I would sharing the up-gradation build log of my FPV frame which i had earlier built
http://www.rcindia.org/multirotors/working-on-new-fpv-frame-for-my-multirotor/I am upgrading my frame booms from 13mm aluminum to 15mm CF square rods. And GF sheets to CF sheets (1.5mm)
And FC from KK2.1 to APM Pro
pictures of the frame build so far
CF sheet and rods
V2.0 of my earlier FPV frame
After CNC
V2.0 of my earlier FPV frame
Booms i am routing the wires within the booms it makes it less messy
V2.0 of my earlier FPV frame
V2.0 of my earlier FPV frame
I made a small Board camera mount using CF sheets
V2.0 of my earlier FPV frame
V2.0 of my earlier FPV frame
All together
V2.0 of my earlier FPV frame
V2.0 of my earlier FPV frame
Using little micro servo (emax 9 frame metal digital) to control the tilt mech
V2.0 of my earlier FPV frame
V2.0 of my earlier FPV frame
And the best part the frame arms can be folded
V2.0 of my earlier FPV frame