MultiRotors!! MultiRotors!! MultiRotors!!
ST800 Carbon Fiber X-Copter 820mm Folding Hexacopter FPV Framehttp://rchobbyaddict.com/product_info.php?products_id=654MultiRotors!! MultiRotors!! MultiRotors!!
Features:- Adopts high quality Carbon Fiber material, with aluminium connector to ensure fastening effect
- With 6pcs 18mm Carbon fiber tube and motor mounting plate
- Landing skid connector:14mm carbon fiber tube for easy installation
- Landing skid Bracket: adopts 12mm carbon fiber tube,Compatible with most FPV PTZ
- with 2pcs extend board, for GPS, Receiver abd other devices installation
- Battery board adopts metal connector fastening, can adjust gravity via slider
Specifications:- Wheelbase:820mm
- Height:440mm
- Empty Frame Weight:1090g
- Payload Capability:1500~2500g
- Flight Time:>10 minutes
- We recommend you use 15inch propeller
- Recommend ESC: DYS 40A SimonK ESC
ST360 ARFT Quadcopter Kit (Almost Ready To Fly Quadcopter)http://rchobbyaddict.com/product_info.php?products_id=655MultiRotors!! MultiRotors!! MultiRotors!!
Specifications:Length: 14.2in (360mm)
Height: 3.5 in (90mm)
Weight: 170g (6 oz) Frame Weight
Width / Diameter: 14.2in (360mm)
Flying Weight: 1200g (42.3 oz)
Motor or Engine: ST2210 Brushless Outrunner Motor
Batteries: Required: 3S 11.1v 2200mAh-5000mAh LiPO -
Included:1 x ST360 Quadcopter Frame
4 x 2210 motor
4 x 20A ESC
1 x Optimus Controller(Economical one)
2 x Propeller 8x4.5 Normal Rotating
2 x Propeller 8x4.5 Counter Rotating
Required:1 x 3s LiPo Battery
Battery Charger
6ch Radio
OPTIMUS Flight Controller Economical Versionhttp://rchobbyaddict.com/product_info.php?products_id=656MultiRotors!! MultiRotors!! MultiRotors!!
Introduction:Multi-rotors flight controller is an autopilot system designed for aircraft model hobbyists, which is mainly used on multi-rotor aircrafts. The autopilot system has the functions of attitude stabilization. It is very popular in amusement, aerial photography and other FPV activities.
Package Included:Main Controller (MC) ×1
The Main Controller (MC) is the brain of the system. Through it, ESCs are connected to the RC receiver and other equipment to achieve autopilot function. It has a built-in Inertial Measurement Unit (IMU), which including three-axis accelerator and gyroscope.
Versatile Unit (VU) ×1
It includes a LED light which indicates different states of the aircraft and a USB port for configuration.
USB Cable ×1
This cable is used to configure MC.
3-PIN Servo Cable ×7
Cables are used to connect the MC and the receiver.