|
Title: crash all you want...... Post by: Rc Mumbai.com on June 14, 2014, 01:54:27 PM http://www.youtube.com/watch?v=WgxGYE6gloc#ws (http://www.youtube.com/watch?v=WgxGYE6gloc#ws)
Title: Re: crash all you want...... Post by: jaspreet.guitar on June 14, 2014, 02:32:19 PM Unfortunately, this is not in production anymore.
Title: Re: crash all you want...... Post by: Rc Mumbai.com on June 14, 2014, 02:43:52 PM trying to bring something similar.......
lighter and unbreakable which can be mounted on almost all types of frames Title: Re: crash all you want...... Post by: mhkabir98 on June 14, 2014, 10:42:48 PM I have a developer edition of the SFC airframe which you linked above, and while it was fairly OK, it never fulfilled my expectations. It was rather flimsy due to no actual structural core.
If you're trying to bring something 'new' I hope it isn't standard CF prop guards or foam rings and is innovative. Can you elaborate? I'm following your progress with interest since I build mini research copters which often have to fly indoors due to system requirements. I usually have my own CF/aluminium copters with CF/3d printed prop guards which are crash proof but don't keep stuff getting into the prop from top. I'm working with a prop protection system which I borrowed from Astec, which should provide total protection, but it remains to be tested in flight. Fare thee well! Title: Re: crash all you want...... Post by: Rc Mumbai.com on June 14, 2014, 10:59:54 PM i would love to get hands on that frame if possible
what i will be developing will be only prop guard usable with many different types of frames and it will be available in various sizes 8" to 15" final goal soft outer covering hard inner layer of ring net with an x shaped cf rod on the top and bottom final result throw a stone at it....... Regards Chintal Rcmumbai.com |