Title: Hiller 450 v2 Post by: yashodhanp on October 04, 2012, 07:12:52 AM Hey guys, I have ordered a hiller 450 v2 from rcbazaar, I would like to know what parts would I need to build it. (Extra/that isn't supplied in the kit)
I have ordered the motor, ESC and I have the servos lipo etc. Only I need to know extra screws bolts etc? And any other recommendations This is my first heli build, so I dunno what parts I will need. Pls help me out. Any upgrades are welcome. Title: Re: Hiller 450 v2 Post by: heliboycochin on October 04, 2012, 10:25:27 AM just ask with rc bazzar.. they are ready to help you.. :hatsoff:
best of luck.. happy landings Title: Re: Hiller 450 v2 Post by: ebinmoothedam on October 04, 2012, 01:32:55 PM Dear Yashodhanp
This should give you a good start --> Hiller Build Log (http://www.rcindia.org/helis/hiller-beginner-450-ccpm-detailed-build-log/) You can also refer to the videos posted in YouTube under the channel name RcBazaar. I would advice you to buy few extra sets of screw-set for the model. The ones that come along with the kit are not of great quality and they strip off very easy. Happy building. Title: Re: Hiller 450 v2 Post by: heliboycochin on October 04, 2012, 01:36:45 PM :hatsoff:
Title: Re: Hiller 450 v2 Post by: yashodhanp on October 04, 2012, 02:13:00 PM Hey guys, thanx for ur inputs... But for some reasons I was unable to pay for the order, so won't be getting the heli, sorry for any inconvenience caused :'(
Title: Re: Hiller 450 v2 Post by: yashodhanp on October 05, 2012, 07:20:14 PM Good news guys, i have managed to pay for it, and now pls. Give in your inputs again......
Title: Re: Hiller 450 v2 Post by: ebinmoothedam on October 05, 2012, 07:57:22 PM pay us money and we will search for "inputs" for you. or you can search around the forums and get the "inputs" yourself.
Title: Re: Hiller 450 v2 Post by: yashodhanp on October 11, 2012, 01:30:32 PM Guys, is the screw for the motor included in the kit?? I cant find it anywhere.., neither did any screws come with the motor, so can some one help me out?? I am not able to mount the motor
Title: Re: Hiller 450 v2 Post by: yashodhanp on October 11, 2012, 01:33:07 PM The motor is an odin 3800
Title: Re: Hiller 450 v2 Post by: saikat on October 11, 2012, 06:05:33 PM the screws will not be with the kit - use some ingenuity - check out your
nearest computer repair guy/cyber cafe - old dvd drives etc have similar type screws. a lot of 3 pin electrical plugs/sockets too. |