RC India
Welcome Guest, please login or register.
 
Pages: 1 2 3 [All]   Go Down
0 Members and 1 Guest are viewing this topic. Topic Tools Topic Tools 
Read
« on: December 26, 2014, 10:14:12 PM »
cyberhack
Heli Lover
Forum Hero
*****

Reputation Power: 8 
cyberhack has no influence.
Offline Offline

City: MUMBAI
State: Maharashtra
RC Skills: Beginner
Posts: 637
Join Date: Aug, 2014




Hey everyone recently took a apm and as there is a new version of firmware 3.2 quadx tried that with my 450 quad bt it juss doesn't takes off and flips have done all calibration and checked all setting on tx rx evrythng normal except it flips to the right or sometyms left anyone had the same prb???
Logged
 

Read
« Reply #1 on: December 26, 2014, 10:30:51 PM »
gunnu
Heli Lover
Forum Hero

*****

Reputation Power: 14 
gunnu has no influence.
Offline Offline

City: dasuya
State: Punjab
RC Skills: Advanced
Posts: 1104
Join Date: Jul, 2014



hello. check motor rotation. 

Logged
 

Read
« Reply #2 on: December 27, 2014, 12:00:06 AM »
cyberhack
Heli Lover
Forum Hero
*****

Reputation Power: 8 
cyberhack has no influence.
Offline Offline

City: MUMBAI
State: Maharashtra
RC Skills: Beginner
Posts: 637
Join Date: Aug, 2014



yes motor rotation is correct and props too are right i tired on 2 apms buyed from 2 different places they bth flip
Logged
 

Read
« Reply #3 on: December 27, 2014, 12:01:32 AM »
gunnu
Heli Lover
Forum Hero

*****

Reputation Power: 14 
gunnu has no influence.
Offline Offline

City: dasuya
State: Punjab
RC Skills: Advanced
Posts: 1104
Join Date: Jul, 2014



than setup your radio again and correctly...
Logged
 

Read
« Reply #4 on: December 27, 2014, 12:03:27 AM »
cyberhack
Heli Lover
Forum Hero
*****

Reputation Power: 8 
cyberhack has no influence.
Offline Offline

City: MUMBAI
State: Maharashtra
RC Skills: Beginner
Posts: 637
Join Date: Aug, 2014



also tried on 2 radios flysky and avionics Tongue doesnt help also checked there are no mixes nthng idk wats the issue its juss too much powerfull seems so
config:
1000kv motors
30amp esc
f450 frame
3s lipo 2200mah

the same flies on kk2.1 perfectly bt flips on apm
Logged
 

Read
« Reply #5 on: December 27, 2014, 12:04:35 AM »
gunnu
Heli Lover
Forum Hero

*****

Reputation Power: 14 
gunnu has no influence.
Offline Offline

City: dasuya
State: Punjab
RC Skills: Advanced
Posts: 1104
Join Date: Jul, 2014



is your is update to latest firmware..?
Logged
 

Read
« Reply #6 on: December 27, 2014, 12:07:50 AM »
cyberhack
Heli Lover
Forum Hero
*****

Reputation Power: 8 
cyberhack has no influence.
Offline Offline

City: MUMBAI
State: Maharashtra
RC Skills: Beginner
Posts: 637
Join Date: Aug, 2014



yes i feel thats the prb wat and which firmware r u using?
Logged
 

Read
« Reply #7 on: December 27, 2014, 12:08:52 AM »
gunnu
Heli Lover
Forum Hero

*****

Reputation Power: 14 
gunnu has no influence.
Offline Offline

City: dasuya
State: Punjab
RC Skills: Advanced
Posts: 1104
Join Date: Jul, 2014



no i using naza...
Logged
 

Read
« Reply #8 on: December 27, 2014, 12:11:01 AM »
gunnu
Heli Lover
Forum Hero

*****

Reputation Power: 14 
gunnu has no influence.
Offline Offline

City: dasuya
State: Punjab
RC Skills: Advanced
Posts: 1104
Join Date: Jul, 2014



which apm are you using? genuine 3DR or clone..?
Logged
 

Read
« Reply #9 on: December 27, 2014, 12:11:54 AM »
cyberhack
Heli Lover
Forum Hero
*****

Reputation Power: 8 
cyberhack has no influence.
Offline Offline

City: MUMBAI
State: Maharashtra
RC Skills: Beginner
Posts: 637
Join Date: Aug, 2014



2.6 clone bth are clone
Logged
 

Read
« Reply #10 on: December 27, 2014, 12:12:38 AM »
gunnu
Heli Lover
Forum Hero

*****

Reputation Power: 14 
gunnu has no influence.
Offline Offline

City: dasuya
State: Punjab
RC Skills: Advanced
Posts: 1104
Join Date: Jul, 2014



from where u bought??
Logged
 

Read
« Reply #11 on: December 27, 2014, 12:14:09 AM »
cyberhack
Heli Lover
Forum Hero
*****

Reputation Power: 8 
cyberhack has no influence.
Offline Offline

City: MUMBAI
State: Maharashtra
RC Skills: Beginner
Posts: 637
Join Date: Aug, 2014



bth from different places one from lhs and one from banggood
Logged
 

Read
« Reply #12 on: December 27, 2014, 12:14:46 AM »
cyberhack
Heli Lover
Forum Hero
*****

Reputation Power: 8 
cyberhack has no influence.
Offline Offline

City: MUMBAI
State: Maharashtra
RC Skills: Beginner
Posts: 637
Join Date: Aug, 2014



lhs apm 2.6 was wrking before perfectly bt after update it flips
Logged
 

Read
« Reply #13 on: December 27, 2014, 12:19:06 AM »
gunnu
Heli Lover
Forum Hero

*****

Reputation Power: 14 
gunnu has no influence.
Offline Offline

City: dasuya
State: Punjab
RC Skills: Advanced
Posts: 1104
Join Date: Jul, 2014



i was also planing to buy apm 2.6 clone but watching reviews on youtube about chines cloned apm.. i prefer to buy naza...
Logged
 

Read
« Reply #14 on: December 27, 2014, 08:53:19 AM »
SideWinder
Plane Lover
Forum Hero
*****

Reputation Power: 7 
SideWinder has no influence.
Offline Offline

City: Chandrapur
State: Maharashtra
RC Skills: Beginner
Posts: 600
Join Date: Jan, 2012



I have a pixhawk and apm and both clones work fine on 3.2fw .
Since you are having issues with all the APM fc's after update, you must probably be overlooking something.

Have you redone acc/mag calibration after update, other than that check for loose joints in wiring. And if you are switching Tx'es, its highly recommended to calibrate the esc's and radio calibration too. Also recheck prop orientation and motor rotation & connections to FC.

Anyways please put a photo of your setup.
Logged
 

Read
« Reply #15 on: December 27, 2014, 10:01:27 AM »
akhilzid
Heli Lover
Forum Hero

*****

Reputation Power: 5 
akhilzid has no influence.
Offline Offline

City: Ernakulam
State: Kerala
RC Skills: Advanced
Posts: 541
Join Date: Sep, 2014


Re:

Try reset all parameters and recalibrate everything.
Logged
 

Read
« Reply #16 on: December 27, 2014, 10:48:57 AM »
Immanuel
Plane Lover
Active Member
**

Reputation Power: 2 
Immanuel has no influence.
Offline Offline

City: Chennai
State: Tamil Nadu
RC Skills: Beginner
Posts: 98
Join Date: Sep, 2014



I have apm2.6(clone) , with version 3.2 quadx ,it works just fun...., like akhilzid said try resetting parameters ND recalibrate everything , do a motor test ,in this version of ardupilot the pitch axis is reversed(i.e. forward is back, ND back is forward ) ,so reverse that channel in ur radio , if everything doesn't work ur compass is probably bad (compass offsets should be between -150to150),or try loading an older version of ardu copter.upload a picture of ur setup..

Logged
 

Read
« Reply #17 on: December 27, 2014, 11:37:07 AM »
radiocraft
Car Lover
Senior Member
***

Reputation Power: 1 
radiocraft has no influence.
Offline Offline

City: Mumbai
State: Maharashtra
RC Skills: Advanced
Posts: 159
Join Date: Aug, 2014



Today even I updated the firmware and everything's working fine.
But I'm loosing height on alt hold Sad
Logged
 

Read
« Reply #18 on: December 27, 2014, 12:05:10 PM »
cyberhack
Heli Lover
Forum Hero
*****

Reputation Power: 8 
cyberhack has no influence.
Offline Offline

City: MUMBAI
State: Maharashtra
RC Skills: Beginner
Posts: 637
Join Date: Aug, 2014



@immanuel i am nt using compass and 2.6 dont have a compass its disabled right? do i need a compass to fly with apm???
Logged
 

Read
« Reply #19 on: December 27, 2014, 12:33:18 PM »
SideWinder
Plane Lover
Forum Hero
*****

Reputation Power: 7 
SideWinder has no influence.
Offline Offline

City: Chandrapur
State: Maharashtra
RC Skills: Beginner
Posts: 600
Join Date: Jan, 2012



The original 3dr APM 2.6 doesnt have compass onboard but the clones do with open/closed solderpads. So you would need to check your FC if the compass is there and connected.

I would like to point out that connecting motors is different in APM than in kk, if thats what you are coming from.You can check the motors rotation direction by doing a motor test from mission planner( without props on).

Anyways flips happen if :
accelerometer/gyro are uncalibrated,(gyros wont be calibrated properly if you are moving the copter while booting up)
uncalibrated radio,
wrong prop configuration,
wrong motor rotation direction ,
connected the esc incorrectly to APM,
powering issues,
loose connections.
too much vibration
Or finally bad pilot, unflyable wind conditions and bad tuning.

These are some links where you can find accurate details:

http://copter.ardupilot.com/wiki/common-installing-3dr-ublox-gps-compass-module/#Connecting_to_APM_25_APM_20
http://copter.ardupilot.com/wiki/motor-setup/
http://copter.ardupilot.com/wiki/connecting-the-escs-and-motors/

Compass is not necessary but I would suggest you to get a compass/gps module, because you would be missing various flight modes without them. And without them, APM is only as good as kk2 with alt hold being an exception and autotune.
Logged
 

Read
« Reply #20 on: December 27, 2014, 12:37:48 PM »
cyberhack
Heli Lover
Forum Hero
*****

Reputation Power: 8 
cyberhack has no influence.
Offline Offline

City: MUMBAI
State: Maharashtra
RC Skills: Beginner
Posts: 637
Join Date: Aug, 2014



@sidewinder thank u i have done all the above steps i have checked it with two apms and two different tx rx Tongue now only a possiblity left is my apm is powered by escs and all escs have all wires connected i have heard that only the motor 1 esc should have power and rest shouldnt have ? is it ? that may cause a flip?
Logged
 

Read
« Reply #21 on: December 27, 2014, 12:45:32 PM »
Immanuel
Plane Lover
Active Member
**

Reputation Power: 2 
Immanuel has no influence.
Offline Offline

City: Chennai
State: Tamil Nadu
RC Skills: Beginner
Posts: 98
Join Date: Sep, 2014



 if ur using the latest version of apm , it'll not allow u to arm it if something is wrong with ur calibrations ,( is ur mission planner giving any error messages ?)on board  , I bought my apm 2.6 from quadkopters.com , check the description of the apm from the site u bought it , if u don't have a compass just buy one with a GPS module like sidewinder said (www.quadkopters.com/product/flight-controllers/ublox-6m-gps-with-cover/) ,
Logged
 

Read
« Reply #22 on: December 27, 2014, 12:46:34 PM »
Immanuel
Plane Lover
Active Member
**

Reputation Power: 2 
Immanuel has no influence.
Offline Offline

City: Chennai
State: Tamil Nadu
RC Skills: Beginner
Posts: 98
Join Date: Sep, 2014



No if ur escs are linear type they all can have power
Logged
 

Read
« Reply #23 on: December 27, 2014, 12:53:16 PM »
Hareesh
Heli Lover
Active Member
**

Reputation Power: 1 
Hareesh has no influence.
Offline Offline

City: Bangalore
State: Karnataka
RC Skills: Beginner
Posts: 23
Join Date: Mar, 2014


Re:

My friend also had the problem with the latest update.. GPS reports malfunction. I guess the latest update operates at much higher frequency to give better response time. Please check the aurdupilot forums. It talks about some blown out voltage regulator
Logged
 

Read
« Reply #24 on: December 27, 2014, 12:58:06 PM »
Hareesh
Heli Lover
Active Member
**

Reputation Power: 1 
Hareesh has no influence.
Offline Offline

City: Bangalore
State: Karnataka
RC Skills: Beginner
Posts: 23
Join Date: Mar, 2014


Re:

He has now returned to the old firmware.. Everything works like a charm now. For his tricopter. GPS now doesnot report any malfunction. The latest update seems to be buggy.. Would suggest to stay on the older firmware for some more time.. Until a stable one comes
Logged
 

Read
« Reply #25 on: December 27, 2014, 01:00:08 PM »
SideWinder
Plane Lover
Forum Hero
*****

Reputation Power: 7 
SideWinder has no influence.
Offline Offline

City: Chandrapur
State: Maharashtra
RC Skills: Beginner
Posts: 600
Join Date: Jan, 2012



If you say you have checked it all & everything is correct(that was fast  Shocked ), then most probably your boards are toast  Tongue
I can only tell you what can be the cause, troubleshooting it properly is your chore.

Esc's are very dirty power source for APM. You should either use power module or a separate bec/ubec for powering APM. Sometimes voltage may drop to less than 4.5v on esc's under high load which may lead to a brownout and crash.
Check that regulator too as Hareesh said, completely forgot that!
Logged
 

Read
« Reply #26 on: December 27, 2014, 01:31:15 PM »
cyberhack
Heli Lover
Forum Hero
*****

Reputation Power: 8 
cyberhack has no influence.
Offline Offline

City: MUMBAI
State: Maharashtra
RC Skills: Beginner
Posts: 637
Join Date: Aug, 2014



yes i felt the same i thought the 3dr people would have done some settings which would not allow clones to be flied Tongue juss a thought Tongue
Logged
 

Read
« Reply #27 on: December 27, 2014, 02:37:49 PM »
radiocraft
Car Lover
Senior Member
***

Reputation Power: 1 
radiocraft has no influence.
Offline Offline

City: Mumbai
State: Maharashtra
RC Skills: Advanced
Posts: 159
Join Date: Aug, 2014



How to revert back on old firmware ??
Logged
 

Read
« Reply #28 on: December 27, 2014, 03:00:38 PM »
SideWinder
Plane Lover
Forum Hero
*****

Reputation Power: 7 
SideWinder has no influence.
Offline Offline

City: Chandrapur
State: Maharashtra
RC Skills: Beginner
Posts: 600
Join Date: Jan, 2012



How to revert back on old firmware ??
Go to
Mission Planner--Initial setup--Install firmware--Pick Previous Firmware (on the right side at the bottom)--Then either select from the drop down menu or click on appropriate image for your configuration.
Logged
 

Read
« Reply #29 on: December 27, 2014, 03:29:26 PM »
cyberhack
Heli Lover
Forum Hero
*****

Reputation Power: 8 
cyberhack has no influence.
Offline Offline

City: MUMBAI
State: Maharashtra
RC Skills: Beginner
Posts: 637
Join Date: Aug, 2014



okie will try with a old firmware thank u all
Logged
 

Read
« Reply #30 on: December 27, 2014, 07:38:18 PM »
cyberhack
Heli Lover
Forum Hero
*****

Reputation Power: 8 
cyberhack has no influence.
Offline Offline

City: MUMBAI
State: Maharashtra
RC Skills: Beginner
Posts: 637
Join Date: Aug, 2014



hey watch my quad on apm 2.6 with latest firmware it flips right on throttle more than 50% well i have calibrated all stuff and its perfect to fly in order of setup sequence...
Logged
 

Read
« Reply #31 on: December 27, 2014, 08:47:01 PM »
SK1701
Heli Lover
Forum Hero

*****

Reputation Power: 11 
SK1701 has no influence.
Offline Offline

City: Montreal/ Bangalore
State: OUTSIDE INDIA
RC Skills: Intermediate
Posts: 888
Join Date: Oct, 2014

set acc_hardware = 1



The video is private.
Logged

 

Read
« Reply #32 on: December 27, 2014, 09:43:12 PM »
cyberhack
Heli Lover
Forum Hero
*****

Reputation Power: 8 
cyberhack has no influence.
Offline Offline

City: MUMBAI
State: Maharashtra
RC Skills: Beginner
Posts: 637
Join Date: Aug, 2014



sry i didnt see that made it public have a look
Logged
 

Read
« Reply #33 on: December 27, 2014, 09:55:59 PM »
radiocraft
Car Lover
Senior Member
***

Reputation Power: 1 
radiocraft has no influence.
Offline Offline

City: Mumbai
State: Maharashtra
RC Skills: Advanced
Posts: 159
Join Date: Aug, 2014



Hmm. Which is the best stable version of apm 2.6
Logged
 

Read
« Reply #34 on: December 28, 2014, 08:33:53 AM »
Hareesh
Heli Lover
Active Member
**

Reputation Power: 1 
Hareesh has no influence.
Offline Offline

City: Bangalore
State: Karnataka
RC Skills: Beginner
Posts: 23
Join Date: Mar, 2014


Re:

Hey dude why are you breaking your had so much? Capture the fought days log post it aurdupilot forums and ask them.. See if they works reply. Make due you attach the logs
Logged
 

Read
« Reply #35 on: December 28, 2014, 08:36:10 AM »
Hareesh
Heli Lover
Active Member
**

Reputation Power: 1 
Hareesh has no influence.
Offline Offline

City: Bangalore
State: Karnataka
RC Skills: Beginner
Posts: 23
Join Date: Mar, 2014



Hey dude why are you breaking your had so much? Capture the fought days log post it aurdupilot forums and ask them.. See if they works reply. Make due you attach the logs
Sorry to much off auto correct :p screwed Mr. Try to capture the flight data logs. Post it on aurdupilot website ask the Dev's to analyze then and get back to you with a work around
Logged
 

Read
« Reply #36 on: December 28, 2014, 01:25:44 PM »
cyberhack
Heli Lover
Forum Hero
*****

Reputation Power: 8 
cyberhack has no influence.
Offline Offline

City: MUMBAI
State: Maharashtra
RC Skills: Beginner
Posts: 637
Join Date: Aug, 2014



hey i am unable to download the logs in txt format in mission planner it gets into some encoded format
Logged
 

Read
« Reply #37 on: December 30, 2014, 01:57:08 AM »
cyberhack
Heli Lover
Forum Hero
*****

Reputation Power: 8 
cyberhack has no influence.
Offline Offline

City: MUMBAI
State: Maharashtra
RC Skills: Beginner
Posts: 637
Join Date: Aug, 2014


Re:

Yes I have recorded some logs without props and will post it soon.
Logged
 

Read
« Reply #38 on: January 02, 2015, 12:23:28 AM »
cyberhack
Heli Lover
Forum Hero
*****

Reputation Power: 8 
cyberhack has no influence.
Offline Offline

City: MUMBAI
State: Maharashtra
RC Skills: Beginner
Posts: 637
Join Date: Aug, 2014



hello guys i have made a quadcopter of the below config:
apm2.6
2200mah 3s wolfpack
xxa 1000kv motors
xxa 30amp esc
flysky 6ch tx rx
f450 frame

well i have recently received my apm 2.6 i have updated it to the latest firmware bt it tends to flip right in takeoff above 40% throttle
i dnt have gps or on board compass ...................

(@admin- sry to repost this if i have done it please delete my earlier thread)
Logged
 

Read
« Reply #39 on: January 02, 2015, 12:29:16 AM »
sooraj.palakkad
with eyes in sky
Heli Lover
Forum Hero

*****

Reputation Power: 21 
sooraj.palakkad barely matters.sooraj.palakkad barely matters.
Offline Offline

City: Palakkad
State: Kerala
RC Skills: Expert
Posts: 2058
Join Date: Aug, 2014

SPN



Is motors rotating the right way ?
props are mounted Appropriate directions ?
Logged

RC Hobbyist and an Aerial Cinematographer..
 

Read
« Reply #40 on: January 02, 2015, 12:31:57 AM »
cyberhack
Heli Lover
Forum Hero
*****

Reputation Power: 8 
cyberhack has no influence.
Offline Offline

City: MUMBAI
State: Maharashtra
RC Skills: Beginner
Posts: 637
Join Date: Aug, 2014



yes motor 1 and motor 2 clockwise
motor 3 and motor 4 anticlockwise
and props are also proper according to the rotation
Logged
 

Read
« Reply #41 on: January 02, 2015, 12:43:28 AM »
sooraj.palakkad
with eyes in sky
Heli Lover
Forum Hero

*****

Reputation Power: 21 
sooraj.palakkad barely matters.sooraj.palakkad barely matters.
Offline Offline

City: Palakkad
State: Kerala
RC Skills: Expert
Posts: 2058
Join Date: Aug, 2014

SPN



yes motor 1 and motor 2 clockwise
motor 3 and motor 4 anticlockwise

I don't think that's the right config.

EDIT : I found this image here : http://copter.ardupilot.com/wiki/motor-setup/

http://planner.ardupilot.com/wp-content/uploads/sites/5/2013/12/APM_2_5_MOTORS_QUAD_enc-Copy.jpg
APM 2.6 firmware update
« Last Edit: January 02, 2015, 12:55:32 AM by sooraj.palakkad » Logged

RC Hobbyist and an Aerial Cinematographer..
 

Read
« Reply #42 on: January 02, 2015, 12:51:46 AM »
akhilzid
Heli Lover
Forum Hero

*****

Reputation Power: 5 
akhilzid has no influence.
Offline Offline

City: Ernakulam
State: Kerala
RC Skills: Advanced
Posts: 541
Join Date: Sep, 2014



Look at the config

APM_2_5_MOTORS_QUAD_enc-Copy.jpg
Re: apm 2.6 with 3.2 firmware flips on takeoff
* APM_2_5_MOTORS_QUAD_enc-Copy.jpg (24.85 KB, 716x325 - viewed 394 times.)
Logged
 

Read
« Reply #43 on: January 02, 2015, 12:52:37 AM »
cyberhack
Heli Lover
Forum Hero
*****

Reputation Power: 8 
cyberhack has no influence.
Offline Offline

City: MUMBAI
State: Maharashtra
RC Skills: Beginner
Posts: 637
Join Date: Aug, 2014



ohh yeah sry i have considered the motors wrng side i mean i numbered them wrng yeah the motors are rotation as u said ...........(y)
Logged
 

Read
« Reply #44 on: January 02, 2015, 12:56:34 AM »
cyberhack
Heli Lover
Forum Hero
*****

Reputation Power: 8 
cyberhack has no influence.
Offline Offline

City: MUMBAI
State: Maharashtra
RC Skills: Beginner
Posts: 637
Join Date: Aug, 2014



@akhil i motors rotate the same way posted in the picture bt i suppose i have plugged the esc into apm considering the front left as 1 and front right as 3 and similarly others
i suppose attached them symmetrically would that be a prb? i mean i mistakenly considered motor 3 as motor 1 and connected and tried Tongue lol i figured it out after breaking so many props  Bang Head Thumbs Up will give it a try tomorrow and let u knw shitt i didnt even see it before Sad anyways thankxx both of u wil let u knw abt the result motor rotations are correct bt bec plugging is wrng Tongue  Grin Giggle
Logged
 

Read
« Reply #45 on: January 02, 2015, 12:59:19 AM »
akhilzid
Heli Lover
Forum Hero

*****

Reputation Power: 5 
akhilzid has no influence.
Offline Offline

City: Ernakulam
State: Kerala
RC Skills: Advanced
Posts: 541
Join Date: Sep, 2014



that means you swapped 1 and 3 right?
if yes then that should be the problem.
Logged
 

Read
« Reply #46 on: January 02, 2015, 01:00:52 AM »
cyberhack
Heli Lover
Forum Hero
*****

Reputation Power: 8 
cyberhack has no influence.
Offline Offline

City: MUMBAI
State: Maharashtra
RC Skills: Beginner
Posts: 637
Join Date: Aug, 2014



yup so silly of me was thinking it was some serious issue with the apm Smiley thanxx
Logged
 

Read
« Reply #47 on: January 02, 2015, 01:03:37 AM »
sooraj.palakkad
with eyes in sky
Heli Lover
Forum Hero

*****

Reputation Power: 21 
sooraj.palakkad barely matters.sooraj.palakkad barely matters.
Offline Offline

City: Palakkad
State: Kerala
RC Skills: Expert
Posts: 2058
Join Date: Aug, 2014

SPN



best of luck, and next time setting up a flight controller - refer it's manual first Smiley
Logged

RC Hobbyist and an Aerial Cinematographer..
 

Read
« Reply #48 on: January 02, 2015, 01:04:13 AM »
akhilzid
Heli Lover
Forum Hero

*****

Reputation Power: 5 
akhilzid has no influence.
Offline Offline

City: Ernakulam
State: Kerala
RC Skills: Advanced
Posts: 541
Join Date: Sep, 2014



like the butterfly effect  Giggle Giggle
Logged
 

Read
« Reply #49 on: January 02, 2015, 05:49:34 PM »
sooraj.palakkad
with eyes in sky
Heli Lover
Forum Hero

*****

Reputation Power: 21 
sooraj.palakkad barely matters.sooraj.palakkad barely matters.
Offline Offline

City: Palakkad
State: Kerala
RC Skills: Expert
Posts: 2058
Join Date: Aug, 2014

SPN



Huh?Huh?
Logged

RC Hobbyist and an Aerial Cinematographer..
 

Read
« Reply #50 on: January 03, 2015, 06:57:29 PM »
cyberhack
Heli Lover
Forum Hero
*****

Reputation Power: 8 
cyberhack has no influence.
Offline Offline

City: MUMBAI
State: Maharashtra
RC Skills: Beginner
Posts: 637
Join Date: Aug, 2014



and now it flies good Smiley silly mistakes Tongue watch this ;)i knw i shouldnt fly at home bt :p its okie for nw Tongue
Logged
 

Read
« Reply #51 on: January 05, 2015, 02:38:58 AM »
anwar
Administrator
Forum Hero

*****

Reputation Power: 141 
anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!
Offline Offline

City: Doha (Qatar) & Thrissur
State: Kerala
RC Skills: Advanced
Posts: 11619
Join Date: Mar, 2009

RC India - Flying and racing with open minds !



Merged... please do not create multiple threads on the same issue !!! Bang Head
Logged

Hangar : Please see my introduction.
RC India forum and me : About this forum.
 

Read
« Reply #52 on: January 05, 2015, 02:48:55 AM »
cyberhack
Heli Lover
Forum Hero
*****

Reputation Power: 8 
cyberhack has no influence.
Offline Offline

City: MUMBAI
State: Maharashtra
RC Skills: Beginner
Posts: 637
Join Date: Aug, 2014


Re:

Umm I have mentioned it :p to delete I's there a option for us to delete a thread?
Logged
 

Read
« Reply #53 on: January 05, 2015, 02:49:43 AM »
cyberhack
Heli Lover
Forum Hero
*****

Reputation Power: 8 
cyberhack has no influence.
Offline Offline

City: MUMBAI
State: Maharashtra
RC Skills: Beginner
Posts: 637
Join Date: Aug, 2014


Re:

Thread end Smiley
Logged
 

Pages: 1 2 3 [All]   Go Up
Jump to:  

Related Topics
Subject Started by Replies Views Last post
kk 2 firmware update
Multirotors
sathish kumar 3 3196 Last post December 22, 2013, 07:24:45 PM
by cyromanish
APM 2.5 firmware update issue.
Servos, Gyros and All Electronics
SideWinder 9 17244 Last post March 21, 2014, 11:05:19 AM
by SideWinder
Orange rx firmware update tool
Free, Donations and Sweepstakes
yash10896 18 15311 Last post October 28, 2014, 06:54:49 PM
by yash10896
KK 2.1 Firmware update
Servos, Gyros and All Electronics
jeet8066 3 3388 Last post April 17, 2015, 05:24:38 PM
by SK1701
XM Plus RSSI Fix || Firmware Update
Kites, Trains, Free Flight and All Others
MakerHand 2 2896 Last post October 20, 2018, 09:30:19 PM
by MakerHand