i want to build a quadcopter and put a camera for capturing photos and videos.
i did some small research and finalised my parts list. here is the list that i finalised
Frame:
1/2" width, 1mm thick, 30" long square aluminium hollow rod- 1 (60g)
1/2" width, 1mm thick, 14.5" long square aluminium hollow rod- 2 (30g each)
7.77" square plywood plate- 2 (100g each)
net frame mass is 320g
electronics:
Emax MT2213 brushless motors-4
Hobbywing Skywalker Quattro 25Ax4 UBEC Brushless ESC
Hobbyking KK2.0 Multi-rotor LCD Flight Control Board
Turnigy nano-tech 2650mah 3S 25~50C Lipo Pack
Turnigy 9X 9Ch Transmitter w/ Module & 8ch Receiver (Mode 2) (v2 Firmware)
i ll be building the camera mount latter. But first i wanted my quadcopter to fly so that i can learn how to control it.