|
Title: Model art Co axial Heli 3 channel RTF : Rs 1750/- MRP + courier Rs 100 Post by: rcforall on January 23, 2010, 06:39:23 PM Just received stocks of Model art 3 channel coaxial Heli .
Flies out of the box literally . This tiny heli looks great and flies great as well : Will try to get a video and some photos ASAP. Price : Rs 1750/MRP + courier Rs 100/- Sai Title: Re: Model art Co axial Heli 3 channel RTF : Rs 1750/- MRP + courier Rs 100 Post by: rcforall on January 28, 2010, 02:02:20 PM Here is a Video of the Heli :
http://www.youtube.com/watch?v=OCDx5wvcKQE Sai Title: Re: Model art Co axial Heli 3 channel RTF : Rs 1750/- MRP + courier Rs 100 Post by: anwar on January 28, 2010, 03:00:42 PM Nice :thumbsup:
Is it the same one Rajesh was flying earlier ? Title: Re: Model art Co axial Heli 3 channel RTF : Rs 1750/- MRP + courier Rs 100 Post by: sriharishine on January 28, 2010, 08:58:07 PM I am ready to buy if it is Rs 1400 + Courier (Rs100).
Title: Re: Model art Co axial Heli 3 channel RTF : Rs 1750/- MRP + courier Rs 100 Post by: rcforall on January 29, 2010, 06:11:05 AM I am ready to buy if it is Rs 1400 + Courier (Rs100). This is a new product wit MRP fixed by the main importer so if you can get it for Rs 1400 any where please go ahead and buy it from there. I am sorry I do not bargain and haggle on pricing. The prices mentioned here or on E bay are fixed . rgds sai Title: Re: Model art Co axial Heli 3 channel RTF : Rs 1750/- MRP + courier Rs 100 Post by: rcforall on January 29, 2010, 07:34:22 AM Venkat destroyed a cheap LED torch and attached a search light to the heli and though it looks big for this heli it worked fine .
Taped the light below the heli at CG and it flew great , the duration of flying reduced from around 10 mins to 4 mins thanks to this mod ;D Here's a video : http://www.youtube.com/watch?v=pi73pRZjgRI Sai Title: Re: Model art Co axial Heli 3 channel RTF : Rs 1750/- MRP + courier Rs 100 Post by: RotorZone on January 29, 2010, 11:57:53 AM Is it the same one Rajesh was flying earlier ? It is the same. Comes with 3 different type of bodies. I'm not sure if Sai included a crash in the video to show how tough the model is built, but it can take a lot of beating and not get affected at all. Title: Re: Model art Co axial Heli 3 channel RTF : Rs 1750/- MRP + courier Rs 100 Post by: rcforall on February 18, 2010, 02:44:28 PM Here is more professional Video :
http://www.youtube.com/watch?v=EGW_OhzO2iE Available here on E bay : http://stores.shop.ebay.in/rcforallin_Model-Art-Helis_W0QQ_fsubZ1437663010QQ_sidZ675641320QQ_trksidZp4634Q2ec0Q2em322 Sai Title: Re: Model art Co axial Heli 3 channel RTF : Rs 1750/- MRP + courier Rs 100 Post by: pankaj on February 21, 2010, 10:46:10 PM where is the video ;D
Title: Re: Model art Co axial Heli 3 channel RTF : Rs 1750/- MRP + courier Rs 100 Post by: ankur on February 21, 2010, 11:12:13 PM ur flash plugin is missing please install it to see the videos
Title: Re: Model art Co axial Heli 3 channel RTF : Rs 1750/- MRP + courier Rs 100 Post by: pankaj on February 22, 2010, 01:49:04 AM im a beginner in rc :( but not in computers ;D i have latest flash plugin :o
BTW thanks for the info ankur...... :salute: Title: Re: Model art Co axial Heli 3 channel RTF : Rs 1750/- MRP + courier Rs 100 Post by: praveen on February 22, 2010, 10:21:32 AM hi guys ,
i have just purchased this from Mr H S Kalsi from delhi ,for only 1000/- its really good heli to fly in indoors & its more stable too ! happy landings :) :) :) Title: Re: Model art Co axial Heli 3 channel RTF : Rs 1750/- MRP + courier Rs 100 Post by: prakshaal on February 22, 2010, 08:28:28 PM Hi pravven, u bought it new in Rs. 1000/- frm Mr. kalsi ? :-[
Title: Re: Model art Co axial Heli 3 channel RTF : Rs 1750/- MRP + courier Rs 100 Post by: praveen on February 23, 2010, 10:27:28 AM yep,
it was the last piece with him anyhow he will arrange for some more ! ;D ;D ;D Title: Re: Model art Co axial Heli 3 channel RTF : Rs 1750/- MRP + courier Rs 100 Post by: ankur on February 24, 2010, 02:05:30 PM im a beginner in rc :( but not in computers ;D i have latest flash plugin :o http://www.rcindia.org/self-designed-diy-and-college-projects/diy-build-your-own-f22-raptor/msg790/#msg790BTW thanks for the info ankur...... :salute: Title: Re: Model art Co axial Heli 3 channel RTF : Rs 1750/- MRP + courier Rs 100 Post by: lemuel on February 24, 2010, 05:48:33 PM just got the modelart rc helicopter.. just started flying like one hour ago.. the controllers are not very accurate... but how much can u get in 1750 eitherways..overall great helicopter.. loads of fun too fly!!.. having a blast :D
btw can someone advice me which heli should i get next after this one.. this happens 2 be my first heli btw !!:D Title: Re: Model art Co axial Heli 3 channel RTF : Rs 1750/- MRP + courier Rs 100 Post by: speedracer on March 04, 2010, 10:21:16 PM where can i get a spare top blade(main rotor blade) for this heli???
Title: Re: Model art Co axial Heli 3 channel RTF : Rs 1750/- MRP + courier Rs 100 Post by: anwar on March 05, 2010, 01:10:21 AM Looks like it is sold out at most places. I hope the local sellers can arrange some.
Please see the first few search results : http://www.google.com.qa/search?hl=en&q=eagle+6010+main+blades Looks like xheli.com will have it in stock in couple of weeks. Title: Re: Model art Co axial Heli 3 channel RTF : Rs 1750/- MRP + courier Rs 100 Post by: speedracer on March 05, 2010, 01:46:12 PM thanks anwar :)
Title: Re: Model art Co axial Heli 3 channel RTF : Rs 1750/- MRP + courier Rs 100 Post by: akarshad on March 21, 2010, 10:04:03 PM i am looking for some spare for modelart heli. Can someone pass me the number for Sai.
thanks Arshad Title: Re: Model art Co axial Heli 3 channel RTF : Rs 1750/- MRP + courier Rs 100 Post by: rajsigma on March 21, 2010, 10:10:21 PM NO OF SAI 09380577074
Title: Re: Model art Co axial Heli 3 channel RTF : Rs 1750/- MRP + courier Rs 100 Post by: akarshad on March 21, 2010, 10:23:21 PM thanks a lot Raj
Title: Re: Model art Co axial Heli 3 channel RTF : Rs 1750/- MRP + courier Rs 100 Post by: akarshad on March 21, 2010, 11:04:13 PM the problem which i am trying to solve i a problem with my Modelart 3Ch heli. it flew for a few days and then the tail rotor stopped working. I took to model art and they said the PCB and the motor is gone. Replaced both and within another 5 min of flight the tail rotor stopped working again. Not sure whats wrong. The plan lifts and flies, but the tail rotor diesnt spin. Anyone seen this?
Title: Re: Model art Co axial Heli 3 channel RTF : Rs 1750/- MRP + courier Rs 100 Post by: akarshad on March 23, 2010, 02:08:41 PM problem solved. the soldering on the new board came off killing the tail rotor. fixed.
Title: Model Art 3ch heli- sequence of problems and resolution Post by: akarshad on April 21, 2010, 11:24:02 AM ModelArt heli issue.. Resolved.. the sequence of events..my version
1. Tail motor stopped working- ModelArt folks said the board and tail motor gone and needs replacement- Rs 550- replaced both 2. Within 20 min of flight the tail motor stopped working- ModelArt said, the solder was loose for the tail motor- resoldered. started working again 3. Within a day the problem reappears and had a burning smell from the canopy- initial response from ModelArt was that motor is gone, which i suspected as the power from the borad generally dont burn the motors, tested this and proved that motor was still good. 4. ModelArt replaced the main board free of cost and everything became alright. Looks like all this was triggered by the soldering that happened during step 1 Lesson- not always tail rotor is a suspect, view the soldering done in the board, ensure that you call/inform them as soon as the problem occurs or even better will be to test it atleast for one full charge cycle Title: Re: Model art Co axial Heli 3 channel RTF : Rs 1750/- MRP + courier Rs 100 Post by: kaushalsakaria on April 27, 2010, 11:42:51 PM Can i get the contact info for Mr Kalsi.. i want to buy one...
Title: Re: Model art Co axial Heli 3 channel RTF : Rs 1750/- MRP + courier Rs 100 Post by: anwar on April 28, 2010, 12:04:04 AM Please look under "Delhi" in this thread: http://www.rcindia.org/rc-outlets-and-resellers/mega-list-of-all-rc-outlets-in-india/
PS: Not trying to duplicate information... that way, if it changes, we have only one place to change. Title: Re: Model art Co axial Heli 3 channel RTF : Rs 1750/- MRP + courier Rs 100 Post by: kaushalsakaria on April 28, 2010, 12:27:44 PM Thank you Anwar for providing me the seller details..
Need some more info or help, since i am just New to this Game...... I am plannin to buy Modelart Heli .. there is two model one is for Rs1750 and other is for Rs 2250 (with gyro). please guide me which one should i go for ..? or any other is better please guide me , so i can buy in delhi... kaushal 9891151952 Title: Re: Model art Co axial Heli 3 channel RTF : Rs 1750/- MRP + courier Rs 100 Post by: anwar on April 28, 2010, 12:43:05 PM I have no experience with these specific models, hopefully someone who has tried both (or knows more about both) will respond.
In general, the one with the gyro would be easier to fly, but may take away from the learning curve that will help you later on with bigger helis. Title: Re: Model art Co axial Heli 3 channel RTF : Rs 1750/- MRP + courier Rs 100 Post by: akarshad on April 29, 2010, 12:07:22 PM I have experience in using one (without gyro) and seeing someone else use the other one. If you are someone who enjoys a relatively steeper learning curve go for the one without gyro. Its like trying to learn riding cycle with the side wheels and without side wheels.
Even the one without gyro, i am sure you will get bored within a few weeks, if not lesser. Other than flying around, other things you can try learning with that is precision landing,a.k.a CD case landing(which is tough without a gyro) and flying through narrow spaces. My vote for the one without gyro just for the cheap thrill that it gives(like a i cant buy a Prado, so let me have a scorpio kind of :)) Title: Re: Model art Co axial Heli 3 channel RTF : Rs 1750/- MRP + courier Rs 100 Post by: anwar on April 29, 2010, 12:14:21 PM Even the one without gyro, i am sure you will get bored within a few weeks, if not lesser. Other than flying around, other things you can try learning with that is precision landing,a.k.a CD case landing(which is tough without a gyro) and flying through narrow spaces. One of the things that I used to play with on such models (4 channel ones) is to try backwards flying (circles and figure-8s). Such self imposed targets greatly enhance the fun/challenge with these. Choose a big room, or outdoors on very calm days though. Title: Re: Model art Co axial Heli 3 channel RTF : Rs 1750/- MRP + courier Rs 100 Post by: akarshad on April 29, 2010, 12:17:33 PM good idea.. reverse flying 8 :) will try that till i get my MSR delivered on May 6th ;D
Title: Re: Model art Co axial Heli 3 channel RTF : Rs 1750/- MRP + courier Rs 100 Post by: kaushalsakaria on April 29, 2010, 06:08:49 PM Thank you for your reply and guidance. As I am beginner on flying hobby. Can any one suggest me which Heli should I go after this Modelart one.
If you can provide me the some name and model numbers which I can buy later to get into intermediate Level and so on.. I’ll be very grateful to you. I am planning to get it from aboard since in India it is costlier, I have seen yesterday one “Raptor” would be around Rs. 60,000. One I have seen in toyshop “M-Series” RS 3500 (bigger the Modelart heli) do you have idea how it is to flying like me as beginner. kaushal Title: Re: Model art Co axial Heli 3 channel RTF : Rs 1750/- MRP + courier Rs 100 Post by: anwar on April 29, 2010, 07:22:10 PM If you are looking for electric ones, something like
1. Belt-FP 2. Belt-CP 3. Hobbyking clones of the Trex 450 series 4. Walkera Creata 5. Thunder Tiger Mini Titan The first two are simpler, the others are a bit more complicated. Others may please pitch in. Title: Re: Model art Co axial Heli 3 channel RTF : Rs 1750/- MRP + courier Rs 100 Post by: jalanbk on May 05, 2010, 12:35:54 PM I have this Modelart heli (6010) recently purchased...
It flies well till yesterday but yesterday evening the switch on heli got broken... Now I can not swith it on or off, it seems it has a 2 way switch, with broken switch it is neither in charge mode or fly mode... Any idea who can repair it ?? I can not find spare switch anywhere so I can not fix it for sure and electronic stores dont sell so small 2 way switch Title: Re: Model art Co axial Heli 3 channel RTF : Rs 1750/- MRP + courier Rs 100 Post by: akarshad on May 05, 2010, 01:40:33 PM not sure about delhi, in bangalore the modelart showroom stocks almost all spares. why dont you make a call and ask that guy whether he can courier the switch to you.
Title: Re: Model art Co axial Heli 3 channel RTF : Rs 1750/- MRP + courier Rs 100 Post by: jalanbk on May 05, 2010, 01:49:41 PM even if they courier I don;t think I can fix it...
The board is too small for my soldering skills.. I have a shaking hand problem and I can not solder such a small part.. I need someone who can repair... Title: Re: Model art Co axial Heli 3 channel RTF : Rs 1750/- MRP + courier Rs 100 Post by: kaushalsakaria on May 05, 2010, 04:47:40 PM you can find the Modelart showroom in Saket select city walk in new delhi. they do fix and repaired heli. i got my modelart heli repaired yetserday. they do change motherboard (with power button) Rs 600. for small heli which i have.
do contact them. tel: 011- 40566966 -kaushal |