Hello , I designed a "Cheap balsa chuck glider"  out of a balsa stick and some 1.5mm balsa

Here is small flight video:



The glider was just glued together and flown. NO SANDING, FINISHING OR TRIMMIMG was done on it.

Weight is 5.0 gms . The first flight went well, and would have been better had I taken a bit more care during assembly and sanded stuff properly

It's wingspan is 36cm.
Designed to be extremely simple to assemble, and fly. Rubber band was used as a nose weight to balance it.

I would like some chuck glider experts to comment on its characteristics  

P.S.: I do plan to make kits for the same if many people are interested in it(approx Rs.110)

Pics attached


Regards
Yashodhan

good design