RC India
Welcome Guest, please login or register.
 
Pages: [1] 2  All   Go Down
0 Members and 1 Guest are viewing this topic. Topic Tools Topic Tools 
Read
« on: April 12, 2014, 12:22:36 PM »
Chopper Boys
Plane Lover
Active Member

**

Reputation Power: 1 
Chopper Boys has no influence.
Offline Offline

City: Panaji
State: Goa
RC Skills: Intermediate
Posts: 16
Join Date: Apr, 2014




Hi everyone! Starting the build thread on one of my dream projects, very excited Grin
So, me(Prateek) and my friend have started aerial photography for people in Goa, till now we have worked for Sunburn Music festival, Percept Picture company and Universal Music India by just shooting from our tricopter! So we decided to make it better and give it a new life and this time I made sure that everything was perfect for the build.
The plans are a in-house design and we got it cut out of 1.5mm carbon fiber sheets from Satya Gupta(www.Quadkopters.com). He helped us a lot through this phase and I congratulate him for being one of the very few people who can provide such an exceptional service! Bow and I recommend you to build your own multirotor or anything else by designing it yourself and getting it cut! It has been an awesome journey from the first rough plans to seeing it in the air. We would also like to thank David Wendestal from RcExplorer.se to make an awesome tricopter on which we had based our designs.

You can visit us @  www.fb.com/TheChopperBoys and www.chopperboys.in
All the electronics were used from the last build of the tricopter @ FPV Tricopter Build!(rcexplorer.se frame)

Some features of the new frame:
1. Hollow carbon fiber rods allow concealing of the wires from ESC to the centre.
2. Integrated motor mounts, no need of the + shaped mounts which come with the motors, hence the motors are directly bolted to the booms.
3. Integrated camera mount with soft rubber ball dampeners + camera holder with velcro strap for Gopr Hero 3+.
4. Concealed wiring inside the centre frame.
5. Hole on upper frame for passage of ESC wires.
6. Minimum wastage of area.

Lets start with the build now:

All the parts cut out of carbon fiber from www.QuadKopters.com
https://lh5.googleusercontent.com/-AIhIM4z_cYk/U0hJb54F4xI/AAAAAAAAAdg/o3yIcqK2-ZA/s800/IMG_7773-1.jpg
Carbon Fiber Custom FPV AP Tricopter Build- Self Design (5th Sweepstakes)


1. Measure out the size on the carbon rods, for the booms and cut them accordingly, 40cm for the front booms and 42cm for the back one.https://lh4.googleusercontent.com/-4Zlk6o_vyOY/U0hJPFYLRPI/AAAAAAAAAdI/pM-DNS1tyBk/s800/IMG_7756-1.jpg
Carbon Fiber Custom FPV AP Tricopter Build- Self Design (5th Sweepstakes)


2. Drill holes for the bolts to pass through in the frame.https://lh4.googleusercontent.com/-UiSzSRWOyMw/U0hJOgp9wxI/AAAAAAAAAdE/GgrYS5-FZWw/s800/IMG_7754-1.jpg
Carbon Fiber Custom FPV AP Tricopter Build- Self Design (5th Sweepstakes)


3.The back boom is being channeled on the sides to fit snugly with the bolts holding it down.
https://lh3.googleusercontent.com/-ZdpiMLKH1xQ/U0hJcdgtwdI/AAAAAAAAAdo/6Iw0XcpHV4w/s800/IMG_7775-1.jpg0
Carbon Fiber Custom FPV AP Tricopter Build- Self Design (5th Sweepstakes)


https://lh5.googleusercontent.com/-bv_WP-RdZ-w/U0hJgRe_1QI/AAAAAAAAAdw/JD-whl_CzuE/s800/IMG_7777-1.jpg
Carbon Fiber Custom FPV AP Tricopter Build- Self Design (5th Sweepstakes)


4. Place bolts on the upper frame plate to fit the booms(for a dry fit)
https://lh4.googleusercontent.com/-oKieiA4ZpC4/U0hJlzCcp9I/AAAAAAAAAd8/S6vK4LnzoDw/s800/IMG_7780-1.jpg
Carbon Fiber Custom FPV AP Tricopter Build- Self Design (5th Sweepstakes)


5. Insert the arms int to bolts and place them properly.
https://lh4.googleusercontent.com/-ep9bUohb3vk/U0hJmtips6I/AAAAAAAAAeA/C1o5dv756ec/s800/IMG_7781-1.jpg
Carbon Fiber Custom FPV AP Tricopter Build- Self Design (5th Sweepstakes)


https://lh4.googleusercontent.com/-bCeNYLTV3ow/U0hJorgFvjI/AAAAAAAAAeI/eG6Jff8TEqI/s800/IMG_7782-1.jpg
Carbon Fiber Custom FPV AP Tricopter Build- Self Design (5th Sweepstakes)
« Last Edit: April 12, 2014, 10:09:15 PM by Chopper Boys » Logged

Working towards professional aerial photography.
Visit us @ www.ChopperBoys.in and www.facebook.com/TheChopperBoys
Aerial Photography and Videography
 

Read
« Reply #1 on: April 12, 2014, 12:38:16 PM »
SideWinder
Plane Lover
Forum Hero
*****

Reputation Power: 7 
SideWinder has no influence.
Offline Offline

City: Chandrapur
State: Maharashtra
RC Skills: Beginner
Posts: 600
Join Date: Jan, 2012



 Head Scratching you forgot something if this is an entry for sweepstakes....

Quote
2.  This has to be a new build, as documented by newspapers placed near the starting off material for the build. Please post multiple pictures allowing us to clearly authenticate the date claims (at least couple of pics with the items and newspaper, with the newspaper placed at multiple locations amongst the parts, and one with the date information on the news paper clearly shown).  We will consider partial builds at very early stages, on a case by case basis (so that this sweepstakes act as a catalyst for people to finish those builds).
Logged
 

Read
« Reply #2 on: April 12, 2014, 12:40:07 PM »
Chopper Boys
Plane Lover
Active Member

**

Reputation Power: 1 
Chopper Boys has no influence.
Offline Offline

City: Panaji
State: Goa
RC Skills: Intermediate
Posts: 16
Join Date: Apr, 2014



The pic with the newspaper is coming next.
Logged

Working towards professional aerial photography.
Visit us @ www.ChopperBoys.in and www.facebook.com/TheChopperBoys
Aerial Photography and Videography
 

Read
« Reply #3 on: April 12, 2014, 12:41:35 PM »
Chopper Boys
Plane Lover
Active Member

**

Reputation Power: 1 
Chopper Boys has no influence.
Offline Offline

City: Panaji
State: Goa
RC Skills: Intermediate
Posts: 16
Join Date: Apr, 2014



6. Insert front spacer into the bolts and tighten it.
https://lh3.googleusercontent.com/-zKhI-nsEt40/U0hJxlFss5I/AAAAAAAAAeU/xOOm62ZLMio/s800/IMG_7784-1.jpg
Carbon Fiber Custom FPV AP Tricopter Build- Self Design (5th Sweepstakes)


7. We measured the distance from one hole to the one diagonally opposite one and designed mounts to hold the motor by screwing the bolts directly into them(same as rcexplorer.se).
https://lh6.googleusercontent.com/-SPbvDL_K2-0/U0hJyGy1d4I/AAAAAAAAAec/EEFQq4mRO2s/s800/IMG_7785-1.jpg
Carbon Fiber Custom FPV AP Tricopter Build- Self Design (5th Sweepstakes)


https://lh4.googleusercontent.com/-4zdSse42hFY/U0hJ1cvyjtI/AAAAAAAAAeo/yD3nypzKkc8/s800/IMG_7786-1.jpg
Carbon Fiber Custom FPV AP Tricopter Build- Self Design (5th Sweepstakes)


Note: only the two front shafts will get these motor mounts as the back motor is on a yawing axis.For the following steps we will need to remove the shafts from the frame.

8. The two front shafts are drilled to fit the screws snugly.
https://lh4.googleusercontent.com/-qUtOSuWUf7c/U0hJ9bgalII/AAAAAAAAAe0/wCGBU2AqI0E/s800/IMG_7787-1.jpg
Carbon Fiber Custom FPV AP Tricopter Build- Self Design (5th Sweepstakes)


9. Align the motor mount to the shaft to be ready to place the motor. Note :  we recommend to use some threadlock for the motors.
https://lh5.googleusercontent.com/-qfxON2DchN8/U0hJ-odiCBI/AAAAAAAAAfA/xVSDZFMInp8/s800/IMG_7793-1.jpg
Carbon Fiber Custom FPV AP Tricopter Build- Self Design (5th Sweepstakes)


https://lh5.googleusercontent.com/-3YNyAQpOtqY/U0hKCCDQEbI/AAAAAAAAAfI/jtEmM0Tdyi0/s800/IMG_7794-1.jpg
Carbon Fiber Custom FPV AP Tricopter Build- Self Design (5th Sweepstakes)


10.Insert the top motor mount plate and position the motor into place.
https://lh3.googleusercontent.com/-GtcxTvB1KOs/U0hKKEAy6EI/AAAAAAAAAfY/oiuianUAOvc/s800/IMG_7796-1.jpg
Carbon Fiber Custom FPV AP Tricopter Build- Self Design (5th Sweepstakes)


https://lh3.googleusercontent.com/-IsWWQRV-OCk/U0hKNtdU_uI/AAAAAAAAAfg/6ro1d-cebFE/s800/IMG_7797-1.jpg
Carbon Fiber Custom FPV AP Tricopter Build- Self Design (5th Sweepstakes)


https://lh3.googleusercontent.com/-Sqj7WyMlwMY/U0hKPnXI0dI/AAAAAAAAAfo/HIZCp4UTBW0/s800/IMG_7802-1.jpg
Carbon Fiber Custom FPV AP Tricopter Build- Self Design (5th Sweepstakes)


11. Tighten all the bolts to the motor( the bolts we had were to long so we had to add extra nuts to space it out)
https://lh3.googleusercontent.com/-7pXS0cWU9sk/U0hKSCh2VMI/AAAAAAAAAfw/r-4nkxrNJ6s/s800/IMG_7805-1.jpg
Carbon Fiber Custom FPV AP Tricopter Build- Self Design (5th Sweepstakes)


https://lh5.googleusercontent.com/-fs8VCZZQghM/U0hKXP9gNSI/AAAAAAAAAf8/C81pt07Eopc/s800/IMG_7807-1.jpg
Carbon Fiber Custom FPV AP Tricopter Build- Self Design (5th Sweepstakes)


Repeat the above steps for another arm.
https://lh4.googleusercontent.com/-UaU8sc5l63g/U0hKXqrZnwI/AAAAAAAAAgA/IRhKxwCtI9I/s800/IMG_7808-1.jpg
Carbon Fiber Custom FPV AP Tricopter Build- Self Design (5th Sweepstakes)


https://lh6.googleusercontent.com/-Axr07T2OpFE/U0hKaCXdhlI/AAAAAAAAAgI/eM_zHiCC0GE/s1024/IMG_7810-1.jpg
Carbon Fiber Custom FPV AP Tricopter Build- Self Design (5th Sweepstakes)
Logged

Working towards professional aerial photography.
Visit us @ www.ChopperBoys.in and www.facebook.com/TheChopperBoys
Aerial Photography and Videography
 

Read
« Reply #4 on: April 12, 2014, 12:59:27 PM »
Chopper Boys
Plane Lover
Active Member

**

Reputation Power: 1 
Chopper Boys has no influence.
Offline Offline

City: Panaji
State: Goa
RC Skills: Intermediate
Posts: 16
Join Date: Apr, 2014



12. Checking dry fit for all the booms again :  Attach the landing legs using cable/zip ties
https://lh4.googleusercontent.com/-qv6lmytUSQw/U0hKhUNmdyI/AAAAAAAAAgY/5RFrU8ll3sQ/s800/IMG_7812-1.jpg
Carbon Fiber Custom FPV AP Tricopter Build- Self Design (5th Sweepstakes)


https://lh6.googleusercontent.com/-_yLcqZ7CNn0/U0hKnxPKyCI/AAAAAAAAAgo/u04Oa_FEJ88/s1024/IMG_7818-1.jpg
Carbon Fiber Custom FPV AP Tricopter Build- Self Design (5th Sweepstakes)


Now for the back boom :
13. Placing the motor mount bolt the motor into place using the bolts supplied with it.
https://lh6.googleusercontent.com/-naRg4J2Z1pU/U0hKf65iWsI/AAAAAAAAAgQ/_UxRtaH9vwo/s800/IMG_7813-1.jpg
Carbon Fiber Custom FPV AP Tricopter Build- Self Design (5th Sweepstakes)


14. The motor will be attached to the yaw mechanism (Similar to rcexplorer.se)
https://lh3.googleusercontent.com/-L_CVew8nSKE/U0hKkjQEsUI/AAAAAAAAAgg/Re83egIhoGA/s800/IMG_7816-1.jpg
Carbon Fiber Custom FPV AP Tricopter Build- Self Design (5th Sweepstakes)

(I don't have the build process of the mechanism covered here. For more info on that please visit rcexplorer.se)

15. Starting work on some electronics: Soldering extension cables to the ESCs going through the boom.
Cut open the covering to expose the terminals of the ESC.
https://lh5.googleusercontent.com/-jb6eIuge_EA/U0hKq_j9TvI/AAAAAAAAAgw/IUqUQhbW6Jo/s800/IMG_7821-1.jpg
Carbon Fiber Custom FPV AP Tricopter Build- Self Design (5th Sweepstakes)


https://lh6.googleusercontent.com/-S0jFJENjBoc/U0hKuqk_IAI/AAAAAAAAAg4/MnrlS6jr1K4/s800/IMG_7823-1.jpg
Carbon Fiber Custom FPV AP Tricopter Build- Self Design (5th Sweepstakes)


16. Now pass the wires through the arms to connect to the ESCs.
https://lh3.googleusercontent.com/-e7Ee0OikdAA/U0hKw7CjiDI/AAAAAAAAAhA/QwR7GgeLNRo/s800/IMG_7824-1.jpg
Carbon Fiber Custom FPV AP Tricopter Build- Self Design (5th Sweepstakes)


https://lh3.googleusercontent.com/-TTFh3TsqUf8/U0hK2JkKmfI/AAAAAAAAAhI/F-NuijDp7dQ/s800/IMG_7825-1.jpg
Carbon Fiber Custom FPV AP Tricopter Build- Self Design (5th Sweepstakes)


First solder and the cover the connection with some heat shrink for both the power and signal cables.
https://lh6.googleusercontent.com/-lXc_CC8FDEc/U0hLHF2Z68I/AAAAAAAAAh4/kOHNRjr3aWw/s800/IMG_7836-1.jpg
Carbon Fiber Custom FPV AP Tricopter Build- Self Design (5th Sweepstakes)


https://lh3.googleusercontent.com/-hU_Dck95jXI/U0hK4d9lSUI/AAAAAAAAAhQ/K2WhJ8TjeUQ/s800/IMG_7826-1.jpg
Carbon Fiber Custom FPV AP Tricopter Build- Self Design (5th Sweepstakes)


https://lh6.googleusercontent.com/-ZZlNWd--JqM/U0hK7SIYX0I/AAAAAAAAAhY/iAjCBMojOrM/s800/IMG_7828-1.jpg
Carbon Fiber Custom FPV AP Tricopter Build- Self Design (5th Sweepstakes)


Position the wires and then attach the ESC to the boom using cable/zip ties.
https://lh3.googleusercontent.com/-YyTtWgR7P0A/U0hK-xKLYwI/AAAAAAAAAhg/APn2PgYoXc0/s800/IMG_7829-1.jpg
Carbon Fiber Custom FPV AP Tricopter Build- Self Design (5th Sweepstakes)


https://lh4.googleusercontent.com/-kflTKniAnTg/U0hLApVh8vI/AAAAAAAAAho/VOPq22oQnzI/s800/IMG_7830-1.jpg
Carbon Fiber Custom FPV AP Tricopter Build- Self Design (5th Sweepstakes)


https://lh5.googleusercontent.com/-cLx6EjmfO98/U0hLFcMDVJI/AAAAAAAAAhw/qvPiZuMTKm4/s800/IMG_7833-1.jpg
Carbon Fiber Custom FPV AP Tricopter Build- Self Design (5th Sweepstakes)


Repeat for second arm and your front arms are complete.
https://lh4.googleusercontent.com/-NNxkTUqD_PA/U0hLOv7FbSI/AAAAAAAAAiI/aI-Gn_88mng/s800/IMG_7840-1.jpg
Carbon Fiber Custom FPV AP Tricopter Build- Self Design (5th Sweepstakes)


https://lh5.googleusercontent.com/-4WplWZa_suY/U0hLKoeaVmI/AAAAAAAAAiA/lcJiDM1Ks9M/s800/IMG_7837-1.jpg
Carbon Fiber Custom FPV AP Tricopter Build- Self Design (5th Sweepstakes)
Logged

Working towards professional aerial photography.
Visit us @ www.ChopperBoys.in and www.facebook.com/TheChopperBoys
Aerial Photography and Videography
 

Read
« Reply #5 on: April 12, 2014, 01:15:58 PM »
Chopper Boys
Plane Lover
Active Member

**

Reputation Power: 1 
Chopper Boys has no influence.
Offline Offline

City: Panaji
State: Goa
RC Skills: Intermediate
Posts: 16
Join Date: Apr, 2014



All comments and suggestions are welcome.
Logged

Working towards professional aerial photography.
Visit us @ www.ChopperBoys.in and www.facebook.com/TheChopperBoys
Aerial Photography and Videography
 

Read
« Reply #6 on: April 12, 2014, 02:37:34 PM »
rcrcnitesh
Plane Lover
Forum Hero

*****

Reputation Power: 22 
rcrcnitesh barely matters.rcrcnitesh barely matters.
Offline Offline

City: Chennai
State: Tamil Nadu
RC Skills: Beginner
Posts: 2154
Join Date: Jul, 2013



Awesome guys.
I want to see you someday.
Beautiful
Logged

Maker | Aeromodeller | Teenager
 

Read
« Reply #7 on: April 12, 2014, 03:02:56 PM »
Chopper Boys
Plane Lover
Active Member

**

Reputation Power: 1 
Chopper Boys has no influence.
Offline Offline

City: Panaji
State: Goa
RC Skills: Intermediate
Posts: 16
Join Date: Apr, 2014



@Nitesh- Sure! Drop us a message if you come to Goa, we'll meet up
Logged

Working towards professional aerial photography.
Visit us @ www.ChopperBoys.in and www.facebook.com/TheChopperBoys
Aerial Photography and Videography
 

Read
« Reply #8 on: April 12, 2014, 03:53:10 PM »
manojswizera
Plane Lover
Forum Hero

*****

Reputation Power: 18 
manojswizera has no influence.
Offline Offline

City: AURANGABAD
State: Maharashtra
RC Skills: Beginner
Posts: 1336
Join Date: Oct, 2011



Beautiful and in Detailed build log.  Thumbs Up
Logged

Russ-40 Trainer, Mr.moss, Pushler, Skysurfer, Mugi , F-22, Red swan, Xtra-300, redfury, flying mantaray.
 

Read
« Reply #9 on: April 12, 2014, 05:24:30 PM »
Chopper Boys
Plane Lover
Active Member

**

Reputation Power: 1 
Chopper Boys has no influence.
Offline Offline

City: Panaji
State: Goa
RC Skills: Intermediate
Posts: 16
Join Date: Apr, 2014



Thanks @manojswizera. It was my dream to build my own designed cf tricopter.... so had to cover it properly
Logged

Working towards professional aerial photography.
Visit us @ www.ChopperBoys.in and www.facebook.com/TheChopperBoys
Aerial Photography and Videography
 

Read
« Reply #10 on: April 12, 2014, 08:25:59 PM »
satyagupta
Heli Lover
Forum Hero

*****

Reputation Power: 29 
satyagupta barely matters.satyagupta barely matters.
Offline Offline

City: Navi Mumbai
State: Maharashtra
RC Skills: Beginner
Posts: 2565
Join Date: Mar, 2012



Thank you so much for the mention Prateek  Hats Off Hats Off Hats Off Clap Clap
Logged

 

Read
« Reply #11 on: April 12, 2014, 09:40:37 PM »
prateek13
FPV Mission Man
Plane Lover
Forum Hero

*****

Reputation Power: 14 
prateek13 has no influence.
Offline Offline

City: Dona Paula, Panaji
State: Goa
RC Skills: Intermediate
Posts: 1099
Join Date: May, 2010



@Satya- most welcome! Thanks to you for a great quality of product
Logged

Award | OFNA Nexx8 | Art-Tech Edge 540T | Glidiator V2 | Hawker Tempest | Cessna Citation Jet
Turnigy 9X
FPV Platforms : CF Tricopter| HK EPP FPV | Bixler 1 | Bixler 2 | DJI Phantom 2 +H3 3D
 

Read
« Reply #12 on: April 13, 2014, 11:01:33 AM »
prateek13
FPV Mission Man
Plane Lover
Forum Hero

*****

Reputation Power: 14 
prateek13 has no influence.
Offline Offline

City: Dona Paula, Panaji
State: Goa
RC Skills: Intermediate
Posts: 1099
Join Date: May, 2010



Tested the camera holder, no vibrations!
Logged

Award | OFNA Nexx8 | Art-Tech Edge 540T | Glidiator V2 | Hawker Tempest | Cessna Citation Jet
Turnigy 9X
FPV Platforms : CF Tricopter| HK EPP FPV | Bixler 1 | Bixler 2 | DJI Phantom 2 +H3 3D
 

Read
« Reply #13 on: April 13, 2014, 11:30:55 AM »
docnayeem
Plane Lover
Forum Hero
*****

Reputation Power: 1 
docnayeem has no influence.
Offline Offline

City: Kolhapur
State: Maharashtra
RC Skills: Intermediate
Posts: 603
Join Date: Nov, 2013


Re:

Thumps up
Logged
 

Read
« Reply #14 on: April 13, 2014, 12:17:18 PM »
Chopper Boys
Plane Lover
Active Member

**

Reputation Power: 1 
Chopper Boys has no influence.
Offline Offline

City: Panaji
State: Goa
RC Skills: Intermediate
Posts: 16
Join Date: Apr, 2014



Thanks @docnayeem
Logged

Working towards professional aerial photography.
Visit us @ www.ChopperBoys.in and www.facebook.com/TheChopperBoys
Aerial Photography and Videography
 

Read
« Reply #15 on: April 13, 2014, 02:19:33 PM »
satyagupta
Heli Lover
Forum Hero

*****

Reputation Power: 29 
satyagupta barely matters.satyagupta barely matters.
Offline Offline

City: Navi Mumbai
State: Maharashtra
RC Skills: Beginner
Posts: 2565
Join Date: Mar, 2012



Tested the camera holder, no vibrations!

You should have thought of using bobbin screw. They too give 0 vibration
Logged

 

Read
« Reply #16 on: April 13, 2014, 03:17:14 PM »
Chopper Boys
Plane Lover
Active Member

**

Reputation Power: 1 
Chopper Boys has no influence.
Offline Offline

City: Panaji
State: Goa
RC Skills: Intermediate
Posts: 16
Join Date: Apr, 2014



I did not have bobbin screws.... had 4 of the ball dampeners do designed the holder for them
Logged

Working towards professional aerial photography.
Visit us @ www.ChopperBoys.in and www.facebook.com/TheChopperBoys
Aerial Photography and Videography
 

Read
« Reply #17 on: April 13, 2014, 05:50:49 PM »
Dharmik
Heli Lover
Forum Hero

*****

Reputation Power: 13 
Dharmik has no influence.
Offline Offline

City: Bharuch
State: Gujarat
RC Skills: Beginner
Posts: 1097
Join Date: Sep, 2011



Very nice build. keep it up. I saw your videos, they are fantastic.
Logged
 

Read
« Reply #18 on: April 13, 2014, 07:09:32 PM »
ved
psychic flyer!!
Plane Lover
Forum Hero
*****

Reputation Power: 8 
ved has no influence.
Offline Offline

City: Marcel
State: Goa
RC Skills: Beginner
Posts: 605
Join Date: Sep, 2010



Good going Prateek.
Logged

Turnigy 9x w. Er9x | Custom Hovercraft |Scratch Build Boat | Tricopter | Skysurfer V3|
 

Read
« Reply #19 on: April 13, 2014, 08:37:02 PM »
Chopper Boys
Plane Lover
Active Member

**

Reputation Power: 1 
Chopper Boys has no influence.
Offline Offline

City: Panaji
State: Goa
RC Skills: Intermediate
Posts: 16
Join Date: Apr, 2014



@Dharmik and ved- Thanks!
Logged

Working towards professional aerial photography.
Visit us @ www.ChopperBoys.in and www.facebook.com/TheChopperBoys
Aerial Photography and Videography
 

Read
« Reply #20 on: April 13, 2014, 08:39:41 PM »
ved
psychic flyer!!
Plane Lover
Forum Hero
*****

Reputation Power: 8 
ved has no influence.
Offline Offline

City: Marcel
State: Goa
RC Skills: Beginner
Posts: 605
Join Date: Sep, 2010



I hope maiden will be soon.
Logged

Turnigy 9x w. Er9x | Custom Hovercraft |Scratch Build Boat | Tricopter | Skysurfer V3|
 

Read
« Reply #21 on: April 13, 2014, 08:56:33 PM »
Chopper Boys
Plane Lover
Active Member

**

Reputation Power: 1 
Chopper Boys has no influence.
Offline Offline

City: Panaji
State: Goa
RC Skills: Intermediate
Posts: 16
Join Date: Apr, 2014



Maiden done already...
Logged

Working towards professional aerial photography.
Visit us @ www.ChopperBoys.in and www.facebook.com/TheChopperBoys
Aerial Photography and Videography
 

Read
« Reply #22 on: April 13, 2014, 08:57:44 PM »
ved
psychic flyer!!
Plane Lover
Forum Hero
*****

Reputation Power: 8 
ved has no influence.
Offline Offline

City: Marcel
State: Goa
RC Skills: Beginner
Posts: 605
Join Date: Sep, 2010



Oh. Post some videos.
Logged

Turnigy 9x w. Er9x | Custom Hovercraft |Scratch Build Boat | Tricopter | Skysurfer V3|
 

Read
« Reply #23 on: April 13, 2014, 11:14:48 PM »
Chopper Boys
Plane Lover
Active Member

**

Reputation Power: 1 
Chopper Boys has no influence.
Offline Offline

City: Panaji
State: Goa
RC Skills: Intermediate
Posts: 16
Join Date: Apr, 2014



Will do that soon... some awesome stuff coming soon
Some pics : All taken by the tricopters

https://imagizer.imageshack.us/v2/940x529q50/191/s7i7.jpg
Carbon Fiber Custom FPV AP Tricopter Build- Self Design (5th Sweepstakes)


https://imagizer.imageshack.us/v2/940x529q90/822/sjit.jpg
Carbon Fiber Custom FPV AP Tricopter Build- Self Design (5th Sweepstakes)


https://imagizer.imageshack.us/v2/940x529q90/811/npki.jpg
Carbon Fiber Custom FPV AP Tricopter Build- Self Design (5th Sweepstakes)


https://imagizer.imageshack.us/v2/940x529q90/850/75bm.jpg
Carbon Fiber Custom FPV AP Tricopter Build- Self Design (5th Sweepstakes)
Logged

Working towards professional aerial photography.
Visit us @ www.ChopperBoys.in and www.facebook.com/TheChopperBoys
Aerial Photography and Videography
 

Read
« Reply #24 on: April 14, 2014, 12:40:24 AM »
utkarshg13
Plane Lover
Forum Hero

*****

Reputation Power: 11 
utkarshg13 has no influence.
Offline Offline

City: Bangalore
State: Karnataka
RC Skills: Intermediate
Posts: 982
Join Date: Jul, 2013



Very nice pics Clap Clap Clap
Blue water, beautiful beach... must have enjoyed the view during flying.
 Hats Off
Logged

"If you were born with wings, do every thing you could, for flying."
 

Pages: [1] 2  All   Go Up
Jump to:  

Related Topics
Subject Started by Replies Views Last post
scratch build small tricopter for 2014 sweepstakes
Multirotors
jayantpradhan 11 4618 Last post November 01, 2014, 04:33:26 PM
by Abhijith
680 carbon fiber hexcopter build « 1 2  All »
Multirotors
yashd95 32 11288 Last post December 13, 2014, 02:40:42 PM
by SK1701
RCI 6th Sweepstakes: Tricopter build
Multirotors
satyagupta 14 8533 Last post July 11, 2015, 02:57:24 PM
by saikat
Custom Carbon Fiber Products
For Sale
vishu14 6 3215 Last post August 23, 2016, 03:35:11 PM
by harshu11
Custom carbon fiber /glass fiber parts
For Sale
vishu14 0 1665 Last post July 20, 2016, 07:38:59 PM
by vishu14