Title: help to build my first quadcopter Post by: tanmoy35 on September 26, 2014, 01:22:22 AM I am using
X525 frame Kk2.2 board Flysky th9x transmitter receiver Sunny angel 980kv motors Everything is set....when I callibrated the esc only 2 motors of opposite direction works....i ain't understanding what the problem is...can any one help... Title: Re: help to build my first quadcopter Post by: akhilzid on September 26, 2014, 02:18:04 AM how did you calibrated?
esc direct connected to rx or through kk board? Title: Re: help to build my first quadcopter Post by: satyagupta on September 26, 2014, 08:11:10 AM you mean only 2 motors rotate or 2 rotate first and 2 later?
Title: Re: help to build my first quadcopter Post by: tanmoy35 on September 26, 2014, 09:57:38 AM Calibrated through kk board
Title: Re: help to build my first quadcopter Post by: tanmoy35 on September 26, 2014, 09:59:39 AM I have set the system In x quad manner on only 1st and 3rd motors are rotating
Title: Re: help to build my first quadcopter Post by: akhilzid on September 26, 2014, 10:01:34 AM is the other motors running while increasing throttle?
if not check your esc to motor connection, Title: Re: help to build my first quadcopter Post by: tanmoy35 on September 26, 2014, 10:15:57 AM Yes the other 2 motors are working fine
Title: Re: help to build my first quadcopter Post by: satyagupta on September 26, 2014, 10:22:29 AM Your answers are helping others to help you.
The 2 motors out of 4 are working right? The other 2 motors they dont work at all or they work but slow compared to other motors? Meaning they start spinning late? Title: Re: help to build my first quadcopter Post by: tanmoy35 on September 26, 2014, 10:29:14 AM 2 motors don't work at all . Other two are well calibrated
Title: Re: help to build my first quadcopter Post by: tanmoy35 on September 26, 2014, 10:34:30 AM Satya da I brught all the parts through ur website order no.201409060....posted a mail about esc and motor today itself
Title: Re: help to build my first quadcopter Post by: satyagupta on September 26, 2014, 10:48:10 AM Can you check the ESC soldering and connection once again? its not possible that 2 of the ESC are not working at all.
Title: Re: help to build my first quadcopter Post by: tanmoy35 on September 26, 2014, 11:52:54 AM I tried connecting working motor with non working esc and non working esc with with working motor then none of the motor works
Title: Re: help to build my first quadcopter Post by: akhilzid on September 26, 2014, 11:57:40 AM try checking each esc direct connected to rx
Title: Re: help to build my first quadcopter Post by: satyagupta on September 26, 2014, 12:21:49 PM Can you check the ESC connections i.e the soldering again? may be the soldering or the joints are not perfect.
Title: Re: help to build my first quadcopter Post by: tanmoy35 on September 26, 2014, 05:01:45 PM I soldered the whole setup all again....and tried different esc with different motors...conclusion esc all r fine but 2 motors just vibrate and get heated up very fast
Title: Re: help to build my first quadcopter Post by: satyagupta on September 26, 2014, 05:54:43 PM check the connection between the ESC and the motors. Motors vibrating means out of 3 wires only 2 or 1 is connected.
Title: Re: help to build my first quadcopter Post by: tanmoy35 on September 26, 2014, 06:27:44 PM Tried soldering it but same prob
|