|
Title: RCelectro Fiber Glass Quad Frame Buildlog Post by: vksingh on June 01, 2012, 12:15:56 PM What the kit contains?
Square Aluminum Rods-4Nos. (https://lh4.googleusercontent.com/-kfa7aqJA90E/T8hXIU0qvpI/AAAAAAAADQA/HaEOtTahCL8/s400/Aluminum%2520Rods.jpg) Fiber Glass Parts (https://lh6.googleusercontent.com/-HUHgJyT_Ub4/T8hXIpYvBdI/AAAAAAAADQI/tWVXydOYvDY/s400/Glass%2520Fiber%2520Parts.jpg) Set of M3 Screws(M3x20 and M3x25mm), Nylock Nuts, washers and spacers (https://lh4.googleusercontent.com/-rCWNEFG8D8s/T8hXIon5SLI/AAAAAAAADQE/8cB_eY2t_zE/s400/Screws%2520%2526%2520Springs.jpg) Title: Re: RCelectro Fiber Glass Quad Frame Buildlog Post by: vksingh on June 01, 2012, 12:18:52 PM What tools we require?
1. Philips screw driver 2. A plier (https://lh3.googleusercontent.com/-uGupqsrMJwo/T8hn-3iDvZI/AAAAAAAADRA/1UWAVKkdg3Q/s400/IMG_20120601_115858.jpg) Title: Re: RCelectro Fiber Glass Quad Frame Buildlog Post by: vksingh on June 01, 2012, 12:23:58 PM Lets get started
1. We will fix the motor mount to our square aluminum rods. Take M3X20 screws 2Nos and fix the motor mount as shown. (https://lh6.googleusercontent.com/-af9ZauKFVms/T8howvKjIpI/AAAAAAAADRk/bmCCNMFC3qs/s400/IMG_20120601_115658.jpg) (https://lh3.googleusercontent.com/-3_1VYELi9S4/T8hpHI4W5FI/AAAAAAAADRk/gIppmpV291I/s400/IMG_20120601_123410.jpg) Title: Re: RCelectro Fiber Glass Quad Frame Buildlog Post by: vksingh on June 01, 2012, 12:45:56 PM 2. Now we will fix the legs with aluminum rod.
Take 2 legs (https://lh6.googleusercontent.com/-1ocb2CKfd_Y/T8hssW_AgZI/AAAAAAAADSo/ubd7svKhuFg/s400/IMG_20120601_123805.jpg) Fix them as shown. (https://lh5.googleusercontent.com/-Gm0ORTEdJvE/T8huBp0uX7I/AAAAAAAADTM/-XL2Bh_q7ek/s400/IMG_20120601_124244.jpg) (https://lh6.googleusercontent.com/-3-vD8384w7A/T8huBxWipeI/AAAAAAAADTM/moW4gPJANeo/s400/IMG_20120601_124255.jpg) Fix the spacer at bottom hole of the leg. (https://lh5.googleusercontent.com/-khLrqpP1SgA/T8huB0jFrLI/AAAAAAAADTM/We1nSEG_Kgg/s400/IMG_20120601_124454.jpg) Fix the spring in the top hole. (https://lh3.googleusercontent.com/-kmCOFz4hXkg/T8hsv-ELHII/AAAAAAAADSo/lr2VXUZYHDg/s400/IMG_20120601_124542.jpg) (https://lh5.googleusercontent.com/-PeS9ieOD8pg/T8hstJnczOI/AAAAAAAADSo/1WSa1bhweio/s400/IMG_20120601_124744.jpg) Note the position of the screw for the spring. (https://lh5.googleusercontent.com/-siTR576voww/T8hsw6txYKI/AAAAAAAADSo/5I7ChuXr_Us/s400/IMG_20120601_124808.jpg) Prepair all the four legs like above. Title: Re: RCelectro Fiber Glass Quad Frame Buildlog Post by: vksingh on June 01, 2012, 12:50:52 PM A step missed
Fix another spacer as shown above the spring and prepair all the four legs. (https://lh4.googleusercontent.com/-sL1UEnlJ0zs/T8hvY85AQ4I/AAAAAAAADTg/cGPQCaz_Je0/s400/IMG_20120601_130040.jpg) Title: Re: RCelectro Fiber Glass Quad Frame Buildlog Post by: vksingh on June 01, 2012, 12:59:05 PM 3. All 4 legs ready
(https://lh4.googleusercontent.com/-sdMjWwfxee8/T8hxTQIKIsI/AAAAAAAADT0/KYYmP4WqykU/s400/IMG_20120601_130826.jpg) Title: Re: RCelectro Fiber Glass Quad Frame Buildlog Post by: vksingh on June 01, 2012, 01:17:10 PM 4. Now we will fix the legs to our bottom and top plates.
From bottom to top the arrangment of the plates will be like this (https://lh6.googleusercontent.com/--4z3RoslFCo/T8hzPVFo54I/AAAAAAAADUk/b1vHSqFfW1U/s400/IMG_20120601_131349.jpg) Take 2 Nos M3X25 Screws. and fix the legs as shown. (https://lh3.googleusercontent.com/-bLg-qX2G1o0/T8hzPR6hwoI/AAAAAAAADUk/SnWbzXGL9WM/s400/IMG_20120601_131522.jpg) (https://lh5.googleusercontent.com/-0fGIyLAs5GI/T8hzPrBSMYI/AAAAAAAADUk/CpjbVnzrgQk/s400/IMG_20120601_131527.jpg) (https://lh6.googleusercontent.com/-wgqk-Gf4jWo/T8hzSEMFffI/AAAAAAAADUk/gnWo4EsRoT8/s400/IMG_20120601_131554.jpg) (https://lh6.googleusercontent.com/-VFmo42snlZg/T8hzSkYDG1I/AAAAAAAADUk/XJK8hkzfJsY/s400/IMG_20120601_131630.jpg) Now place the bottom plate and fasten the screws. (https://lh3.googleusercontent.com/-PjEQXsBtxXA/T8h1Bb3RklI/AAAAAAAADVQ/gjDIAOgy7XM/s400/IMG_20120601_132039.jpg) (https://lh6.googleusercontent.com/-DEcBObs7CHU/T8h1M08OfoI/AAAAAAAADVQ/GEcxpQWbsVs/s400/IMG_20120601_132242.jpg) (https://lh6.googleusercontent.com/-NnnTQcUCPS4/T8h1Mzjes0I/AAAAAAAADVQ/JPTMucYFviw/s400/IMG_20120601_132252.jpg) Title: Re: RCelectro Fiber Glass Quad Frame Buildlog Post by: vksingh on June 01, 2012, 01:33:13 PM 5. Now its time to assemble the rest of the legs.
(https://lh4.googleusercontent.com/-szVSi9EqZ3Y/T8h4kvsl_8I/AAAAAAAADVw/PAwhIHPYCuw/s400/IMG_20120601_133534.jpg) (https://lh4.googleusercontent.com/-9uyxwq9eliA/T8h4kngBucI/AAAAAAAADVw/s-cs_yxSdXA/s400/IMG_20120601_133849.jpg) (https://lh3.googleusercontent.com/-Ts576YPY0OY/T8h47KFu2tI/AAAAAAAADWE/hZl5ZUALHhA/s400/DSC08354.jpg) You can fold this frame like this for easy transportation. (https://lh6.googleusercontent.com/-np_F0FIkUNA/T8h4z4lGK_I/AAAAAAAADVw/HggRAuDC5zs/s400/DSC08351.JPG) Wow our frame is ready... {:)} {:)} {:)} Enjoy Title: Re: RCelectro Fiber Glass Quad Frame Buildlog Post by: vksingh on June 01, 2012, 01:36:06 PM Weight of the frame is approx 325gms.
Recommended Motors. (https://lh6.googleusercontent.com/-NisjZLiFjeI/T8h6Djs3RII/AAAAAAAADWc/DE0nS6AyDkU/s400/D2836-11750.gif) Turnigy D2836/11 750KV Brushless Outrunner Motor Spec. Battery: 2~3 Cell /7.4~11.1V RPM: 750kv Max current: 14A No load current: 0.8A Max power: 210W Internal resistance: 0.160 ohm Weight: 71g (including connectors) Diameter of shaft: 4mm Dimensions: 28x36m Prop size: 7.4V/12x6 11.1V/9x6 Max thrust: 800g Title: Re: RCelectro Fiber Glass Quad Frame Buildlog Post by: vksingh on June 01, 2012, 01:42:13 PM The center to center of the motor shaft is 600mm.
At present 10 frames are available. If you want one of the frame please mail me at vivek@rcelectro.com The Price of the frame is 1500/- including shipping. Thanks every one for watching this buildlog. Your valuable comments are awaited... Title: Re: RCelectro Fiber Glass Quad Frame Buildlog Post by: faisal00813 on June 01, 2012, 03:29:29 PM Is that frame tested...?
I have 3530 1400kv motors...can this frame handle that power and weight.? And what about tough and hard landings.....any info on that. Thanx....btw gr8 work :hatsoff: Title: Re: RCelectro Fiber Glass Quad Frame Buildlog Post by: vksingh on June 01, 2012, 03:58:38 PM Yes that frame has been tested.
and yes it can handle your hard landings and the motor. Title: Re: RCelectro Fiber Glass Quad Frame Buildlog Post by: Dharmik on June 01, 2012, 04:43:04 PM Very nice frame and build log. The spring concept is new and good, it will easily withstand hard touchdowns.
Title: Re: RCelectro Fiber Glass Quad Frame Buildlog Post by: satyagupta on June 01, 2012, 05:06:42 PM vivek ji where did you get glass fiber plates from?? any links?? can you get some for me too if i ask please...
Title: Re: RCelectro Fiber Glass Quad Frame Buildlog Post by: anwarulhaq on June 01, 2012, 07:51:27 PM VK
Avery good design and product. Hope you will be able to supply any spares that may be required in future. All the best. Anwar ul Haq Title: Re: RCelectro Fiber Glass Quad Frame Buildlog Post by: vksingh on June 01, 2012, 08:01:00 PM Yes i will be able to supply the spares. Will be bringing out more frames in future.
Thanks Title: Re: RCelectro Fiber Glass Quad Frame Buildlog Post by: vksingh on June 01, 2012, 08:02:34 PM Actually this design has been copied from the frames on ebay and other Chinese sites. Thanks to them
Title: Re: RCelectro Fiber Glass Quad Frame Buildlog Post by: SunLikeStar on June 01, 2012, 09:45:35 PM I've seen a similar design frame at a friends place, which he has bought from china. But it didn't had the spring landing gear. Overall this frame looks much better than the chinese one. Good job once again {:)}
Title: Re: RCelectro Fiber Glass Quad Frame Buildlog Post by: Dharmik on June 01, 2012, 09:53:11 PM Yeah this frame looks like famous x525 frame especially landing skid but spring concept is innovative.
Title: Re: RCelectro Fiber Glass Quad Frame Buildlog Post by: saurabhreigns on June 01, 2012, 11:53:46 PM great work sir,
by the way, where are u these days ? i got stuck in a very bad situation ,i tried to contact u but u were nowhere..:-( anyway, the gud news is that i have submitted my hovercraft in the college with no issues encountered...ALL WENT FINE,,,it was working(however the vertical fan could not work as the IC we used to control it ie.l293d god BURNT....:(...)...still m happy wt i got.;)...thanks fr ur kind help... sms me wenever u get back to ghaziabad. Title: Re: RCelectro Fiber Glass Quad Frame Buildlog Post by: faisal00813 on June 05, 2012, 06:49:14 PM how can i mount this motor onto the frame? :headscratch: :headscratch: :headscratch:(http://)
Title: Re: RCelectro Fiber Glass Quad Frame Buildlog Post by: satyagupta on June 05, 2012, 08:28:20 PM you have to mount this upside down. Means the shaft side of the motor needs to be mounted below the motor mount.
Title: Re: RCelectro Fiber Glass Quad Frame Buildlog Post by: faisal00813 on June 06, 2012, 04:13:52 AM But there are landing gears there in this frame....how can I put it there?
Title: Re: RCelectro Fiber Glass Quad Frame Buildlog Post by: satyagupta on June 06, 2012, 08:38:43 AM Just take the measurement is the motor wider that the space between the stands.. Or else you can mount it upside down on top but you have buy another prop mount i dont know the name i will try to post a link of the same.
|