RC India
Welcome Guest, please login or register.
 
Pages: [1]   Go Down
0 Members and 1 Guest are viewing this topic. Topic Tools Topic Tools 
Read
« on: January 29, 2023, 05:35:47 PM »
SuryaKK
Plane Lover
Active Member
**

Reputation Power: 1 
SuryaKK has no influence.
Offline Offline

City: Bangalore
State: Karnataka
RC Skills: Beginner
Posts: 39
Join Date: Jul, 2020

Student. Mechanical engineering. RC hobbyist.




Greetings everyone!  Salute

After a week of experimenting with the 3D printed F450 quadcopter driven by the KK 2.1.5 flight controller, I decided to move on to a more exciting form factor of quads.
The outcome is a fully 3D printed 350mm racing quad frame that draws its inspirations from the DJI MINI 2. The drone is fully enclosed giving it a more aesthetic and commercial product - like ergonomics.  Wink

REVEAL VIDEO: https://www.youtube.com/shorts/43EobqrdkEo


Specifications:

SIZE:

Without propeller guards - 278*278*46 mm (l*b*h)
With propeller guards 76.2 (Supports up to 10" props) - 527*525*76 mm (l*b*h)

TYPE: Racing + FPV

CONFIGURATION: X QUAD (350mm diagonal distance)

MAXIMUM BATTERY SIZE: 75*35*30 mm (l*b*h) or up to 1550 mAh 3S LiPo

MOTOR MOUNT: A2212 13T or equivalent

MAXIMUM PROPELLER SIZE: 9.4 inches

MAXIMUM ADVISED TAKE OFF WEIGHT: 1000 grams

FRAME WEIGHT: 200 grams

I am currently running 1000 KV BLDC outrunners with 9.4*4.3 inch props, powered by a 3S 1000 mAh 40-80C LiPo.
Oh, and, I decided to move on from the KK board to something more advanced and modern, so, I'm using the HOLYBRO MICRO APM as the brains of this little drone.
Extremely delighted with the way it performs now and looking forward to slap on some 2200 KV motors with 6 inch tri-blade props to test out the frame's true potential!  Grin

After putting it through rigorous indoor testing (> 50 mins of air time) I can conclude that the APM board does a very good job at stabilizing the craft but the only problem I'm facing is that the quad tends to shoot up above 50% throttle and quickly drop when I pull the throttle down to around 40% in stabilize mode. I have tried playing around with the vertical acceleration and climb rates on mission planner but nothing seems to help this. The Barometer seems to be working perfectly alright though.

Any help regarding this hurdle would be much appreciated. Anyhow, the STL files for the frame will be soon made public after some more modifications so stay tuned for that!  Giggle

BrandingRHS.jpg
3D printed 350mm racing quad
* BrandingRHS.jpg (73.88 KB, 800x800 - viewed 460 times.)
This post has 3 more images(s)/attachment(s). Please login or register to view them.
Logged
 

Pages: [1]   Go Up
Jump to:  

Related Topics
Subject Started by Replies Views Last post
FPV quad racing is the new sport
RC General Topics
anwar 22 17496 Last post October 30, 2015, 04:39:48 PM
by Chris B - MultiGP
Racing quad frame
Wanted
Habib arshad 0 929 Last post October 02, 2016, 09:26:44 PM
by Habib arshad
3d printed quad frame
Multirotors
Phoenix! 2 2916 Last post May 27, 2017, 09:42:42 PM
by Voice of deaf
3d printed racing quad
Multirotors
ramarao 2 1469 Last post July 20, 2020, 10:23:11 AM
by ramarao
sale sale 3d printed RC PLANES and RACING QUADS.....
For Sale
3dprinting 5 1541 Last post January 05, 2021, 08:02:28 PM
by 3dprinting