Guys,
Been very busy with work all this time, but am back and have started working on the CH53.
Today I set up the gyro with the tail motor and ESC.
I am using a 40A ESC for the main motor,
25A ESC for the tail motor,
1000Kv BL tail motor and a 3700 Stock Belt main motor.
Tx is KDS K 7x and Rx is from HK
Gyro HK 401
What happens is :
Upon starting the Tx, the main ESC gets initialized, followed by the tail ESC, and the Gyro.
When I try applying throttle, nothing happens.
When I move the rudder stick to the left the motor spins up but when I move the rudder to the right, the motor is dead silent..again nothing happens..
Is ths normal?
assuming that because the main motor rotates CCW the right rudder does not spin but does it not have to spin as I throttle up ?
Will be giving in more info tomorrow as time is little.
again:
tail motor - not spining as I increase throttle.
only left side rudder makes the tail motor spin.
regards,
D