|
Title: Quad vibration problem Post by: devangflyer on August 03, 2014, 05:55:11 AM Hi guys , I have put a camera on my old f450 , to reduce the vibration , I have balanced the prop , put some foam underneath the camera , but still the image is horrible at 720p , because it vibrates so much , any tips ? :bow:
Title: Re: Quad vibration problem Post by: ashimda on August 03, 2014, 07:28:03 AM How are you attaching the camera?
Title: Re: Quad vibration problem Post by: devangflyer on August 03, 2014, 08:24:59 AM Like this :
Title: Re: Quad vibration problem Post by: ashimda on August 03, 2014, 08:54:38 AM Try to mount the cam with just Velcro. Don't tie it with rubber band. I used the rubber band and was getting vibs, with the cam just sitting on velcro eliminated vibrations. Try it.
Title: Re: Quad vibration problem Post by: devangflyer on August 03, 2014, 09:01:35 AM I'll try it , thanks
Title: Re: Quad vibration problem Post by: aravindrcquad on August 03, 2014, 09:17:26 AM stick the velcrow by using tape or any liquid ;)
look at my pic i did the same for my f450 frame Title: Re: Quad vibration problem Post by: linked on August 03, 2014, 09:42:16 AM May these images can help you. They are generally for flight controller mounting. But I hope you can use them as you camera mount.
You can do it yourself. First buy some vibration damping balls. I am new in this hobby. Many experienced people are here. They ll help you a lot. Title: Re: Quad vibration problem Post by: Jash Yang on August 06, 2014, 06:47:37 AM You can try the landing gear
Title: Re: Quad vibration problem Post by: chintal on August 06, 2014, 08:50:37 AM I have anti vibration mount for sale which will help u
Let me know if interested Title: Re: Quad vibration problem Post by: satyagupta on August 06, 2014, 09:26:08 AM The foam that you are using seems very hard. Try to use a lesser dense foam. Or you can use some rubbers, like bat grip. You would have some vibrations but you can start by reducing some.
Title: Re: Quad vibration problem Post by: devangflyer on August 06, 2014, 02:02:29 PM It's fine now , no need for replacement foam , but thanks for replying
Title: Re: Quad vibration problem Post by: madaquif on August 06, 2014, 04:28:26 PM what was the solution devang???
Title: Re: Quad vibration problem Post by: devangflyer on August 06, 2014, 04:32:54 PM All I did was that I removed the rubber bands
Title: Re: Quad vibration problem Post by: roshan.dixit on August 06, 2014, 06:38:54 PM Balance your props and get bAlanced motors, buy a anti vibration damper from RcMumbai.com or rcproduct.in I think quadkopter.com also has it check it out
Title: Re: Quad vibration problem Post by: devangflyer on August 06, 2014, 06:44:42 PM Why can't you get it , it's fine now
Title: Re: Quad vibration problem Post by: ashimda on August 06, 2014, 07:23:47 PM Your welcome.
|