Dear folks here , Hermit 145 V2 quadcopter is newly released micro FPV quadcopter by DroneTrex, the prominent features compared with V1 is its FPV integrated FC, no need many cables for connecting FC between OSD, VTX and receiver, everything has been integrated inside the board which makes the assemble more simple and easier.
Here are the details for the quadcopter:
Hermit 145 V2 is a newly designed micro FPV quadcopter of only 158mm (Diagonal from motor center to motor center), its small size can make it fly in a relatively confined space easily. It is installed a 5.8G/300mw analog video transmitter (VTX) supporting 40 channels, an analog camera(120°), a flight control board supporting CleanFlight and BaseFlight firmware), a buzzer, three onboard full color LED tail lights, a compatible receiver (three options), a DCDC power, a integrated control board with OSD etc. In addition, its camera is orientation adjustable.
Note: Please make a choice on the receiver for your FC when you place the order!
Features:
1) Weight: 84.0g (not including battery)
2) Flight weight: 112.0g (450mAh/25C/7.4V); 128g (850mAh/25C/7.4V)
3) Flight time:9 minutes (450mAh/25C/7.4V); 12 minutes(850mAh/25C/7.4V)
4) Working voltage: 7V~8.4V (2S)
5) Diagonal from motor center to motor center: 158mm
6) Propeller diameter:90mm
7) ESC: MU-3A-L1(max working votage:8.4V)
8) STM32F103CBU6 main control/72MHz
9) Support an outside compass, sonar and GPS
10) Camera angle adjustable:+/- 25°
11) It uses brushless micro motors of high efficiency ( 5.6g, 4000KV)
12) There are 3 options for the integrated receivers:compatible DSMX/DSM2 receiver; compatible FUTABA SFHSS receiver, compatible FlySky AFHDS receiver (we are developing other compatible receivers at the moment)
Other features:
1) The battery can be changed and mounted by only one hand
2) Binding operation can be done by one hand too.
Functions for hardware
1) The integrated analog 5.8G/300mw video transmitter supports up to 40 channels (frequencies)
2) Supports ONESHORT125 high speed ESC mode
3) Supports changing ESC parameters or upgrading ESC firmware through flight control board
4) Supports setting up OSD parameters and upgrading OSD firmware;
5) Customer can add or change many kinds of compatible receiver according to their request.