|
Title: In-Adequate equipment ? Post by: parichya.gautam on January 30, 2013, 06:28:07 PM Majority of my quad is set up , but the part where I need to join the wires to the wires from the motor to the M.Board and the battery . I have a distribution board, but the way the joints at the end of the motor are , it is totally different ! I've added some pics for and idea ( sorry about the quality ) . Please help if you can .
Title: Re: In-Adequate equipment ? Post by: rajathv8 on January 30, 2013, 06:57:48 PM 1. The motor is to be connected to the ESC (3 Wires)
2. ESC power supply wires need to be connected to the Distribution Board (DB) 3. ESC signal wire need to be connected to the FC Board 4. The battery needs to be connected to the DB What doubt do you have? :) Title: Re: In-Adequate equipment ? Post by: parichya.gautam on January 30, 2013, 06:59:37 PM the end ports of the parts dont fit anywhere ... thats my issue
Title: Re: In-Adequate equipment ? Post by: AEROVISHWA on January 30, 2013, 08:52:12 PM cut the connectors from the ESC (battery connector) and solder the naked wires to the distribution board.. just to remind u.. red is +ve and black is -ve.....
Title: Re: In-Adequate equipment ? Post by: parichya.gautam on January 30, 2013, 09:27:35 PM I have that idea , but was thinking of a way other than cutting and soldering them ...
Also , i need a clearer view on which socket to go where Title: Re: In-Adequate equipment ? Post by: rajathv8 on January 30, 2013, 11:48:43 PM If you dont want to cut connectors off the ESC you need to find a way to solder connectors onto the board. :)
The advantage would be that you need not de-solder and solder while changing ESCs. Title: Re: In-Adequate equipment ? Post by: parichya.gautam on January 30, 2013, 11:52:54 PM OK , got it .. but what about the way in which i have to connect the different ports ? .. like where will the Rotor's plug go in th eMain Board and where will the battery be connected ? .. I have the pics , if something can be given with reference with the pics ? :)
Title: Re: In-Adequate equipment ? Post by: Dharmik on February 01, 2013, 10:09:26 AM Here is the wiring diagram
(http://www.af9y.com/MotorEscConn2.jpg) |