RC India

Dear folks here , Hermit 145 V2 quadcopter is newly released micro FPV quadcopter by DroneTrex, the prominent features compared with V1 is its FPV integrated FC, no need many cables for connecting FC between OSD, VTX and receiver, everything has been integrated inside the board which makes the assemble more simple and easier.
 Here are the details for the quadcopter:
 Hermit 145 V2 is a newly designed micro FPV quadcopter of only 158mm (Diagonal from motor center to motor center), its small size can make it fly in a relatively confined space easily. It is installed a 5.8G/300mw analog video transmitter (VTX) supporting 40 channels, an analog camera(120°), a flight control board supporting CleanFlight and BaseFlight firmware), a buzzer, three onboard full color LED tail lights, a compatible receiver (three options), a DCDC power, a integrated control board with OSD etc. In addition, its camera is orientation adjustable.
 Note: Please make a choice on the receiver for your FC when you place the order!
 Features:
 1） Weight: 84.0g (not including battery)
 2） Flight weight: 112.0g (450mAh/25C/7.4V); 128g (850mAh/25C/7.4V)
 3） Flight time：9 minutes (450mAh/25C/7.4V); 12 minutes(850mAh/25C/7.4V)
 4） Working voltage: 7V~8.4V (2S)
 5） Diagonal from motor center to motor center: 158mm
 6） Propeller diameter:90mm
 7） ESC: MU-3A-L1(max working votage:8.4V)
 8） STM32F103CBU6 main control/72MHz
 9） Support an outside compass, sonar and GPS
 10） Camera angle adjustable:+/- 25°
 11） It uses brushless micro motors of high efficiency ( 5.6g, 4000KV)
 12） There are 3 options for the integrated receivers：compatible DSMX/DSM2 receiver; compatible FUTABA SFHSS receiver, compatible FlySky AFHDS receiver (we are developing other compatible receivers at the moment)
 Other features:
 1) The battery can be changed and mounted by only one hand
 2) Binding operation can be done by one hand too.
 Functions for hardware
 1） The integrated analog 5.8G/300mw video transmitter supports up to 40 channels (frequencies)
 2） Supports ONESHORT125 high speed ESC mode
 3） Supports changing ESC parameters or upgrading ESC firmware through flight control board
 4） Supports setting up OSD parameters and upgrading OSD firmware;
 5） Customer can add or change many kinds of compatible receiver according to their request.

The other change on Hermit V2 is its molded clear plastic cover on each ARM ESC, it protects arm ESCs effectively and looks much nicer too. You can also see it gets side black boards on the frame,the electronic parts are enclosed, no exposure anymore like before.

cost? Any link?

 Customers who are interested in the product, please check details from this link:
http://www.dronetrex.com/hermit-145-v2-micro-brushless-fpv-quadcopter-p-616.html

Thank you for your kind reply :hatsoff:

It is cool here.I would like to give one hot-selling Flight Control board here.
Features as follows:
Supports both Cleanflight and Baseflight firmware;
Onboard buzzer and three full color LED tail lights;
The 5.8G analog video transmitter applied a clock generator of 10PPM accuracy (most clock generators on market are of 30PPM accuracy)
The 5.8G analog video transmitter supports FAT SHARK goggles;
The video transmitter port is IPX;
Independent receiver (supports DSMX/DSM2/SBUS) signal processor;
Supports GPS ( only when the receiver signal is through the independent receiver signal processor)
STM32F103CBT6 main control/72MHz;
Onboard sensors: MPU6050, HMC5983(optional), MSR5611(optional);
Supports outside compass and sonar;
Onboard receiver (optional);
Option for digital video transmitter port ( at the same position for onboard receiver, so customer can only choose one between the two);
Working voltage: 7.4~18V (equals 2~4S lipoly, for 6S use, customer needs to place an order specially)
It is option for  one DSMX/DSM2 or SFHSS or FS or FRSKY compatible receiver

 :)photos here Thanks for your attention :salute:
website:http://www.dronetrex.com/sciskymula-integrated-fpv-flight-control-board-with-frsky-rx-p-682.html

 :bow:Coming back!
We have one item in good quality.it will help your quadcopters a lot I believe.
http://www.dronetrex.com/mr20a-brushless-speed-controller-p-620.html   :hatsoff:

We are looking for an India Agent who is familiar with local market to make money together.We have designing and manufacturing capacity to support you for your customers.If any interests on that,please email me at dronetrex@outlook.com and find most products information on our website: www.dronetrex.com.Any inquiry and proposal are appreciated.Thank you all!

kindly contact Satya Gupta from quadkopters....he could be interested in promoting this product in india.....provided you take care of customs.... :giggle:

Have already contacted Susan. The pricing is bit higher side and considering the current situation DGCA and all i am not very much interested in, investing in this product until the matter is settled.

The fc on reply#7 is available at BG for $75 and your price is $143.
http://www.banggood.com/Scisky-Mul-A-Integrated-FPV-Flight-Controller-Supports-Cleanflight-Baseflight-p-1035451.html
What is the difference ?

A lot thanks.I think I knew him.

Dear,it was our old product.Banggood sells it for us.Our new one is with receiver,old one without receiver.I can send one photo for detail for you a minute later.

Scisky-Mul-A integrated FPV flight control board with FRSKY RX

As a hobbyist I will not spend an additional 70$ just on pre fabricated receiver. I would rather buy receiver separately which weighs 3-4g for 25-30$ or so which will have flexibility to connect to other FC also.
I am sorry if I am too frank. But this is the fact.

So these receivers are bit different they are very very light weight and they fit into the flight controller easily. You dont have to do much of the wiring or connections at all.

Got it.

correct

Thank you for your frankness.The way you montioned is good and I will follow you.

Whats the range of the fpv tx ?

500 meters