Title: Tarot TL250A Full Carbon Fiber - General Discussion Post by: foxrc on March 13, 2015, 07:23:03 PM Note : This thread is intended to be a general discussion of the following chassis and as a place for discussing features or issues regarding the same.
Tarot TL250A (http://img.tarot-rc.com/TL250A.jpg) (http://img.tarot-rc.com/TL250A-1.jpg) (http://img.tarot-rc.com/TL250A-4.jpg) Parameters of the tarot 250A: Wheelbase: 250MM Empty rack height / assembly height: 43MM / 85.8MM Empty frame length / assembly Length: 195MM / 288MM Empty frame width / assembly width: 219MM / 315MM Bottom headroom: 21.8MM Empty weight / takeoff weight: 115G / 430G (including 2200MHA battery) It even comes with landing skid. Ongoing discussion at the following forum - http://www.rcgroups.com/forums/showthread.php?t=2298606 (http://www.rcgroups.com/forums/showthread.php?t=2298606) Title: Re: Tarot TL250A Full Carbon Fiber - General Discussion Post by: foxrc on March 13, 2015, 07:51:55 PM Please share your flying experience, FPV Videos and other mods for this frame.
Title: Re: Tarot TL250A Full Carbon Fiber - General Discussion Post by: sanjiv1994 on March 13, 2015, 08:10:39 PM Here is my build for tarot TL250A
Full Carbon Fibre Frame with landing Skids Flip 32 plus Diatone 5030 props DYS 2300KV Black Edition Sunrise blheli slim esc 20A Diy BEC 200 mw skyzone FPV 2200 mah wolf pack Lipo 25C AUW - 415g Stock landing gears are not up to the mark,broken down into two pieces after my first crash landing. Made my own landing gears using shockers. Very stable and light.Flight time around 10mins on 1500 mah 25C wildscorpion Best thing is PDB.No wires visible at all soldered directly to FC and PDB. Title: Re: Tarot TL250A Full Carbon Fiber - General Discussion Post by: sanjiv1994 on March 13, 2015, 08:12:02 PM Here are my pics..
http://static.rcgroups.net/forums/attachments/5/6/9/0/1/4/a7656028-183-ImageUploadedByTapatalk1426014235.746345.jpg (http://static.rcgroups.net/forums/attachments/5/6/9/0/1/4/a7656028-183-ImageUploadedByTapatalk1426014235.746345.jpg) http://static.rcgroups.net/forums/attachments/5/6/9/0/1/4/a7656029-48-ImageUploadedByTapatalk1426014257.965774.jpg (http://static.rcgroups.net/forums/attachments/5/6/9/0/1/4/a7656029-48-ImageUploadedByTapatalk1426014257.965774.jpg) http://static.rcgroups.net/forums/attachments/5/6/9/0/1/4/a7656030-179-ImageUploadedByTapatalk1426014298.796296.jpg (http://static.rcgroups.net/forums/attachments/5/6/9/0/1/4/a7656030-179-ImageUploadedByTapatalk1426014298.796296.jpg) http://static.rcgroups.net/forums/attachments/5/6/9/0/1/4/a7656032-213-ImageUploadedByTapatalk1426014318.620360.jpg (http://static.rcgroups.net/forums/attachments/5/6/9/0/1/4/a7656032-213-ImageUploadedByTapatalk1426014318.620360.jpg) http://static.rcgroups.net/forums/attachments/5/6/9/0/1/4/a7656034-92-ImageUploadedByTapatalk1426014340.384873.jpg (http://static.rcgroups.net/forums/attachments/5/6/9/0/1/4/a7656034-92-ImageUploadedByTapatalk1426014340.384873.jpg) Title: Re: Tarot TL250A Full Carbon Fiber - General Discussion Post by: pravesh736 on March 13, 2015, 08:44:54 PM Sanjiv94 and foxrc same?
If it's with lipo, ur auw at 415 is very light, good job. Title: Re: Tarot TL250A Full Carbon Fiber - General Discussion Post by: foxrc on March 13, 2015, 09:36:09 PM foxRC has three admins Sanjiv ,Pushpreet and Abhishek.AUW including Lipo 1500mah is 415 .Very light and agile copter
|