|
Title: which esc should i use? Post by: profoundr on April 25, 2013, 12:15:00 AM which esc should i use for AEW 2822 Brushless Motor 1100KV
http://aeroworks.co.in/store/index.php?id_product=332&controller=product i am bit confused because its max amps is 9.9a but the site is saying recommended esc is 30a ??? Title: Re: which esc should i use? Post by: Salam on April 25, 2013, 01:06:06 AM A 15-20A ESC should be good for it. A little extra headroom is always good which is required to protect against burst rate and amp spikes which will keep the ESC cooler. A bigger ESC is not going to hurt unless you are concerned about the extra weight of a bigger ESC. Price difference should not be much.
Title: Re: which esc should i use? Post by: arun.sreelakam on April 25, 2013, 06:38:59 AM Agree with Mr.Salam, As the max A rating is 9.9 and the W is 102...
you can go with a 18A esc with 3s will be safe.... :) Title: Re: which esc should i use? Post by: anandp on April 25, 2013, 08:23:23 AM check this - http://www.rcelectro.com/rc-products/esc/hobbyking-red-brick-20A-ESC
Title: Re: which esc should i use? Post by: lastRites on April 25, 2013, 09:24:27 AM If this is for a multirotor, I do not recommend that Red Bricks. Go fo the Hobbyking F range of escs like th F-20A :
http://www.quadkopters.com/product/hobby-king-20a-esc-3a-ubec/ Title: Re: Re: which esc should i use? Post by: arun.sreelakam on April 25, 2013, 10:09:55 AM For this motor... 20A red brick is perfect for mutirotors also in my view.. with basic program features and affordable...
Sent from my Canvas using tapatalk 2 Title: Re: which esc should i use? Post by: profoundr on April 25, 2013, 01:51:24 PM can any one suggest me which size props should i use for the motor :-\
|