginner
Posts: 93
Join Date: Mar, 2011



Hi All,

Atlast i could get the motor running

I changed My radio to Airplane mode and it worked, I had changed it to Heli mode as is the practice. yesterday I had read abt this in some forum to try TG6100 on ARCO Mode

alas it worked
Thanks for all the support Smiley
Logged
 

Read
« Reply #33 on: March 25, 2011, 10:28:40 AM »
santhosh
Heli Lover
Forum Hero
*****

Reputation Power: 7 
santhosh has no influence.
Offline Offline

City: thrissur
State: Kerala
RC Skills: Beginner
Posts: 507
Join Date: Mar, 2009



how can u program all the heli features in airplane mod Head Scratching
Logged
 

Read
« Reply #34 on: March 25, 2011, 11:00:54 AM »
get_sat
Plane Lover
Active Member
**

Reputation Power: 2 
get_sat has no influence.
Offline Offline

City: Bangalore
State: Karnataka
RC Skills: Beginner
Posts: 93
Join Date: Mar, 2011



That is what iam figuring it out, I will update once i do those
Logged
 

Read
« Reply #35 on: March 25, 2011, 01:42:29 PM »
anwar
Administrator
Forum Hero

*****

Reputation Power: 141 
anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!
Offline Offline

City: Doha (Qatar) & Thrissur
State: Kerala
RC Skills: Advanced
Posts: 11619
Join Date: Mar, 2009

RC India - Flying and racing with open minds !



I changed My radio to Airplane mode and it worked

Please change it back to Heli, and set the swash type of "H-1".  It is same as airplane, except that you will get access to throttle curve pitch curve etc.  It is done from the PARAMETER menu.  Remember that changing the type may reset all model settings, so you will have to do reversing etc again.
Logged

Hangar : Please see my introduction.
RC India forum and me : About this forum.
 

Read
« Reply #36 on: June 30, 2011, 08:32:37 PM »
pradeepdasgupta
Plane Lover
Senior Member
***

Reputation Power: 3 
pradeepdasgupta has no influence.
Offline Offline

City: New Delhi
State: Delhi
RC Skills: Beginner
Posts: 139
Join Date: May, 2011



Hi Get_Sat
Did you finally manage to sort out your MT motor problem? I am really keen to know.
Regards
Pradeep
Logged
 

Read
« Reply #37 on: July 13, 2011, 04:01:23 PM »
heliman
Heli Lover
Active Member
**

Reputation Power: 1 
heliman has no influence.
Offline Offline

City: Chennai
State: Tamil Nadu
RC Skills: Beginner
Posts: 7
Join Date: May, 2011



I think u have to program the ESC. Its very simple.

1) Disengage the motor from main gear.
2)switch on the transmitter with the throttle at maximum position.
3) Switch on the receiver with motor and ESC connected.( you will not hear any sound)
4) now move the throttle stick all the way down now you will hear the 4 beeps( tu tu tu tu)
    now just leave the ESC to complete all other programs to be in factory settings. you will hear multiple beeps...do not touch      the throttle stick unless u want to chage any of the factoiry settings
5) now the end points for the throttle are programmed for ur transmitter ,. now it sould respond to your throttle inputs.


6) try searching the the user manual for ACE RC ESC BLC 40 there its written clearly how to program the ESC

All the best.
Logged
 

Read
« Reply #38 on: July 13, 2011, 05:48:06 PM »
pradeepdasgupta
Plane Lover
Senior Member
***

Reputation Power: 3 
pradeepdasgupta has no influence.
Offline Offline

City: New Delhi
State: Delhi
RC Skills: Beginner
Posts: 139
Join Date: May, 2011



For what my meagre experience is worth, I did not try to re-programme the ESC. Just connected everything up bypassing the gyro (except the rudder servo as I am not using the mixing function of the gyro). Needed to reverse the throttle settings though, and had to level the swash plate by re aligning the three servo arms. Programmed the throttle and pitch curves according to the MT booklet (beginners settings) and everything seems to function properly. No problems at all.
Now only a test flight will tell the whole story!
Logged
 

Pages: 1 [2]  All   Go Up
Jump to:  

Related Topics
Subject Started by Replies Views Last post
Mini Titan motor/ESC getting hot.
Helis
gauravag 10 8062 Last post March 28, 2010, 12:17:35 PM
by gauravag
TT Mini Titan E325 Helicopter PRO (incl. ESC, Motor, Battery & servos and gyro)
For Sale - Completed
gauravag 15 11013 Last post May 05, 2010, 06:50:53 PM
by gauravag
Mini Titan V2
Helis
anwar 0 2465 Last post April 15, 2010, 12:47:02 PM
by anwar
Brand new in box TT mini Titan E325 helicopter with servos,ESC,Motor, gyro, batt
For Sale - Completed
sa 5 5380 Last post May 05, 2010, 02:00:20 PM
by sa
Thunder Tiger Mini Titan E325 PNF / Lipo / charger
For Sale
dhruvafreak 6 3775 Last post October 28, 2014, 11:12:00 PM
by manish.karnik