RC India
Welcome Guest, please login or register.
 
Pages: [1]   Go Down
0 Members and 1 Guest are viewing this topic. Topic Tools Topic Tools 
Read
« on: February 10, 2015, 04:07:51 PM »
rcimpulse
Akshay
Plane Lover
Forum Veteran

****

Reputation Power: 4 
rcimpulse has no influence.
Offline Offline

City: Bangalore
State: Karnataka
RC Skills: Intermediate
Posts: 314
Join Date: Apr, 2013




Have been using the DJI AVL 58 5.8G Downlink Tx and Rx on the Phantom 2 with H3-2D gimbal for almost two years now and it worked like a charm until recently I tried to cut the wires down to length to tidy up the installation and make my FPV setup more neat. That said I made sure all the positive and negative terminals were connected correctly before the final solder.
 
Before going further I will tell you my setup initially, in between and currently.
When the Phantom 2 was released in Nov 2013 it did not come with the FPV hub and one had to directly tap power from the PDB and tap video from the Provided video downlink. It was a little tricky to instal back then but I managed to power the TX with a JST from main power and hook up video to TX and it worked well until recently. I have done about forty flights since with no problem.
Two weeks ago I cut the A/V and power cables to tidy up and make provision for another FPV screen/goggles. I also tapped the video signal and make it into three (heard thats a bad thing) Bang Head I connected everything correctly as per the diagram and  same as before then powered on my Phantom. ALL the correct LED's blink and I matched the channels correctly the fan on TX runs fine, on ground end my Rx and Screen work fine. NO VIDEO  Head Scratching I  tried various display options but no video signal. I also tried another Tx Rx with my display and works fine too.
Recently ordered the FPV hub to connect the devices neatly plugged it all in as per instructions (with or without IOSD) NO video.
All software is up to date IOSD has never worked and needs rectifying ANY HELP would be much appreciated.
Logged
 

Read
« Reply #1 on: February 11, 2015, 09:38:10 PM »
rcimpulse
Akshay
Plane Lover
Forum Veteran

****

Reputation Power: 4 
rcimpulse has no influence.
Offline Offline

City: Bangalore
State: Karnataka
RC Skills: Intermediate
Posts: 314
Join Date: Apr, 2013



Anyone who owns this Tx Rx can share some thoughts?
Logged
 

Pages: [1]   Go Up
Jump to:  

Related Topics
Subject Started by Replies Views Last post
DIY video game/video player console
Self-designed, DIY and College Projects
izmile 3 5716 Last post January 28, 2011, 03:44:13 PM
by izmile
In car video
Cars
karthikr_2922 19 15373 Last post September 22, 2010, 10:30:17 PM
by traxxrc1
Futaba sending scrambled signal on rudder channel
Radios and Receivers
SunLikeStar 23 6503 Last post April 30, 2011, 08:21:50 PM
by SunLikeStar
The video, the making-of video and a octocopter crash
Chatter Zone
anwar 0 3318 Last post June 19, 2012, 08:18:10 AM
by anwar
Sending an 18 channel receiver (spektrum) to USA...any prob?
RC General Topics
murcielago 1 3216 Last post October 30, 2013, 12:32:39 PM
by Shannon