Hello all,
I recently made an hexacopter with tons of components. The components are:
1) H550 hexacopter frame
2) Pixhawk flight controller
3) 2 x 5200mah 4s Multistar Low discharge Multirotor batteries = 10.4 Ah 4s
4) QK 1250mah 3s for lights, light strips, gimbal, vtx.
5) XRotor 20 A ESCs high timing
6) X8R receiver with 433mhz telemetry
7) Walera G-3D gimbal with Xiaomi Yi action cam, also used for FPV with minim osd.. With 32ch mini 5.8GHz vtx...
Sunnysky x2212 980kv motors with 9045 HQ props
The problem is I planned the weight to be around 2.2kg at max. But it went 2.7kg and for my further project I am sure it will reach 3kg. Right now I am using Sunnysky x2212 980kv motors with HQ 9045 propellers. The motors are pretty good to generate that amount of thrust but they are getting much load and getting hot just after around 7-8 minutes of flying. I know the built is so badass for that motors so for safety I decided to get new motors but I am confused which will be best for me. I don't want any motor get burnt in flying and get whole multi kiss the ground immediately.
I can use 10 inch props with my setup, and PS battery setup is way big and I know that. Any suggestions are always welcome.
Please recommend me best motors for my built that will not get hot even after 30 mins of flying (if it delivers such flying time).
I appreciate each your replies.
Thank you
Regards
Durgesh