RC India
Welcome Guest, please login or register.
 
Pages: [1]   Go Down
0 Members and 1 Guest are viewing this topic. Topic Tools Topic Tools 
Read
« on: December 14, 2013, 01:33:47 AM »
corsair24
Heli Lover
Active Member
**

Reputation Power: 1 
corsair24 has no influence.
Offline Offline

City: Bangalore
State: Karnataka
RC Skills: Intermediate
Posts: 11
Join Date: Dec, 2013




Hello,

After arming, when giving throttle to the system, the quad spins on the ground. Unable to take off from the ground, instead its rotation in CCW direction.

We verified all motor connection, Props direction and mounting, Throttle range calibration is OK., ESC calibrating perfectly in a normal way.

My specs :

1. DYS 20Amp ESC

2. KK 2.1 FLight controller with LCD

3. DYS motors with 1000KV, 150W

4. HK Transmitter & Rx, T6A V2 :
http://www.hobbyking.com/hobbyking/s...2_mode_2_.html

5. Nano Tech Lipo 4s, 4500maH, 35C. Also tried with Nano Tech Lipo 3S, 2200maH, 25C.

6. Config - in "+" and "X" mode

This is the youtube link of this observation (Sorry, for poor Quality) :

http://www.youtube.com/watch?v=MIOWcp8RDBA&feature=youtu.be

What can be the reason for this Huh?
Logged
 

Read
« Reply #1 on: December 14, 2013, 01:42:06 AM »
prateek13
FPV Mission Man
Plane Lover
Forum Hero

*****

Reputation Power: 14 
prateek13 has no influence.
Offline Offline

City: Dona Paula, Panaji
State: Goa
RC Skills: Intermediate
Posts: 1099
Join Date: May, 2010



The video is private! Please list it as unlisted or public.
Logged

Award | OFNA Nexx8 | Art-Tech Edge 540T | Glidiator V2 | Hawker Tempest | Cessna Citation Jet
Turnigy 9X
FPV Platforms : CF Tricopter| HK EPP FPV | Bixler 1 | Bixler 2 | DJI Phantom 2 +H3 3D
 

Read
« Reply #2 on: December 14, 2013, 01:51:51 AM »
corsair24
Heli Lover
Active Member
**

Reputation Power: 1 
corsair24 has no influence.
Offline Offline

City: Bangalore
State: Karnataka
RC Skills: Intermediate
Posts: 11
Join Date: Dec, 2013



Pls try it now....
Logged
 

Read
« Reply #3 on: December 14, 2013, 08:37:22 AM »
santhosh
Heli Lover
Forum Hero
*****

Reputation Power: 7 
santhosh has no influence.
Offline Offline

City: thrissur
State: Kerala
RC Skills: Beginner
Posts: 507
Join Date: Mar, 2009



 i think the  the propellors are connected in the wrong way,the same type of props (cw, ccw) should be connected
opposite to each other.pls refer kk2.0 manual for a clear picture
Logged
 

Read
« Reply #4 on: December 14, 2013, 09:29:48 AM »
KT
Plane Lover
Active Member
**

Reputation Power: 1 
KT has no influence.
Offline Offline

City: Bangalore
State: Karnataka
RC Skills: Beginner
Posts: 5
Join Date: Nov, 2011



I coluld see that the props are fixed properly, may be d rudder  gyro is damaged, even it had happened to me after the crash
Logged
 

Read
« Reply #5 on: December 14, 2013, 09:33:39 AM »
santhosh
Heli Lover
Forum Hero
*****

Reputation Power: 7 
santhosh has no influence.
Offline Offline

City: thrissur
State: Kerala
RC Skills: Beginner
Posts: 507
Join Date: Mar, 2009



Watched the video carefully ,the props are connected in
The right way
Logged
 

Read
« Reply #6 on: December 14, 2013, 10:12:32 AM »
utkarshg13
Plane Lover
Forum Hero

*****

Reputation Power: 11 
utkarshg13 has no influence.
Offline Offline

City: Bangalore
State: Karnataka
RC Skills: Intermediate
Posts: 982
Join Date: Jul, 2013



It seems that the yaw(rudder) gyro has to be checked once again.
Logged

"If you were born with wings, do every thing you could, for flying."
 

Read
« Reply #7 on: December 18, 2013, 03:52:33 AM »
corsair24
Heli Lover
Active Member
**

Reputation Power: 1 
corsair24 has no influence.
Offline Offline

City: Bangalore
State: Karnataka
RC Skills: Intermediate
Posts: 11
Join Date: Dec, 2013



 What has to be checked in Yaw Gyro settings ? Can transmitter be problem for this issue ?

Check this,  

By adjusting roll trims, I was able to reduce the rotation Rate... But the still the problem exists ..
Logged
 

Read
« Reply #8 on: December 18, 2013, 07:08:25 AM »
Dharmik
Heli Lover
Forum Hero

*****

Reputation Power: 13 
Dharmik has no influence.
Offline Offline

City: Bharuch
State: Gujarat
RC Skills: Beginner
Posts: 1097
Join Date: Sep, 2011



There are so many check points involved in multirotor.
1. first make sure props rotation is correct as per kk2 configuration.
2. check receiver test and make sure all are correct and shows zero.
3. calibrate escs individual and then together with board.
4. make sure board mounted properly and leveled with the frame.
5. perform sensor test and calibrate them.
it might help you.
EDIT
also check that arms are not twisted.
Logged
 

Read
« Reply #9 on: December 18, 2013, 04:40:15 PM »
anwar
Administrator
Forum Hero

*****

Reputation Power: 141 
anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!
Offline Offline

City: Doha (Qatar) & Thrissur
State: Kerala
RC Skills: Advanced
Posts: 11619
Join Date: Mar, 2009

RC India - Flying and racing with open minds !



One I spent a lot of time on once by mistake... make sure your ESCs/motors are connected to the controller in the right order, as per the configuration selected on the board.

For example, if motor connection 1 on the controller is supposed to go to the front right motor, make sure it goes there !
Logged

Hangar : Please see my introduction.
RC India forum and me : About this forum.
 

Read
« Reply #10 on: December 18, 2013, 07:57:09 PM »
corsair24
Heli Lover
Active Member
**

Reputation Power: 1 
corsair24 has no influence.
Offline Offline

City: Bangalore
State: Karnataka
RC Skills: Intermediate
Posts: 11
Join Date: Dec, 2013



Hello all,

I checked with all basic possible errors like Motor spinning, correct prop direction, wiring connection. Everything was perfectly OK. But the problem still existed.

Then I re flashed the firmware and placed the FC board using studds(Before it was hosted inside the foam). Suprisingly the spin was reduced on the ground rather it started lifting up slightly. I was feeling like  Vehicle is crawling like baby. It lifted off around half feet to 5 feet in different sorties(was airborne only for 3-4secs). But it was PITCHING forward along with yawing effect. It was jumping  Smiley I dono Know how to call it. The vehicle started to lift off only after giving throttle of more than 40% along with triming the throttle slowly.

Sometimes I feel that TX which im using might be too heavy for this board (HK Transmitter & Rx, T6A V2 ) http://www.hobbyking.com/hobbyking/s...2_mode_2_.html

Pls check the link for below  observation :



What might be the reasons for this Smiley Once again thank you very much.
Logged
 

Pages: [1]   Go Up
Jump to:  

Related Topics
Subject Started by Replies Views Last post
Hpi Baja 5t spinning in slo-mo
Cars
rockypro1 3 5008 Last post July 06, 2011, 04:08:28 PM
by rockypro1
QUADCOPTER MOTORS SPINNING UNEVENLY
Multirotors
harsha 7 7474 Last post December 15, 2012, 03:53:57 PM
by harsha
Motors not spinning at the same speed
Multirotors
Darshan for multirotors 12 7269 Last post May 25, 2015, 05:13:44 PM
by Darshan for multirotors
Quad couldn't lift off the ground « 1 2  All »
Beginners Zone
payamrastogi 43 18410 Last post June 01, 2017, 01:08:27 PM
by kdarshit
My Self-assembled Quad copter. Unable to fly due to unstability
Beginners Zone
NILADRI 18 5199 Last post July 11, 2018, 11:53:23 AM
by rufussam