|
Title: Evo 3 Brushed Controller : Cannot save the port Post by: tahmadblr on December 07, 2017, 11:26:07 AM Hi,
Needed suggestion for this issue with setting my SBUS receiver on EVO 3 Quad Controller As it is an SBUS receiver, I need to enable the port as serial and save it. Using Betaflight, it is not able to save the UART port as Serial. The moment I do a "Save and Reboot" and login back to the Configurator Interface, it is disabled. receiver model : https://hobbyking.com/en_us/fm800-super-mini-fasst-compatible-8ch-receiver-with-sbus-cppm.html?___store=en_us Please suggest if there is anything else, that needs to be done to have the SBUS receiver paried and configured. Thanks Title: Re: Evo 3 Brushed Controller : Cannot save the port Post by: harshit batra on December 07, 2017, 02:09:40 PM Try to reflash the firmware,i was also not able save the settings for reciever although it was ppm not sbus but reflashing helped me solve the issue.
Title: Re: Evo 3 Brushed Controller : Cannot save the port Post by: tahmadblr on December 10, 2017, 02:59:55 PM The firmware was already refreshed.
The issue was : Just need to select the "Serial" checkbox of the UART port (Under Posrts Menu) on which the receiver is soldered. ** This is for SBUS only. Need not to touch any other sliders. To repeat the process entirely : 1. Select only the "Serial" checkbox, Save and Reboot. 2. Next select the SBUS receiver and the subcategory. Save and Reboot. I was primarily following the Videos on YouTube. But what you see in all YouTube channels is to move the sliders to "On Postition" along with the "Serial" checkbox. In my case if I do this, it does not save the values. Not at all. >> For SBUS select only the "serial" checkbox Thanks to "@Ujjwana" to help offline. Title: Re: Evo 3 Brushed Controller : Cannot save the port Post by: tahmadblr on December 10, 2017, 03:06:12 PM Insert image does not work, not sure why. Attached screenshot of Cleanflight application for showing the example.
|