RC India

RC Models => Multirotors => Topic started by: akhilzid on March 06, 2016, 09:34:03 AM



Title: TBS Disco 3 Axis Gimbal mount, Simple and effective Idea
Post by: akhilzid on March 06, 2016, 09:34:03 AM
No description is needed and the images are enough to explain the idea.

No need to 3D print, no hole in pockets.

Just two dji landing gears and some zipties.

Have a look at the pictures


Title: Re: TBS Disco 3 Axis Gimbal mount, Simple and effective Idea
Post by: ashimda on March 06, 2016, 10:32:30 AM
Now that's what I call some effective jugaad. Only problem I see is that, there's alot of weight upfront, with the landing gear and the gimbal extended so far forward.
Battery placement may be an issue to get the CG right. Considering you are using a 3 axis gimbal, brilliant work around.
Here's my solution for FFG for the Disco, albeit 2 axis. 


Title: Re:
Post by: a3ruz on March 06, 2016, 05:05:32 PM
For @akhilzid Landing gears are not for landing purpose they are used  as GPS stands , gimbal mount etc ...
: kudos :