|
Title: RCB6i remote controller calibration for quad Post by: jeet8066 on May 16, 2015, 10:34:48 PM I have select function 4 & mode 2 in RCB6i remote. but according to Hexa flight controller motors should be lock by full throttle down and rudder full left & for motors unlock full throttle down and rudder full right but it's not happen. when i put throttle down and alioron left then motors are unlock and full throttle down and aliron right then motor locked. also my quad not stable. kindly suggest me.
Title: Re: Post by: akhilzid on May 17, 2015, 01:10:39 AM Look like aileron and rudder connections are interchanged.
Title: Re: Post by: PiyushI on July 01, 2015, 10:44:05 PM Which FC board u r using? In my kk 5.5 board with stick centering fw (X config) I realised same problem, arming/unarming were changed to aileron chanel instead of rudder ch as manuals.
|