RC India
Welcome Guest, please login or register.
 
Pages: 1 [2]  All   Go Down
0 Members and 1 Guest are viewing this topic. Topic Tools Topic Tools 
Read
« Reply #25 on: January 26, 2014, 08:31:35 PM »
anandtr2006
Plane Lover
Active Member
**

Reputation Power: 1 
anandtr2006 has no influence.
Offline Offline

City: PATHANAMTHITTA
State: Kerala
RC Skills: Beginner
Posts: 27
Join Date: Dec, 2013



Rhino 1550mah 2S 7.4v 25C-37C Lipo ..If i choose this.. should i go for an ESC with 40A capacity ?
Logged
 

Read
« Reply #26 on: January 26, 2014, 09:35:51 PM »
utkarshg13
Plane Lover
Forum Hero

*****

Reputation Power: 11 
utkarshg13 has no influence.
Offline Offline

City: Bangalore
State: Karnataka
RC Skills: Intermediate
Posts: 973
Join Date: Jul, 2013



Yeah you could use this battery but discharge rate is a bit high. BTW which motor you are using? Also, burst rate of your battery is around 30C so you should not go for 40A ESC. Also, 40A ESC for an ornithopter is over powered... You should go for 20A ESC...
Please do tell which motor you are using. Also, what is the AUW of your model.
Logged

"If you were born with wings, do every thing you could, for flying."
 

Read
« Reply #27 on: January 26, 2014, 09:51:46 PM »
anandtr2006
Plane Lover
Active Member
**

Reputation Power: 1 
anandtr2006 has no influence.
Offline Offline

City: PATHANAMTHITTA
State: Kerala
RC Skills: Beginner
Posts: 27
Join Date: Dec, 2013



http://thehobbyshop.in/index.php?main_page=product_info&cPath=31&products_id=106 this is the motor i plan to use. 30 A ESC will do ? what determines the capacity of the ESC ? any help . really thanks for replying. Cheesy
Logged
 

Read
« Reply #28 on: January 26, 2014, 09:59:58 PM »
utkarshg13
Plane Lover
Forum Hero

*****

Reputation Power: 11 
utkarshg13 has no influence.
Offline Offline

City: Bangalore
State: Karnataka
RC Skills: Intermediate
Posts: 973
Join Date: Jul, 2013



The recommended ESC for this motor is 25A. Then you should go for this one. Also, the burst current of the battery, motor operating current etc, together decide the ESC to be chosen. You should go for this:
http://www.rcindia.org/wiki/What_are_the_basics_of_electrical_power_setups_for_RC_planes
Logged

"If you were born with wings, do every thing you could, for flying."
 

Read
« Reply #29 on: January 26, 2014, 10:07:57 PM »
anandtr2006
Plane Lover
Active Member
**

Reputation Power: 1 
anandtr2006 has no influence.
Offline Offline

City: PATHANAMTHITTA
State: Kerala
RC Skills: Beginner
Posts: 27
Join Date: Dec, 2013



thanks utkarsh bhai. so battery 2cell 1300mah 15-25C Lipo battery ( http://thehobbyshop.in/index.php?main_page=product_info&cPath=28_29&products_id=68) and motor 3200kv Brushless Outrunner Motor(  http://thehobbyshop.in/index.php?main_page=product_info&cPath=31&products_id=106) along with ESC 25Amps Brushless ESC( http://thehobbyshop.in/index.php?main_page=product_info&cPath=34_35&products_id=113). this should make the perfect combo ? ihad gone through the post on electrical power systems. it was very useful, though i couldnt get any idea on ESC.
Logged
 

Read
« Reply #30 on: January 26, 2014, 10:15:00 PM »
utkarshg13
Plane Lover
Forum Hero

*****

Reputation Power: 11 
utkarshg13 has no influence.
Offline Offline

City: Bangalore
State: Karnataka
RC Skills: Intermediate
Posts: 973
Join Date: Jul, 2013



Yeah it seems to be good one. just asking, why everything from hobbysea only?
Also, ESC is chosen a liitle more than the max. current motor could draw...
Logged

"If you were born with wings, do every thing you could, for flying."
 

Read
« Reply #31 on: February 14, 2014, 11:02:12 PM »
anandtr2006
Plane Lover
Active Member
**

Reputation Power: 1 
anandtr2006 has no influence.
Offline Offline

City: PATHANAMTHITTA
State: Kerala
RC Skills: Beginner
Posts: 27
Join Date: Dec, 2013



No..i used rcbazaar and ebay for getting the products
Logged
 

Read
« Reply #32 on: February 14, 2014, 11:05:59 PM »
anandtr2006
Plane Lover
Active Member
**

Reputation Power: 1 
anandtr2006 has no influence.
Offline Offline

City: PATHANAMTHITTA
State: Kerala
RC Skills: Beginner
Posts: 27
Join Date: Dec, 2013



Hello everyone. I had been working on the ornithopter design for quite some time. Decided to post an image. will upload a video too. thanks everyone  Smiley

1013739_608175295902770_454690478_n.jpg
Re: Ornithopter
* 1013739_608175295902770_454690478_n.jpg (17.7 KB, 800x376 - viewed 763 times.)
Logged
 

Read
« Reply #33 on: February 15, 2014, 09:11:56 AM »
anandtr2006
Plane Lover
Active Member
**

Reputation Power: 1 
anandtr2006 has no influence.
Offline Offline

City: PATHANAMTHITTA
State: Kerala
RC Skills: Beginner
Posts: 27
Join Date: Dec, 2013



A doubt. My ESC is http://www.hobbyking.com/hobbyking/store/__25365__turnigy_multistar_30_amp_multi_rotor_brushless_esc_2_4s.html which has a constant current discharge of 30 A. My battery is http://www.ebay.in/itm/Turnigy-2200mAh-2S-20C-Lipo-Pack-with-XT60-Connector-/191012282294?pt=IN_Toys_Games_School_Stuff&hash=item2c79381fb6&_uhb=1#ht_2059wt_1188 , which is a 2s lipo battery of 2.2Ah rating and 20C cosntant current reating. Now please correct me if i am wrong :

the battery has a peak discharge of 30C. But its constant current rating is 20C which means 2.2Ah x 20C = 44 A current can be discharged constantly. So the power input would be 7.4 V x 44 A = 325.6 W. Now, the ESC has a rating of 30A. So the max current that can pass throught the ESC is 30 A, isnt it ? so it wont let anything above 30A to pass through it, which means i can never get 44 A out of the battery ? so if the motor load increases, and the battery gives out of a current higher than 30A the ESC will burn ? Am i wrong to get into this conclusion ? Please help. Huh? Huh? Huh?
Logged
 

Read
« Reply #34 on: February 15, 2014, 09:47:13 AM »
rcrcnitesh
Plane Lover
Forum Hero

*****

Reputation Power: 22 
rcrcnitesh barely matters.rcrcnitesh barely matters.
Offline Offline

City: Chennai
State: Tamil Nadu
RC Skills: Beginner
Posts: 2152
Join Date: Jul, 2013



You are right but most esc comes with burst rating which can be obtained for 10 secs
Logged

Maker | Aeromodeller | Teenager
 

Read
« Reply #35 on: February 15, 2014, 09:57:49 AM »
anandtr2006
Plane Lover
Active Member
**

Reputation Power: 1 
anandtr2006 has no influence.
Offline Offline

City: PATHANAMTHITTA
State: Kerala
RC Skills: Beginner
Posts: 27
Join Date: Dec, 2013



So if the motor load increases, the ESC will burn ? or will it simply restrict the current to 30A for ten secs and then come down to the normal rate ? or just simply discharge ? do i need to keep a higher reating rating. preferrably a 50 A ESC for the 44 A that is tp be discharged from the battery ?
Logged
 

Read
« Reply #36 on: February 15, 2014, 10:02:05 AM »
rcrcnitesh
Plane Lover
Forum Hero

*****

Reputation Power: 22 
rcrcnitesh barely matters.rcrcnitesh barely matters.
Offline Offline

City: Chennai
State: Tamil Nadu
RC Skills: Beginner
Posts: 2152
Join Date: Jul, 2013



How much current does your mptor take in load.
10Sec thing is for eg i have an 30a esc it can handle 40a upto ten sec without any problem.
Logged

Maker | Aeromodeller | Teenager
 

Read
« Reply #37 on: February 15, 2014, 10:05:58 AM »
anandtr2006
Plane Lover
Active Member
**

Reputation Power: 1 
anandtr2006 has no influence.
Offline Offline

City: PATHANAMTHITTA
State: Kerala
RC Skills: Beginner
Posts: 27
Join Date: Dec, 2013



http://www.rcbazaar.com/products/1910-avionic-c2826-kv1900-brushless-motor.aspx this is the motor i plan to use. i am still in the fabrication stage, and havent procured the rx tx unit yet. so i am not sure as to how much current my motor would take when in load. its kv rating is 1900. can i figure out the current it would take if i were to put in a 2s battery 7.4v across it ?
Logged
 

Read
« Reply #38 on: February 15, 2014, 10:10:29 AM »
rcrcnitesh
Plane Lover
Forum Hero

*****

Reputation Power: 22 
rcrcnitesh barely matters.rcrcnitesh barely matters.
Offline Offline

City: Chennai
State: Tamil Nadu
RC Skills: Beginner
Posts: 2152
Join Date: Jul, 2013



Your setup is perfect just reduce the battery to a smaller one
Logged

Maker | Aeromodeller | Teenager
 

Read
« Reply #39 on: February 15, 2014, 10:16:31 AM »
anandtr2006
Plane Lover
Active Member
**

Reputation Power: 1 
anandtr2006 has no influence.
Offline Offline

City: PATHANAMTHITTA
State: Kerala
RC Skills: Beginner
Posts: 27
Join Date: Dec, 2013



oh.. reducing the battery to 1s lipo of 3.7 v ? but that would mean reduction in speed ? considering i follow the current 2s lipo, would it damage the setup ? it wont work ?
Logged
 

Read
« Reply #40 on: February 15, 2014, 10:18:42 AM »
rcrcnitesh
Plane Lover
Forum Hero

*****

Reputation Power: 22 
rcrcnitesh barely matters.rcrcnitesh barely matters.
Offline Offline

City: Chennai
State: Tamil Nadu
RC Skills: Beginner
Posts: 2152
Join Date: Jul, 2013



Not 1s us 2s but use a lesser mah lipo than 2200mah something like a 1000 to 1500 mah 2s lipo
Logged

Maker | Aeromodeller | Teenager
 

Read
« Reply #41 on: February 15, 2014, 11:30:49 AM »
anandtr2006
Plane Lover
Active Member
**

Reputation Power: 1 
anandtr2006 has no influence.
Offline Offline

City: PATHANAMTHITTA
State: Kerala
RC Skills: Beginner
Posts: 27
Join Date: Dec, 2013



ohh okkk got it  Smiley thanks a lot. great work
Logged
 

Read
« Reply #42 on: February 15, 2014, 11:42:04 AM »
anandtr2006
Plane Lover
Active Member
**

Reputation Power: 1 
anandtr2006 has no influence.
Offline Offline

City: PATHANAMTHITTA
State: Kerala
RC Skills: Beginner
Posts: 27
Join Date: Dec, 2013



but if i were to go with the current battery,up until i buy a lesser Ah battery, will it burn the entire setup ?
Logged
 

Read
« Reply #43 on: February 15, 2014, 11:50:03 AM »
rcrcnitesh
Plane Lover
Forum Hero

*****

Reputation Power: 22 
rcrcnitesh barely matters.rcrcnitesh barely matters.
Offline Offline

City: Chennai
State: Tamil Nadu
RC Skills: Beginner
Posts: 2152
Join Date: Jul, 2013



No not at all but it will be a lot heavier
Logged

Maker | Aeromodeller | Teenager
 

Read
« Reply #44 on: February 20, 2014, 06:44:12 AM »
anandtr2006
Plane Lover
Active Member
**

Reputation Power: 1 
anandtr2006 has no influence.
Offline Offline

City: PATHANAMTHITTA
State: Kerala
RC Skills: Beginner
Posts: 27
Join Date: Dec, 2013



Hello Everyone !!  Grin narrowing on down to the rx tx unit. However I am really puzzled. I have come across this http://www.hobbyking.com/hobbyking/store/__7527__corona_synthesized_dual_conv_receiver_6ch_72mhz.html as my potential receiver unit with a corresponding tx unit. However seeing the pins of the receiver, i am really in a dilemma whether these would fit into the female plugs of ESC http://www.hobbyking.com/hobbyking/store/__25365__turnigy_multistar_30_amp_multi_rotor_brushless_esc_2_4s.html and the servos : http://www.rcbazaar.com/products/799-avionic-metal-gear-9g-servo-av9amg-analog.aspx . can anyone tell me  ? The pins look a bit more thicker and from my knowledge they wont fit into the plugs of ESC and rx, Is there a specification to judge this ? Am i wrong ? please help
Logged
 

Read
« Reply #45 on: March 08, 2014, 06:30:22 PM »
anandtr2006
Plane Lover
Active Member
**

Reputation Power: 1 
anandtr2006 has no influence.
Offline Offline

City: PATHANAMTHITTA
State: Kerala
RC Skills: Beginner
Posts: 27
Join Date: Dec, 2013



can anyone help me with ball linkages ? i need to get them for my project and i havent found them in the leading RC websites. i am not sure of the specs, please help
Logged
 

Read
« Reply #46 on: March 08, 2014, 07:30:43 PM »
anwar
Administrator
Forum Hero

*****

Reputation Power: 141 
anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!
Offline Offline

City: Doha (Qatar) & Thrissur
State: Kerala
RC Skills: Advanced
Posts: 11619
Join Date: Mar, 2009

RC India - Flying and racing with open minds !



If I understand the need correctly, any store carrying RC heli spares (in stock, of course) should have these.
Logged

Hangar : Please see my introduction.
RC India forum and me : About this forum.
 

Read
« Reply #47 on: September 05, 2016, 11:51:37 AM »
Shreej Deosarkar
Plane Lover
Active Member
**

Reputation Power: 1 
Shreej Deosarkar has no influence.
Offline Offline

City: pune
State: Maharashtra
RC Skills: Beginner
Posts: 1
Join Date: Sep, 2016



Hello everyone
I'm a student of engineering from pune.i'm fabricating an ornithopter but i'm quite unknown about the calculations need do be done to make it fly, controller unit And from where do i get the gears manufactured. Help me guys to sort ot this issues.
If anybody can explain me brief here's my email id
deosarkarshreej@gmail.com
Logged
 

Read
« Reply #48 on: March 06, 2018, 02:47:47 PM »
ash
Plane Lover
Forum Veteran

****

Reputation Power: 4 
ash has no influence.
Offline Offline

City: Hyderabad
State: Andhra Pradesh
RC Skills: Advanced
Posts: 254
Join Date: Jun, 2012



Logged

learning is a constant process of discovery -a process with out End !
 

Pages: 1 [2]  All   Go Up
Jump to:  

Related Topics
Subject Started by Replies Views Last post
Ornithopter
Kites, Trains, Free Flight and All Others
aforadi 3 4417 Last post September 19, 2009, 12:13:31 PM
by PankajC
Need Help for Ornithopter
Electric Planes
orni123 2 2972 Last post December 28, 2018, 09:50:43 PM
by ORNIKIT
RC Ornithopter
Kites, Trains, Free Flight and All Others
joydeep 15 12195 Last post August 07, 2012, 08:52:00 PM
by joydeep
ornithopter
Self-designed, DIY and College Projects
michi 17 6126 Last post May 07, 2012, 10:20:39 AM
by PiyushI
how to make ornithopter
Self-designed, DIY and College Projects
ash 12 3450 Last post December 31, 2017, 06:41:18 PM
by ash