Hi guys,
I finished calibrating my escs and tested them for synchronization to see if all the motors start at the same time when the throttle stick is moved up.Everything seemed fine and when i disconnected and reconnected my battery 3 of my escs smoked !!
My build
NTM series motors 35-30 1100kv/380w
zippy flightmax battery 3000mah 3s 40c
Turnigy AE-25 A ESCS
Crius Multiwii se 2.0 Flight controller
10X4.5 inch prop
my motors draw about 18A for the above props ...there was no short circuit of ne sort all the wiring is neatly done plus i had been testing calibrating my ESCs since a months time cant figure out wat happened to it all of a sudden