Here are the rest of the pics, to see the original picture please right click on the image and open in new tab
(Images are big so if you have a slow connection please only view what you would really like to see in higher res)
ST3EALTH tricopter V1 Build
ST3EALTH tricopter V1 Build
Ready for paint, chose a Flat black paint.
ST3EALTH tricopter V1 Build
ST3EALTH tricopter V1 Build
Drying off, sprayed the kk mini case too.
ST3EALTH tricopter V1 Build
ST3EALTH tricopter V1 Build
Test Fitting the components.
ST3EALTH tricopter V1 Build
Frame plates ready to be assembled
ST3EALTH tricopter V1 Build
SunnySky X2212 with wires braided and covered with mesh
ST3EALTH tricopter V1 Build
All components used in the build
ST3EALTH tricopter V1 Build
ST3EALTH tricopter V1 Build
1250MG servo
ST3EALTH tricopter V1 Build
Screws and PDB
ST3EALTH tricopter V1 Build
ST3EALTH tricopter V1 Build
KK Mini with buzzer
ST3EALTH tricopter V1 Build
3A UBEC
ST3EALTH tricopter V1 Build
XRotor 20A ESC
ST3EALTH tricopter V1 Build
ST3EALTH tricopter V1 Build
Components of the frame.
ST3EALTH tricopter V1 Build
ST3EALTH tricopter V1 Build
Props
ST3EALTH tricopter V1 Build
ST3EALTH tricopter V1 Build
Receiver.
ST3EALTH tricopter V1 Build
Battery strap and Motor mounts
ST3EALTH tricopter V1 Build
ST3EALTH tricopter V1 Build
Tilt Mechanism(rcexplorer style)
ST3EALTH tricopter V1 Build
Servos for Super Simple Gimbal
ST3EALTH tricopter V1 Build
Landing Gear and SSG Plate
ST3EALTH tricopter V1 Build
ST3EALTH tricopter V1 Build
ST3EALTH tricopter V1 Build
ST3EALTH tricopter V1 Build
ESC's soldered with new wires, to maintain the all black look have used only black wires.
ST3EALTH tricopter V1 Build
ST3EALTH tricopter V1 Build
ST3EALTH tricopter V1 Build
ST3EALTH tricopter V1 Build
All components soldered to PDB
ST3EALTH tricopter V1 Build
Battery Cable
ST3EALTH tricopter V1 Build
ST3EALTH tricopter V1 Build
ST3EALTH tricopter V1 Build
ST3EALTH tricopter V1 Build
ST3EALTH tricopter V1 Build
Motors Mounted to arms(Note the vinyl covered silicon tube used to prevent zip ties from biting too deep into the booms)
ST3EALTH tricopter V1 Build
Final assembly
ST3EALTH tricopter V1 Build
ST3EALTH tricopter V1 Build
ST3EALTH tricopter V1 Build
ST3EALTH tricopter V1 Build
ST3EALTH tricopter V1 Build
Maidened