RC India
Welcome Guest, please login or register.
 
Pages: [1]   Go Down
0 Members and 1 Guest are viewing this topic. Topic Tools Topic Tools 
Read
« on: October 01, 2020, 06:35:30 PM »
anchi1512
Heli Lover
Active Member
**

Reputation Power: 1 
anchi1512 has no influence.
Offline Offline

City: Allahabad
State: Uttar Pradesh
RC Skills: Beginner
Posts: 8
Join Date: Sep, 2014




Hello friends,

I need your help in setting up the gimbal on naza m lite fc.

Just purchased sg90 servo only to test if it will work or not.  Plugged it turned on the quad and servo is not stopping. It is going back and forth continuously.

Tried to switch it to different frequency but it didnít help.

Can anyone help?
Logged
 

Read
« Reply #1 on: November 21, 2020, 01:06:32 AM »
Wil28
Plane Lover
Active Member
**

Reputation Power: 1 
Wil28 has no influence.
Offline Offline

City: Panaji
State: Goa
RC Skills: Beginner
Posts: 5
Join Date: Nov, 2017



Hi,
As per the instruction guide/manual (http://dl.djicdn.com/downloads/naza-m%20lite/en/NAZA-M%20LITE_User_Manual_v2.00_en.pdf), you'll find the freq setting info on page 30 stating to stick to the max servo freq. The sg90 operates at a freq of 50Hz, so changing the frequency won't help. Go through the following steps and notes carefully, let me know if there is some other issue.I'll try my best to resolve it.
Logged
 

Pages: [1]   Go Up
Jump to: