Hello All,
the Lister-Blackstone RM3 loco is back.
An upgraded version done completely using a brass photo-etched body work kit and Chassis.
Model is for 32mm gauge & has 1 motor driving rear axle, through brass worm reduction drive, the front axle is driven using a belt drive using brass pulleys.
In built PWM speed controller, adjusted by turning the inside cab brake wheel.
Direction controls using a 3 way dpdt switch on the dash board.
Directional LED headlamp.
Cast aluminum buffer beams and cast/machined brass buffer/couplers.
Regards
Nilanjan paul