RC India

Hi flyers!
Need help with depron plans.... HLG's / Chuck gliders only .... for my 2 sons
Mail on vijayraj67@yahoo.com will be appreciated
Thanks

Let me know what kind of plans you want or aircraft that you want to build. I have a few plans and will happily send them to you.

Regards,

VC

Have sent you some plans. Pl check yr mail.

Regards,

VC

Hey VC, Send for me to sriharishine@gmail.com, If possible send all your collections...

Shrihari, I have sent you the plans. I have also included some balsa Chuck Glider / Catapult glider plans. Pl check and revert.

Regards,

VC

hey VC, I have not receive the plans... Did you sent to the right email address?

Got a weird message from your mailbox which said that my mail was wait listed!!!

" Hello Vikramaditya Chaudhury,

Your message about "Fw: Depron / Balsa Gliders" was waitlisted.

Please add yourself to my Guest List so your messages will be delivered to my Inbox. Use the link below.

Click here to deliver your message

Thank you,
sriharishine@gmail.com "

Basically, it is forcing me to click on a link to download some software from www.boxbe.com. Since I do not click on unknown links, perhaps the message is still waiting somewhere in the ether. I have no intention of downloading some software like Boxbe that I don't need. Hope you will understand. If you give me an alternate email id, I would be glad to resend the message to you.

Regards,

VC

Now I got the mail... Thanks... the stuff is really good.

Thanks

hey VC,
why dont you post it here!! many others will benefit.. I also want them!!
BTW, have sent u the packet thru registered parcel on sat. let me know when u get it

MPP,
I would love to post them here, however, Anwar sahab, may have some issues with that. We need to be careful about copyright and stuff like that. Posting links to plans are permissible but posting entire plans may raise issues in future. Anyway, I am sending you the same set right now. Thanks a ton in advance for what you've sent me.

Cheers!

VC

OOOOOPS MPP - Whats yr email id?

Mr VC I also need them can you mail them to me also  MY Id is

                               Kartik.chawla8@gmail.com


Thankyou


Regards


Kartik

Hi to all,

The plans sent by VC to me are uploaded here

http://rapidshare.com/files/378041461/fwdepronbalsagliders.zip.html

You can just download it....

I think this wont cause any problem to anyone....

Thanks Sriharishine! Speedracer/ Kartik, just 'VC' from now on my friend. ;D

Thanks VC & Sri Hari.


Good Collection




Sanjay

Hi VC
On the onset let me thank you for taking the effort in sending the plans ... F5 / F22 / SU37 truly appreciated. Did not respond earlier as i work MON to FRI and week days are hectic...apologies for the same. Typically SAT and SUN is Fyying and R&D day.

Though i have made some designs with straw(hard ones) and meat trays these plans are fantastic. Thanks once again

If you could help me with EPS / Depron sheet manufacturers i can have an UNLIMITED supphy.

Aeromodelling my friend,

If you search through this wonderful forum, you will find a lot of posts regarding Depron, EPP, Elapor, Styrofoam, Thermocol dealers and suppliers. The best part is that Mumbai seems to be the treasure trove for depron suppliers! Search the forum and you will find out.

All the best.

VC

thanks for posting the rapid-share link sriharishine n VC for plans  :)

Sure do that VC thanks ....

VC , Buddy i am still trying to understand this site.... not too net savvy
Kindly help with depron sullpiers in mumbai / also what about flute board(PP) can the same be used in the glider plans you sent? just thinking out of the box!

Hi VC,
can u please send the plan to me also at email@onlinesandeep.com

Hi Sandeep!

Pl check your mail.

Cheers! :salute:

VC

Thanks got it

Hi VC
"Koi cheez agar tahe dil se chaho to sari kayanaat usse tumhe milane me jut jati hai"
So true
Unlimited supply of Depron discovered - Imported 8-10 mm sheets available ....
Looks like i will finally start the plans you mailed to me ....
Thanks again Buddy.

Also i have found out a substitute for flute board - honeycomb kind of a design :)

Will post some pictures of the Gnome with Depron Wings that i have recently completed ...
:)Hence away from the forum

Vijayraj
9324544317

Bravo! {:)} {:)} {:)}

All the very best my friend.

Regards,

VC

Rapidshare - This limit is reached.

Could someone email to me fwdepronbalsagliders.zip
user009(at)gmail.com

Tnx

+1 i deen plans too. Could someone mail them to me whenever possible.

rajathv8@gmail.com

Thanks in advance :)

Send me your email id, I will send you some plans.

Add in ur list engineerbalu@gmail.com

Ok Guys, sending in a few moments!

Plans sent but very poor net connection. All the best guys. Post pictures after you build them.

got them.
Thanks :)

Please send to me also...
dileepbalan@gmail.com

Regards,
Dileep

Dileep, pl check your mail. Plans sent.

Thanks VC
I received the plans.

Regards,
Dileep

Thank u VC.!

I have fwd'd the mail dileepbalan :)

Hi VC,
I would be very grateful if you could email the plans to me as well: nige52@gmail.com
I have only just taken an interest in these small gliders and would love to experiment.
Many thanks
Nige

Hi Nige,

Welcome to the forum. Will be mailing you in a while from now.

Regards,

VC

Thank you VC,
I have them and very soon will be building one, or two, or three  ;D
Cheers
Nige

hi guys can u send me d plans..i am a beginner for this ...it ll b very much helpful if u send this to me....
.my mail id is


path_prasanna@yahoo.com

Hi VC plz send me the plans as the rapid link is not working.   my id is mr.manojrs@rediffmail.com

Thanks.