|
Title: Arming and Disarming Post by: parichya.gautam on March 24, 2013, 12:55:50 AM I FINALLY got my Quad ready :D ... but now im having issue in Arming the quad . What i saw that i had to turn the transmitter right , then down to arm it , but all i get is a blue led when power is connected to the quad and continous BEEPING .
Back ground : I have KK Multicopter 5.5 board Bought an assembled kit from RC Fever : http://www.rc-fever.com/quadcopter/alloy-450-quadcopter-aircraft-combo-kit-not-assembled.html PLEASE help , it seems im near yet so far from flying my quad :D Title: Re: Arming and Disarming Post by: rcpilotacro on March 24, 2013, 08:19:45 AM trim your throttle down to zero and then try arming, might help
Title: Re: Arming and Disarming Post by: parichya.gautam on March 24, 2013, 08:27:23 AM I tried it , it didnt help ...
I have uploaded some pics and a video here to show the issue .. https://www.box.com/s/vitujfw85semprm5cwpc Title: Re: Arming and Disarming Post by: parichya.gautam on March 24, 2013, 08:30:41 AM UPDATE :
Well , this is strange now , The Quad is armed now but i cant get any response from the motors , only the usual periodic BEEP is coming .. Also , this is Random - Sometimes the frantic continous BEEP comes and then suddenly its get armed but no response from the motor . I built the quad in a day and was so happy that ill be able to fly it soon . And now the problems here . Please help me out , you are my ONLY hope . Title: Re: Arming and Disarming Post by: rcpilotacro on March 24, 2013, 08:38:35 AM (a) Depending on your Tx, some channels needs to be reversed
(b) you config looks like for + change it to X might work (c) Strapping the board with a rubber band seems to be a bad idea (d) Do not put the prop before you are very sure, these things can be very dangerous Title: Re: Arming and Disarming Post by: parichya.gautam on March 24, 2013, 09:00:54 AM a> ' Reversed ' as in( soory im totally new to this )
b> X .. how will i do that ? c> I actually have fixed it below , the rubber bands are just an extra precautionary measure :) d> No , the props are out now , will take care of that :) Title: Re: Arming and Disarming Post by: Dharmik on March 24, 2013, 09:11:24 AM Hi Gautam
As you have X config loaded, i think your board placement is wrong. The arrow on the board shows the directin. If you have X config, it should be between two arms. For + config it should be pointed to the one arm. Title: Re: Arming and Disarming Post by: parichya.gautam on March 24, 2013, 09:21:46 AM oh , ok ... and what about the arming issues ?
Title: Re: Arming and Disarming Post by: anwar on March 24, 2013, 09:27:02 AM About arming... http://www.rcindia.org/multirotors/quadrotor-build-thread/msg68736/#msg68736
Title: Re: Arming and Disarming Post by: parichya.gautam on March 24, 2013, 09:40:51 AM ive tried it , still doesnt help :(
Title: Re: Arming and Disarming Post by: Dharmik on March 24, 2013, 10:09:00 AM Is it FS-CT6B? Try increasing EPA to the max(120). Confirm which firmware you have loaded. Check pots. If your yaw pot is at 0 position, your board will remain in ESC calibration mode and give you beeps. Check tx config as well. Throttle zero position should be downside of the sticks.
Title: Re: Arming and Disarming Post by: parichya.gautam on March 24, 2013, 10:14:55 AM yes it is the same model ..
how do i increase the EPA ? nothing extra done from my side regarding firmware and stuff yaw pot is at 0 means ? Tx config in what sense ? yes the throttle position is downside 0 ( sorry im a newbie , but please help ) :) Title: Re: Arming and Disarming Post by: rcpilotacro on March 24, 2013, 10:27:32 AM what about the frimware
Title: Re: Arming and Disarming Post by: parichya.gautam on March 24, 2013, 11:08:35 AM i dont know ... the default one i guess ..i didnt tweak anything .,,
Title: Re: Arming and Disarming Post by: parichya.gautam on March 24, 2013, 05:54:24 PM ANYONE ???! . please help me out here ...
Title: Re: Arming and Disarming Post by: parichya.gautam on March 25, 2013, 03:30:31 PM Bump ...
Title: Re: Arming and Disarming Post by: rcpilotacro on March 25, 2013, 03:57:42 PM cant figure out , if you are willing, you could send it to me, will set it and send it back with instructions, if you are in a hurry
Title: Re: Arming and Disarming Post by: parichya.gautam on March 25, 2013, 04:00:19 PM OH ! .. this idea is actually good ! ... but wont the shipping will be costly ?
|