|
Title: Prop selection help ! Post by: Dipanjan on September 26, 2016, 01:42:58 PM Hello RCI members,
I am building a micro quad. I have already bought Avionic 1818 3500KV motor from RCB. Also had bought some BullNose 3030 Propellers from Robu.in . The motors come with integrated prop savers. However after fixing the prop on the saver, as I increase throttle, initially there is a lot of vibration, and at some point the props came off the rubber band. I don't know which prop will be a good fit for the motor. Can someone please help me in this? Regards, Dipanjan edit: here is the motor link http://www.rcbazaar.com/product.aspx?productid=4084 Title: Re: Prop selection help ! Post by: Dipanjan on September 26, 2016, 02:03:49 PM OK, in the website, they have a chart using GWS 3 X 3. How can a GWS 3X3 fit on the motor?
Title: Re: Prop selection help ! Post by: Dipanjan on September 26, 2016, 07:18:42 PM This motor
http://www.hobbyking.com/hobbyking/store/__5380__C2020_Micro_brushless_Outrunner_3500kv_11g_.html Is similar to the one I have bought. Does anyone have any experience with these? What prop do you use? I right now have Kingkong 5030, and 3030 and 4045 BullNose props. Can't seem to get it working :( Have started to think I have bought a crap set of motors. :( Thought they would match the props listed at the website :( Please help ! Title: Re: Prop selection help ! Post by: prabal276 on September 27, 2016, 06:27:28 AM I have the same set of motors.I use one on my solar plane.
You won't be able to mount 3 blade props but 2 blade props shant be a problem. Can you post a pic. I'll be able to tell better. Title: Re: Prop selection help ! Post by: prabal276 on September 27, 2016, 06:29:18 AM And yes, I have run that motor on a 8x6 APC prop and it's well capable of that
Title: Re: Prop selection help ! Post by: Dipanjan on September 29, 2016, 11:35:14 AM Thanks a lot Prabal. I appreciate your concern :salute:
Well, I think I should rephrase my statement like: I have bought a good set of motors with a crap set of Prop savers. The rubber bands that came with the motors, couldn't keep the props in place, so I replaced them with ordinary rubber bands, and now the quad flies well. On a side note, I am using a Naze 32 FC, initially flashed it with Baseflight, was having strange stability issues. Now have reflashed it using Cleanflight, and it works very well. Probably I did some wrong setup in baseflight, that'w why it didn't work for me, but still, Cleanflight rocks :D Will post some pics and video later if possible :bow: Thanks again. Regards, Dipanjan Title: Re: Prop selection help ! Post by: EdallHobby on October 12, 2016, 11:16:01 AM All Variety of Propellers Starting from 3 inches to 12 inches at low price
http://www.edallhobby.com/en/44-propellers |