RC India

RC Models => Multirotors => Topic started by: Shyam Hembram on July 07, 2015, 07:28:33 PM



Title: suitable props for 810kv 2216 emax motors 3s setup???
Post by: Shyam Hembram on July 07, 2015, 07:28:33 PM
hi folks
i cant decide which prop size should i use.i was thinking of 12*4.5inch on 810kv 2216 motors for max power on 3s setup 4200mah,25 amp esc,i hope it can handle the heat,and one more choice i have is 11*4.7 :headscratch:
i tried googling but not so usefull


Title: Re: suitable props for 810kv 2216 emax motors 3s setup???
Post by: Darshan for multirotors on July 07, 2015, 07:39:16 PM
I have seen people use 10*5 props .. I think that gives max thrust
I think Don't go beyond 11*5 props.. That would just be extra useless amps drawn..
Best of luck :thumbsup:


Title: Re: suitable props for 810kv 2216 emax motors 3s setup???
Post by: Shyam Hembram on July 07, 2015, 08:37:07 PM
10*5inch prop is good for 4s setup. but not efficeint for 3s ...i think 11 or 12 inch would be good.


Title: Re: suitable props for 810kv 2216 emax motors 3s setup???
Post by: Darshan for multirotors on July 07, 2015, 08:42:46 PM
Well you can try 12inch but 11 ones would surely work according to me


Title: Re: suitable props for 810kv 2216 emax motors 3s setup???
Post by: K K Iyer on July 07, 2015, 09:32:09 PM
@shyam hembram,
10x4.5 for 3s. Over 800gms thrust.
See this review:
http://www.flitetest.com/articles/best-450-size-quad-motor


Title: Re: suitable props for 810kv 2216 emax motors 3s setup???
Post by: sultan alam on July 08, 2015, 04:22:30 AM
I have used this motor in my quad ,it can give around 800 gm thrust with 10*4.5 setup,still using this setup with dozens of happy flying and draws current max 11-12 amp
And with 11*4.7 setup extra 50 gm of thrust with 14 amp of current draw and yes no doubt mine get heat.Hope this will helpful


Title: Re:
Post by: Shyam Hembram on July 08, 2015, 12:25:46 PM
Thanks @Sultan sir and @Iyer sir