|
Title: need help with betaflight remapping Post by: Imperial fire on July 12, 2018, 06:09:40 PM i need to power a 15W focus light for night fpv ...
i have decided to use the vbat output on the f.c provided for the camera... so firstly ill have to connect vbat and cam pads ( purple circle ) ....so that i get vbat on the red circle cam port.. now i want to control the cam port using a switch channel on my radio... how do i do that in betaflight? is it possible ? i mean i want to be able to just turn it on and off. i understand that i will have to do that in ports tab.. but i know nothing more. a little direction will help. :hatsoff: Title: Re: need help with betaflight remapping Post by: Imperial fire on July 12, 2018, 06:11:50 PM * i understand i will have to do that in modes tab( not ports) ...
Title: Re: need help with betaflight remapping Post by: kn8alpha on July 12, 2018, 06:44:14 PM The CAM is not a port connected to the flight controller chip. It's just a power trace. It's not even the video IN line that usually goes to the OSD.
Sorry, but there's no way to control using the CAM line. Better option would be to add a relay and connect to one of the servo ports. |