|
Title: Avionic 7c Rx tx help Post by: arun21 on November 23, 2014, 07:46:18 PM Can someone post reciever wiring diagram , i am using from a a week now and wonder what " BATT" is connected for. is it for " BEC" ..?
as its perfectly working with all four channels and AUX1. i stay at a farm pretty far from city and live on " 2G " RCB manual is 55mb and ... cant get to download that. Title: Re: Avionic 7c Rx tx help Post by: SK1701 on November 24, 2014, 08:24:27 AM Most ESCs have a built in BEC. The servo type lead from the ESC has three wires- red for power, black/brown for ground (these two together are the BEC) and white for signal. You generally can power the receiver by connecting your ESCs servo lead to the throttle channel. You could also power the receiver from the BATT connector with the same lead from your ESC such as when you are binding the Tx and Rx. Be very careful with the polarity since it easy to fry your receiver.
EDIT: I forgot to mention that the BATT channel is also used if you are powering your receiver from a separate LiPo and using a servo on the throttle channel such as in an engine powered craft. Title: Re: Avionic 7c Rx tx help Post by: sooraj.palakkad on November 24, 2014, 08:32:26 AM +1, SK1701
|