|
Title: Transmitter and Receiver not working Post by: Ghulam Askari on August 11, 2016, 01:11:31 PM Hello everyone
I have fs-i6 transmitter and receiver And have a CC3D flight controller I have a problem connecting my receiver with the transmitter as it is not displaying the receiver voltage on the transmitter display.. It would be really helpful if you can guide me.. Title: Re: Transmitter and Receiver not working Post by: Balakrishna Reddy on August 12, 2016, 12:27:59 AM What receiver you have. I think its not i6B receiver.
Title: Re: Transmitter and Receiver not working Post by: Ghulam Askari on August 12, 2016, 02:03:09 PM Actually the transmitter and the receiver were working fine bofore
The problem arised after some usage of my CC3D so I even changed my flight controller the problem was the same my transmitter was not receiving signals from my receiver.. Title: Re: Post by: a3ruz on August 12, 2016, 10:08:57 PM Any indications in the rx , while tx on or off
Title: Re: Transmitter and Receiver not working Post by: Ghulam Askari on August 12, 2016, 10:11:51 PM Yes I do have indications
When I connect battery with my rx and simultaneously when the tx is off the rx blinks After that when I switch on my tx my rx gives a constant light which clearly means that it's connected still it doesn't show up on my tx Title: Re: Transmitter and Receiver not working Post by: Ghulam Askari on August 13, 2016, 09:50:15 PM What if I purchase a new receiver of the same tx model
Title: Re: Transmitter and Receiver not working Post by: Balakrishna Reddy on August 14, 2016, 03:05:55 PM It would be better idea to buy a new receiver. If still it doesn't work then problem is with transmitter antenna. If it worked then it would be receiver antenna problem.
Title: Re: Transmitter and Receiver not working Post by: Ghulam Askari on August 14, 2016, 10:25:02 PM Okay I'll order a new one..
Thanks a lot |