Title: BUILD LOG :: Mavic v4.1 - F3 (3D Printed) {CLONE} Post by: Shreyas_K on April 06, 2019, 09:41:30 PM Hey Guys,
This is the Build Log for the 3D printed Mavic Pro Clone, i.e., v4.1 - F3 , that I'm currently working on... Will try to post as many updates n pics as possible... Also, would like to take help from you guys, as I'm new to inav... I'm also working on a Mini Mavic (scaled down brushed version of the Mavic pro)... Will create a separate build-log for the same soon... **All credits and thanks to CDRskull - diyrc.co.uk for this amazing design** Title: Re: BUILD LOG :: Mavic v4.1 - F3 (3D Printed) {CLONE} Post by: Shreyas_K on April 06, 2019, 10:54:47 PM Parts I've gone with as of now :
1. SP Racing F3 Deluxe with integrated OSD 2. Spedix IS30 4-in-1 30A 2S-4S ESC 3. Cobra 2206 2100kv Motors 4. NZ mini GPS 5. FrSky D4R-II Receiver 6. HC-SR04 for Sonar Title: Re: BUILD LOG :: Mavic v4.1 - F3 (3D Printed) {CLONE} Post by: Shreyas_K on April 11, 2019, 07:19:15 PM ESC and Sonar attached...(https://uploads.tapatalk-cdn.com/20190411/f443c21e2c1e8e74bf3dfcd2ad0440bc.jpg)
Sent from my ASUS_Z01RD using Tapatalk Title: Re: BUILD LOG :: Mavic v4.1 - F3 (3D Printed) {CLONE} Post by: Shreyas_K on April 12, 2019, 04:21:41 PM First power up(https://uploads.tapatalk-cdn.com/20190412/8c4c20a4fee5c7186259e0c562db4bf3.jpg)
Sent from my ASUS_Z01RD using Tapatalk Title: Re: BUILD LOG :: Mavic v4.1 - F3 (3D Printed) {CLONE} Post by: madaquif on April 15, 2019, 08:38:53 PM looks neat @ Shreyas :thumbsup: :thumbsup: ...… any flight videos??
Title: Re: BUILD LOG :: Mavic v4.1 - F3 (3D Printed) {CLONE} Post by: Shreyas_K on April 15, 2019, 08:56:33 PM Thank you Sir :)
Broke the current Ultrasonic Sensor while desoldering the headers... Realized it quite late :banghead: All part of learning ;) So had to remove quite a few parts...have ordered for a better one...waiting for it to arrive 8-) Title: Re: BUILD LOG :: Mavic v4.1 - F3 (3D Printed) {CLONE} Post by: Shreyas_K on April 16, 2019, 10:00:46 AM Even though my QX7 is very close to the RX (D4R-II) , the RSSI is very Low (it displays in the TX)... Any idea as to why this might be happening ?? ( It was fine during the previous power up).
Thank you in advance for any help. Title: Re: Re: BUILD LOG :: Mavic v4.1 - F3 (3D Printed) {CLONE} Post by: Shreyas_K on April 19, 2019, 08:17:40 PM Parts I've gone with as of now : The HC-SR04 was changed to US-1001. SP Racing F3 Deluxe with integrated OSD 2. Spedix IS30 4-in-1 30A 2S-4S ESC 3. Cobra 2206 2100kv Motors 4. NZ mini GPS 5. FrSky D4R-II Receiver 6. HC-SR04 for Sonar Sent from my ASUS_Z01RD using Tapatalk Title: Re: BUILD LOG :: Mavic v4.1 - F3 (3D Printed) {CLONE} Post by: Shreyas_K on April 20, 2019, 12:20:31 PM Check out the first flight video :) : https://youtu.be/-FtBe7MdaOI
New to racequad FC flight modes ;) ; will upload a better video once I get a hang of it.. :)(https://uploads.tapatalk-cdn.com/20190420/4a1120447c67f2b935ba2efad2b3bb44.jpg) Sent from my ASUS_Z01RD using Tapatalk Title: Re: BUILD LOG :: Mavic v4.1 - F3 (3D Printed) {CLONE} Post by: sim_tcr on April 20, 2019, 02:01:58 PM What firmware?
What is the sonar module used for? Title: Re: BUILD LOG :: Mavic v4.1 - F3 (3D Printed) {CLONE} Post by: Shreyas_K on April 20, 2019, 02:12:37 PM What firmware? Firmware : iNAVWhat is the sonar module used for? Sonar module is used for low altitude hovering (altitude hold) Title: Re: BUILD LOG :: Mavic v4.1 - F3 (3D Printed) {CLONE} Post by: sim_tcr on April 20, 2019, 02:25:46 PM What firmware? Firmware : iNAVWhat is the sonar module used for? Sonar module is used for low altitude hovering (altitude hold) How is it performing? How is other nav functions performing. I too have a inav 5 inch quad with gps. Build log there too. Title: Re: BUILD LOG :: Mavic v4.1 - F3 (3D Printed) {CLONE} Post by: Shreyas_K on April 20, 2019, 02:28:31 PM What firmware? Firmware : iNAVWhat is the sonar module used for? Sonar module is used for low altitude hovering (altitude hold) How is it performing? How is other nav functions performing. I too have a inav 5 inch quad with gps. Build log there too. There is Baro I'm using a SP Racing F3 Deluxe board with integrated OSD (This one - https://robu.in/product/sp-racing-f3-flight-controller-integrate-osd-deluxe/ ) |