Title: Scratchbuilt Quad Post by: yashodhanp on December 05, 2013, 09:03:48 PM So I decided to make a large quad ;D (550mm MtM)D
Got the centre plates laser cut in MDF Arms used were 1/2" (12.7mm) aluminium square tubing. Centre plates (2.5mm MDF) (http://s6.postimg.org/cc2n4dmxt/image.jpg) Temporarily assembled together (double sided tape ;D) (http://s6.postimg.org/j196ke89t/image.jpg) Another view (http://s6.postimg.org/jpi13c6zl/image.jpg) What's left. 1. Drilling holes through the aluminium tubes for the screws 2. Adding the 3rd centre plate to guard the control board. Specs: MtM:550mm Frame weight: 175gms Setup I have chosen 1. 4x E-Max CF2812 Motors 2. HobbyWing Quattro (20A) 3. KK Multi V5.5 4. Battery to be decided later ??? Any changes to the above setup welcome :) Title: Re: Scratchbuilt Quad Post by: chindichor on December 05, 2013, 10:27:30 PM It looks pretty cool. Please keep posted with as much details, photos and videos. I am a n00b, I want to follow the process.
Title: Re: Scratchbuilt Quad Post by: yashodhanp on December 06, 2013, 11:47:39 AM sure . will keep you posted :D
Title: Re: Scratchbuilt Quad Post by: sajid6300shaikh on December 06, 2013, 02:41:41 PM From where did you get it laser cut.?
|