|
Title: GC -HORNET Post by: ad! on December 03, 2015, 08:45:23 PM Hello everyone I am Aditya Bisht. I am apparently new to this forum but have been flying past one year.
This is my entry for the ‘Game Changers 2015’ competition. I would like to thanx RC MUMBAI for providing such platform. So now coming to the build. I have been flying a ~400 quad earlier which i made a few months back.But seeing the agility of 250 racer quad i decided to build one.4 I am a ME student and we build things from ground...So after sum calculations made the frame(base plate) from aluminium composite using basic hand tools. Here is my current setup 1.Body is of Aluminium composite. 2.Motors DYS BE 1806 black Edition 3.12Amp emax BlHeli esc 4.CF 5030 props 5.Naze 32/kk2 6.3mm CF arms 7.NEO M GPS Title: Re: GC -HORNET Post by: ad! on December 03, 2015, 08:54:25 PM The center plate
Title: Re: GC -HORNET Post by: ad! on December 05, 2015, 06:08:36 PM completed the frame today ..
The frame is a symmetrical one ,that means lower calculation for FC Dampers are place below the FC plate. Battery tray is of carbon fibre from some other chinese quad .I customized it to fit on my quad Battery would be straped on top so as to reduce pendulum effect . Bare frame weight 102gms Title: Re: GC -HORNET Post by: ad! on December 05, 2015, 06:10:41 PM The red lining is the vibration dampening washers between the frame and arms.
The frame is designed to accommodate 5-6 props. Large size board like KK2 can be well placed inside the cage which provides protection to the FC. Title: Re: GC -HORNET Post by: Tanmay.mathur on December 05, 2015, 06:34:21 PM Bare frame weight ?
Title: Re: GC -HORNET Post by: ad! on December 05, 2015, 06:39:22 PM Will post that soon !!!
Weight machine not working :banghead: Title: Re: GC -HORNET Post by: Swapnil on December 05, 2015, 07:39:37 PM Good Job! {:)}
Which FC are you going to use? Title: Re: GC -HORNET Post by: ad! on December 05, 2015, 08:03:45 PM Thnnx Buddy ..
I have ordered Naze 32..if it dose not get delivered in time will be switching to multiwii or KK2 Title: Re: GC -HORNET Post by: ad! on December 05, 2015, 08:04:15 PM The Frame weights a mere 102gms
Title: Re: GC -HORNET Post by: ved on December 05, 2015, 08:46:59 PM Nice design. Looks like it's gonna rip everything apart.
Title: Re: GC -HORNET Post by: ad! on December 05, 2015, 09:37:07 PM hope so >:D
Title: Re: GC -HORNET Post by: Tanmay.mathur on December 05, 2015, 11:36:53 PM Wow light . I to made a 800 octa with 230 gms
Title: Re: GC -HORNET Post by: ad! on December 07, 2015, 08:07:58 AM Completed the fiber Glass canopy .
This will reduce drag while high speed maneuvering ;D Started from a foam block , hand sanded it to the required shape and molded fiber glass with epoxy all over it. This canopy will also prevent some damages in case of a crash since i will be flying at close proximities around obstacles. Title: Re: GC -HORNET Post by: aniket210696 on December 07, 2015, 02:43:02 PM nice design! just a though, t adding vibration dampening balls vertically on the quad may induce horizontal vibrations on the fc plate... perhaps if you mounted them at angles? and if you intend this to be a racing quad, what i have found is that this type of mount can make the quad feel mushy while flying....
by the way, what epoxy did you use with the fiberglass? Title: Re: GC -HORNET Post by: ad! on December 07, 2015, 04:46:54 PM Yeah i realized that later during the build.... The final version will be having vibration absorbing tape between fc and centre plate.
The epoxy is sum chinese one ...got it from ebay Title: Re: GC -HORNET Post by: ad! on December 08, 2015, 08:57:47 PM Started with the Esc programming today ...Emax offers 7 different programmable parameters which can be set by the tx.
Since this gets confusing with so many sounds i prefer using a programming card ,its fast and accurate. Title: Re: GC -HORNET Post by: ad! on December 08, 2015, 09:08:23 PM Blheli
Title: Re: GC -HORNET Post by: ad! on December 10, 2015, 10:27:41 PM Soldering complted
Title: Re: GC -HORNET Post by: ad! on December 10, 2015, 10:32:55 PM ;)
Title: Re: GC -HORNET Post by: ad! on December 14, 2015, 08:25:45 AM All wiring done..Naze 32 Cleanflight
Title: Re: GC -HORNET Post by: ad! on December 14, 2015, 08:27:09 AM WS2812 led at the rear
Title: Re: GC -HORNET Post by: ad! on December 14, 2015, 08:30:08 AM Twin projector 3w led beneath the cowl.. Also added another base plate for improved rigidity.
Title: Re: GC -HORNET Post by: satyagupta on December 14, 2015, 09:52:01 AM Nice build.
Title: Re: GC -HORNET Post by: ad! on December 14, 2015, 01:49:54 PM thnx sir ....control board n motor are from Quadkopters ;D
Title: Re: GC -HORNET Post by: satyagupta on December 14, 2015, 03:15:24 PM Thats nice, i really liked the hood and the main body that you build by yourself rather than buying something :)
Title: Re: GC -HORNET Post by: ad! on December 14, 2015, 07:44:18 PM thnx sir :hatsoff:
Title: Re: GC -HORNET Post by: ad! on December 16, 2015, 03:38:48 PM Props
Title: Re: GC -HORNET Post by: ad! on December 16, 2015, 03:39:43 PM Carbon fibre T-style
Title: Re: GC -HORNET Post by: ad! on December 22, 2015, 08:18:14 AM Added the Sonar module....Altitude lock
Title: Re: GC -HORNET Post by: ad! on December 24, 2015, 06:18:37 PM https://www.youtube.com/watch?v=FUWZt6xuMI4
Title: Re: GC -HORNET Post by: ad! on December 24, 2015, 06:19:52 PM Only a few seconds flight but please notice the quads stability
the receiver died mid air :banghead: |