RC India

I have been googling around and found this info. You can expect one more hk board soon with some more advanced features. Please have look at this
https://twitter.com/#!/HobbyKingLive/status/201160190601592832/photo/1 (https://twitter.com/#!/HobbyKingLive/status/201160190601592832/photo/1)

ya bro they have mentioned about this on their FB Page too..

So we can expect gyro+acc with onboard display atleast..

gyro+acc will be great anything more than that will be awesome.... :thumbsup: :thumbsup:

Gyro+Acc will sell like hotcakes. Gyro+Acc+Mag+Baro will be a good second-buy.

Eagerly waiting for gyro+acc  (:|~ (:|~ will be first to buy it..

Attached pic. If you see gyro pots have been removed and push buttons added so we can set values using it. It seems new board will be compatible to octocopter.

According to hk whitin few weeks kk3 will be out and the board has gyro+acc. Production is underway
http://yfrog.com/mnca4bij

Thanks for the info eagerly waiting (:|~ (:|~

Yup. HK boards known for their plug and play functionality and affordable prices. If everything goes fine with this upcoming board, then it will be the biggest turning point in FPV, AP and multirotor history.

 :iagree: :iagree: I am gonna buy it for sure.....

Video released
http://www.youtube.com/watch?v=ZB9PAEzwkqo
RCG discussion topic
http://www.rcgroups.com/forums/showthread.php?t=1651010

And its out for sale and i placed order for one too  :giggle:

http://www.hobbyking.com/hobbyking/store/__24723__Hobbyking_KK2_0_Multi_rotor_LCD_Flight_Control_Board.html

With the accelerometer, this would make a good platform for initial heli training.  Ordered one ;)

Here is buddy code. Please check
http://www.rcgroups.com/forums/showthread.php?t=1675615

http://www.hobbyking.com/buddy.asp?code=0C2B9F49-E522-437D-9166-79EBA5AD7B37

Thanks Anwar bhai.
Here is original topic, kapteinkuk speaks
http://www.rcgroups.com/forums/showthread.php?t=1675613

http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=24723

check the video also. it supports fixed wing stabilization also. please some one bring that board here.

http://www.youtube.com/watch?v=ZB9PAEzwkqo&feature=player_embedded

Last post merged into existing thread on the same controller. 

Videos of new kk2.0 out now
Here is the walkthrough video
http://www.youtube.com/watch?v=gF-0rgxE9Uw
Here is the test video
http://www.youtube.com/watch?v=cLgbwBRVdZU
Anybody from rci got their board shipped?

hi dharmik mine was shipped on the 22nd

it has just reached india ;D will take another week before i have it on my hands will be using this one on my quad  ;D

Subbu

[Admin Note] Unwanted "Quote" removed... use "Reply" instead... See usage guidelines : http://www.rcindia.org/rc-india-forum/forum-usage-tips/

mine too :D

so my postman came in today and guess what he brought with him  ;D ;D ;D ;D

Subbu

anybody else get theirs

waiting for mine to reach me (:|~ (:|~

Get set go friends..

You might have seen this video. It shows what exactly auto level is.
http://www.youtube.com/watch?v=_ZPcww9MRRY

KK2 voltage alarm video tutorial. Requesting admin team to rename topic name "New KK2 multirotor controller(gyro+acc)"
http://www.youtube.com/watch?v=_jmjiIpQWTA

very cool stuff, subbu take a look at this bro..

i already did have a look at it and would love to do it but i dont have the necessary tools and the soldering skills to pull it off may be in december once i am back here after the first semester at college

Subbu

I received my board yesterday from anam sir. Since my previous quad is allready tuned, I just need to replace FC but I will have to change direction of landing skids as they are set for plus direction. If everything goes fine I will post test video soon.
If anybody having trouble with setup please check this guy's blog
http://oddcopter.com/2012/07/24/setting-up-my-hobbyking-kk2-0-quadcopter-x/
Admins can you please rename topic to appropiate name.

Here is a pic of received items and one more nice review.
http://fpvcentral.net/2012/07/kk-2-0-kk2-multicopter-controller-review/

i am also using mine. great board , very easy to tune things. i was using i86 but that didnt work because of other reason not board. but never got back to i86 after this.

KK2.0 accelerometer AUX channel setup for FS-CT6B and HK T6A
http://rcsci.blogspot.in/2012/07/kk20-accelerometer-aux-channel-setup.html

updated version of kk2.0 released.
http://www.rcgroups.com/forums/showpost.php?p=22390322&postcount=2078

Firmware v1.2 for KK2.0 out now
http://www.rcgroups.com/forums/showpost.php?p=22441438&postcount=2667

i saw this but how do we update board??

Same as we did with hk board. This firmware is available over LZ tool now.

ohhh so we do have pins to connect usbasp with this board too??

Yes that 10pin to 6pin. Here is a video
http://www.youtube.com/watch?v=EEErn75SOIw

Very nice thanks bro :) :thumbsup:

Flashed v1.2 today

Flash the firmware from repository.
Flashing firmware from file.: E:\lz\tmp\kk2_1V2\kk2.hex

E:\lz\lib\avrdude\windows\avrdude.exe -C E:\lz\lib\avrdude\windows\avrdude.conf -p m324pa -P usb -c usbasp -B 8 -e -U flash:w:E:\lz\tmp\kk2_1V2\kk2.hex:i

avrdude.exe: set SCK frequency to 93750 Hz
avrdude.exe: warning: cannot set sck period. please check for usbasp firmware update.
avrdude.exe: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.02s

avrdude.exe: Device signature = 0x1e9511
avrdude.exe: erasing chip
avrdude.exe: set SCK frequency to 93750 Hz
avrdude.exe: warning: cannot set sck period. please check for usbasp firmware update.
avrdude.exe: reading input file "E:\lz\tmp\kk2_1V2\kk2.hex"
avrdude.exe: writing flash (30190 bytes):

Writing | ################################################## | 100% 18.21s

avrdude.exe: 30190 bytes of flash written
avrdude.exe: verifying flash memory against E:\lz\tmp\kk2_1V2\kk2.hex:
avrdude.exe: load data flash data from input file E:\lz\tmp\kk2_1V2\kk2.hex:
avrdude.exe: input file E:\lz\tmp\kk2_1V2\kk2.hex contains 30190 bytes
avrdude.exe: reading on-chip flash data:

Reading | ################################################## | 100% 17.00s

avrdude.exe: verifying ...
avrdude.exe: 30190 bytes of flash verified

avrdude.exe done.  Thank you.

Any changes in the board??

Satya bro i see some new features. Now main screen shows battery voltage. Here are some changes according to KK

CHANGES:
1: Removed: LCD contrast adjustment: Not necessary.
2: Removed: "I of PI" on/off mode: No practical use found.
3: Removed: I part of self-level: Does not work with slow reacting ACC.
4: Changed: default gains to 50/50/50 (roll/pitch/yaw) P-term, and 25, 25, 50 I-term.
5: Added: beep (short beep, 2 sec delay) when armed and throttle closed, for extra safety. Makes the KK2 a bit more noisy when armed so the user does not forget it is armed.
6: Added: longer arm/disarm beep.
7: Added: ACC trim. Use it to adjust self-level attitude, no need to recalibrate sensors. Adjust in "Self-level Settings" menu.
8: Added: factory reset.
9: Added: status messages on the "SAFE" screen. The KK2 will not arm unless it says "OK.". Error messages can only be reset by cycling the power, except for the "sensors not calibrated" message, which is reset after a successful sensor calibration. Error messages include lost RX connection.
10: Bug fix: wrong offset in flying wing mix table.
11: Changed: doubled self-level stick response. Let you have more control in self-level mode.
12: Added: CPPM (sum PPM) mode. Turned on/off in "Mode Settings" menu. Also the assignments of the CPPM channels can be changed in "CPPM Settings".
13: Added: Y4 and V-tail layout.
14: Added: shows battery voltage on the "SAFE" screen.
15: Added: lost aircraft alarm. Starts to beep (1 sec on and 4 sec off) after 30min of no activity (arm/disarm).
16: Added: LP filter on servo outputs. Adjust in "Misc. Settings". A good start value is 50.
17: Added: auto-disarm. The KK2 will disarm itself after 20 sec if throttle is at idle. For extra safety. Can be turned on/off in "Mode Settings" menu.