|
Title: Q680 V3 Quad-Copter Build................................... Post by: zalman15320011351 on March 23, 2016, 10:39:07 AM Hi Everyone,
I am starting this thread to inform all of you guys about my Quadcopter Build. I will be shortly posting pics. Any help is appreciated.I need all of you guy's help to finish my build. QUADCOPTER CONFIGURATION Q680 V3 Glass Fiber Quadcopter Frame 680mm - Integrated PCB Version Hobbyking KK2.1.5 Multi-rotor LCD Flight Control Board With 6050MPU And Atmel 644PA Turnigy MultiStar 2216-800KV 14-Pole Outrunner Motor Afro 20A ESC FlySky FS-TH9X-B 9CH Transmitter and 8CH Receiver with 2.4ghz Module Lightweight FPV Multifunction 200mm High Landing Gear Set for Multi-Rotors (Red/Black) Turnigy 2200mAh 3S 20C Lipo Pack Title: Re: Q680 V3 Quad-Copter Build................................... Post by: Balakrishna Reddy on March 23, 2016, 03:28:55 PM You need to go for a bigger battery around 3000mah with 30C would be better or any battery which is capable of supplying a minimum of 60A will do the job. But don't use 2200mah with 20C you may set your quad on fire. ;D ;D
Title: Re: Q680 V3 Quad-Copter Build................................... Post by: Aravind298 on April 24, 2016, 08:05:30 PM @zalman,where did u get those motors???
Need 4 of those urgently!!! Title: Re: Q680 V3 Quad-Copter Build................................... Post by: zalman15320011351 on April 24, 2016, 08:08:06 PM From Hobbyking warehouse.
It was a combo. Was US$120 when I purchased.Now it is US$86 http://www.hobbyking.com/hobbyking/store/__76073__MultiStar_Afro_Combo_Pack_2216_800KV_and_Matched_20A_Afro_ESC_Set_of_4_CW_CCW_AR_Warehouse_.html |