RC India
Home Help Calendar Login Register
Welcome Guest, please login or register.
 
Pages: 1 [2]  All   Go Down
0 Members and 1 Guest are viewing this topic. Topic Tools Topic Tools 
Read
« Reply #25 on: July 26, 2016, 09:43:20 AM »
sandyx
Trucker
Plane Lover
Active Member

**

Reputation Power: 1 
sandyx has no influence.
Offline Offline

State: Kerala
RC Skills: Beginner
Posts: 88
Join Date: Jun, 2015
From what i understand,

- You're using the same wiring harness for both cams. ie, connectors/cables are the same for both cams but only one cam works in direct case with this same harness.
- Your osd cable is in proper working condition.

Check continuity of all cables involved, connector to connector when plugged in. Separately check ohm range resistance btw video & ground wires of osd cable.
Logged
 

Read
« Reply #26 on: July 26, 2016, 09:46:55 AM »
merin_83
Heli Lover
Senior Member
***

Reputation Power: 3 
merin_83 has no influence.
Offline Offline

City: Bangalore
State: Karnataka
RC Skills: Intermediate
Posts: 164
Join Date: Aug, 2011
The section from hs1177 to the wiring harness is different  as it a different connector from other cam. So it's a possibility. Will try continuity. ..
Logged
thanks,
merin
 

Read
« Reply #27 on: July 26, 2016, 12:23:45 PM »
merin_83
Heli Lover
Senior Member
***

Reputation Power: 3 
merin_83 has no influence.
Offline Offline

City: Bangalore
State: Karnataka
RC Skills: Intermediate
Posts: 164
Join Date: Aug, 2011
I did a continuity test for the foxeer cable. . Micro jst to Jr type... power and ground passed but video failed  Bang Head
Logged
thanks,
merin
 

Read
« Reply #28 on: July 26, 2016, 12:25:48 PM »
sandyx
Trucker
Plane Lover
Active Member

**

Reputation Power: 1 
sandyx has no influence.
Offline Offline

State: Kerala
RC Skills: Beginner
Posts: 88
Join Date: Jun, 2015
There you go. Fix it.

By foxeer cable, i hope you meant the normal type.
Logged
 

Read
« Reply #29 on: July 26, 2016, 12:29:00 PM »
merin_83
Heli Lover
Senior Member
***

Reputation Power: 3 
merin_83 has no influence.
Offline Offline

City: Bangalore
State: Karnataka
RC Skills: Intermediate
Posts: 164
Join Date: Aug, 2011
The regular cable supplied with it . I have asked to RCH ... because it a new unit and I don't want a cut or tweak it to operate it rt.. after all its a brand new unit I expect it to work like new  Smiley and more over these micro jst connector tors are very rare to get
Logged
thanks,
merin
 

Read
« Reply #30 on: July 26, 2016, 12:39:20 PM »
sandyx
Trucker
Plane Lover
Active Member

**

Reputation Power: 1 
sandyx has no influence.
Offline Offline

State: Kerala
RC Skills: Beginner
Posts: 88
Join Date: Jun, 2015
Cable issues are mostly user fixable unless ofcourse it's broken or crooked beyond hope. I wouldn't invoke warranty for such, but it's your choice. I think there will be access windows to all 4 pins on the connector itself. See if you can tap into it & get a direct feed on tv from cam. That will confirm the fault. If you're up to it, solder directly into cam pins if not planning to move it around much.
Logged
 

Read
« Reply #31 on: July 26, 2016, 12:46:23 PM »
SK1701
Heli Lover
Forum Hero

*****

Reputation Power: 11 
SK1701 has no influence.
Offline Offline

City: Montreal/ Bangalore
State: OUTSIDE INDIA
RC Skills: Intermediate
Posts: 888
Join Date: Oct, 2014

set acc_hardware = 1
This cable works with the HS1177: http://www.surveilzone.com/20cm-power-video-4pin-1.25mm-to-2.54mm-servo-fpv-cable-pa1214
Logged
www.facebook.com/FPVRacingBangalore/
 

Read
« Reply #32 on: July 26, 2016, 12:48:31 PM »
merin_83
Heli Lover
Senior Member
***

Reputation Power: 3 
merin_83 has no influence.
Offline Offline

City: Bangalore
State: Karnataka
RC Skills: Intermediate
Posts: 164
Join Date: Aug, 2011
Quote from: sandyx on July 26, 2016, 12:39:20 PM
Cable issues are mostly user fixable unless ofcourse it's broken or crooked beyond hope. I wouldn't invoke warranty for such, but it's your choice. I think there will be access windows to all 4 pins on the connector itself. See if you can tap into it & get a direct feed on tv from cam. That will confirm the fault. If you're up to it, solder directly into cam pins if not planning to move it around much.


Already did that and finally was able to see the video ...direct connection. .. and yes am not ready to open the case and solder Smiley ...
Logged
thanks,
merin
 

Read
« Reply #33 on: July 26, 2016, 12:49:28 PM »
merin_83
Heli Lover
Senior Member
***

Reputation Power: 3 
merin_83 has no influence.
Offline Offline

City: Bangalore
State: Karnataka
RC Skills: Intermediate
Posts: 164
Join Date: Aug, 2011
Thank you guys for all suggestion  was able to figure out the issue with your help !!
Logged
thanks,
merin
 

Read
« Reply #34 on: August 04, 2016, 12:45:05 AM »
merin_83
Heli Lover
Senior Member
***

Reputation Power: 3 
merin_83 has no influence.
Offline Offline

City: Bangalore
State: Karnataka
RC Skills: Intermediate
Posts: 164
Join Date: Aug, 2011
And today I got the replacements cables from RCH, and actually Kumaran sent me two .. WoW ... Thank you so much Kumaran/ RCH for your excellent support till resolution !!!    Hats Off
Logged
thanks,
merin
 

Pages: 1 [2]  All   Go Up
RC India  RC Models  Multirotors  Topic: No Video on FOXEER HS1177 - HELP Please
 « previous next »
Jump to:  

Related Topics
Subject Started by Replies Views Last post
FlyRC - Experience (RESOLVED BY SELLER)
RC Outlets and Resellers 		tango 16 9663 Last post May 06, 2011, 01:40:05 PM
by pvn2000
have a gap between pinion and spur gear. (RESOLVED)
Cars 		saurabh724 10 7885 Last post March 14, 2012, 10:42:24 PM
by iamahuman
Needed a Fpv camera foxeer monster v2 or v3 or any similar
Wanted 		Naughty 0 821 Last post July 15, 2017, 11:03:48 PM
by Naughty
Foxeer Legend 2 HD Cam
For Sale 		novas242001 0 775 Last post December 22, 2018, 10:59:36 AM
by novas242001
Foxeer Lollipop V2 SMA Antenna, Brand New - ₹1000
For Sale 		GlenRebello09 0 619 Last post June 18, 2019, 08:32:45 AM
by GlenRebello09
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Simple Audio Video Embedder 		Realized by Systalent | XHTML | CSS