Main Menu

need a help in DJI naza

Started by Nik, January 15, 2015, 04:14:47 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Nik

Hi friends ,
i bought a new naza m lite flight controller with gps and using in
x450 frame ,
with sunny sky motor 980 kv
,simonk 30amp esc
and 11.1v 3.3 amp 25c battery.

but the problem is when it try to take off it getting flip right side , and can't fly.
so what is the problem in ?
and how do i fix these problem ...

bhanu

check motor rotation + propeller mounting,

sooraj.palakkad

do all motors start spinning same time ?
Have you done ESC calibration ?
Check motor directions,
And mount correct props.
RC Hobbyist and an Aerial Cinematographer..

sushil959897

can u tell me which transmitter & receiver is good for quadcopter. my budget is 5000 to 7000.

sooraj.palakkad

@sushil959897
Welcome to the forum :)

For a Quad you can go for atleast a 6Ch radio, Like Flysky FS-T6
As you have Budget, you can consider Flysky or Turnigy 9Ch radios.
RC Hobbyist and an Aerial Cinematographer..

sushil959897

is there any  warranty on that product

Nik

@ yes bhanu motor direction are correct.....

@ sooraj i just calibrate esc ... before these i never calibrate esc.. i thought dji has auto calibration .
  i did calibration  and i will check my quad .. hope so it will working good ...

thank you bhanu and sooraj

sooraj.palakkad

Nik, ESC calibration is a very Important step for any Multirotor. Don't Know whether NAZA has auto ESC calibration, anyway give it a try :)
RC Hobbyist and an Aerial Cinematographer..

gunnu

Quote from: Nik on January 15, 2015, 04:14:47 PM

but the problem is when it try to take off it getting flip right side , and can't fly.
so what is the problem in ?
and how do i fix these problem ...

hello, do transmitter calibration...

Nik

hi friends ... i did esc calibration and also calibrate tx ... but still same problem ...
what to do ? plz help me out ..

phanivyas

how did you mount the controller on the frame including GPS ? could you post a pic of that?



check the above link for any reference.

SphereHobbies

Hello Friend

Please see the manual of NAZA lite. It is very simple setup. Download DJI NAZA lite assistant software.

We can help you on team viewer. We can offer free installation and test flight. You need to visit Ahmedabad.

Sphere Hobbies.
099251-20630

Sphere Hobbies
+91-99251-20630
www.spherehobbies.com/india
You can trust the radio so much until your first crash with it.

Nik

thank you panivyas  for rpely ..
i check all my connection , motor and prop direction... but still no change..   :banghead: :headscratch:
what to do yaar ...

Nik

ohhkk great idea...  :)
thank you sphere hobbies...

viraj1991

#14
motor rotation
propeller mounting
esc caliberation
tx caliberation
tx channel reverse (if needed-follow dji videos on their channel),
basic cali. - go to assistant software > tools > check imu status and do basic caliberation
on the field - compass caliberation.
also check in which mode you take off > GPS atti. , atti. , or manual .... naza can be easily flipped in manual mode.
i am assuming you are in manual mode and have channels reversed, get it right. :) all the best  8-) ;D


gunnu

Quote from: sooraj.palakkad on January 15, 2015, 08:20:43 PM
Don't Know whether NAZA has auto ESC calibration, anyway give it a try :)
no there is no option in naza lite for auto calibration of ecs. @Nik you have to manually calibrate esc through receiver..
and check weather  direction of gps and fc is same. and configure your naza with assistant software again...

sbajare

hi,

using naza mlite and facing similar isssues.

there is major problem with the m lite.

Sandeep Bajare
Ph - 9175342600

gunnu



i am going to replace esc . lets see what happens?

gunnu

Quote from: gunnu on January 23, 2015, 06:02:31 PM


i am going to replace esc . lets see what happens?

sorry posted on wrong thread.. admin plz remove this post

viraj1991


gaurav jain

hey plz check motor 1st motor  is connected in naza controlling board pin in m1 port


1st motor is m1
2nd motor is m2
3rd motor is m3
just like that


so are made wrong connectoin thats y quad alway flip

1st motor is m4
2nd motor is m1

like this so plz chek i think ur problem is solve.   

Nik

Finally my quad flying great after some trouble ..
Thanks to Rc India and most thanks to my friends
Who ever helped me  {:)} :salute:  .. Soo happy after saw quad flying in GPS mode.