|
Title: DIY gimbal for DJI naza m lite Post by: anchi1512 on October 01, 2020, 06:35:30 PM Hello friends,
I need your help in setting up the gimbal on naza m lite fc. Just purchased sg90 servo only to test if it will work or not. Plugged it turned on the quad and servo is not stopping. It is going back and forth continuously. Tried to switch it to different frequency but it didn’t help. Can anyone help? Title: Re: DIY gimbal for DJI naza m lite Post by: Wil28 on November 21, 2020, 01:06:32 AM Hi,
As per the instruction guide/manual (http://dl.djicdn.com/downloads/naza-m%20lite/en/NAZA-M%20LITE_User_Manual_v2.00_en.pdf), you'll find the freq setting info on page 30 stating to stick to the max servo freq. The sg90 operates at a freq of 50Hz, so changing the frequency won't help. Go through the following steps and notes carefully, let me know if there is some other issue.I'll try my best to resolve it. |